• Imaging Science in Dentistry
• /
• v.44 no.3
• /
• pp.207-212
• /
• 2014

Purpose: This study aimed to investigate the deviation of landmarks from horizontal or midsagittal reference planes according to the methods of establishing reference planes. Materials and Methods: Computed tomography (CT) scans of 18 patients who received orthodontic and orthognathic surgical treatment were reviewed. Each CT scan was reconstructed by three methods for establishing three orthogonal reference planes (namely, the horizontal, midsagittal, and coronal reference planes). The horizontal (bilateral porions and bilateral orbitales) and midsagittal (crista galli, nasion, prechiasmatic point, opisthion, and anterior nasal spine) landmarks were identified on each CT scan. Vertical deviation of the horizontal landmarks and horizontal deviation of the midsagittal landmarks were measured. Results: The porion and orbitale, which were not involved in establishing the horizontal reference plane, were found to deviate vertically from the horizontal reference plane in the three methods. The midsagittal landmarks, which were not used for the midsagittal reference plane, deviated horizontally from the midsagittal reference plane in the three methods. Conclusion: In a three-dimensional facial analysis, the vertical and horizontal deviations of the landmarks from the horizontal and midsagittal reference planes could vary depending on the methods of establishing reference planes.

• The korean journal of orthodontics
• /
• v.42 no.2
• /
• pp.56-63
• /
• 2012

Objective: To identify the right and left difference of the facial soft tissue landmarks three-dimensionally from the subjects of normal occlusion individuals. Materials and Methods: Cone-beam computed tomography (CT) scans were obtained in 48 normal occlusion adults (24 men, 24 women), and reconstructed into 3-dimensional (3D) models by using a 3D image soft ware. 3D position of 27 soft tissue landmarks, 9 midline and 9 pairs of bilateral landmarks, were identified in 3D coordination system, and their right and left differences were calculated and analyzed. Results: The right and left difference values derived from the study ranged from 0.6 to 4.6 mm indicating a high variability according to the landmarks. In general, the values showed a tendency to increase according to the lower and lateral positioning of the landmarks in the face. Overall differences were determined not only by transverse differences but also by sagittal and vertical differences, indicating that 3D evaluation would be essential in the facial soft tissue analysis. Conclusions: Means and standard deviations of the right and left difference of facial soft tissue landmarks derived from this study can be used as the diagnostic standard values for the evaluation of facial asymmetry.

• Archives of Plastic Surgery
• /
• v.35 no.4
• /
• pp.423-430
• /
• 2008

Purpose: Computed tomography theoretically should improve detection of foreign bodies and provide more information of adjacent soft tissues. And the CT scanner and PACS program proved to be an excellent instrument for detection and localization of most facial foreign bodies above certain minimum levels of detectability. The severity of injury in penetrating trauma to the face, it is often underestimated by physical examination. Diagnosis of a retained foreign object is always critical. Methods: From March, 2005 to February 2008 a study was done with 200 patients who had facial trauma. Axial and coronal CT images were obtained with a General Electric(Milwaukee, Wis) 9800 CT scanner at 130 kV, 90 mA, with a 2-mm section thickness and a $512{\times}512$ matrix. Results: Axial and coronal CT images at various window widths should be used as the first imaging modality to detect facial foreign bodies. The attenuation coefficients for the metallic and nonmetallic foreign bodies ranged from -437 to +3071 HU. As a general rule, metallic foreign bodies produced more Hounsfield artifacts than nonmetallic foreign bodies, thus providing a clue to their composition. All of the metallic foreign bodies were represented by a single peak and had a maximum attenuation coefficient of +3071 HU. Of the nonmetallic foreign bodies, glass had an attenuation coefficient that ranged from +105 to +2039, while plastic had a much lower coefficient that ranged from -62 to -35. wood had the lowest range of attenuation coefficients: -491 to -437. Conclusion: The PACS program allows one to distinguish metallic from nonmetallic foreign bodies and to individually identify the specific composition of many nonmetallic foreign bodies. This program does not, however, allow identification of the specific composition of a metallic foreign body. We recommend this type of software program for CT scanning of any patient with an injury to the face in which a foreign body is suspected.

• Journal of Korean Neurosurgical Society
• /
• v.40 no.2
• /
• pp.125-127
• /
• 2006

Facial nerve schwannomas are uncommon tumors. A 40-year-old female presented with left-side facial weakness. Computed tomography[CT] imaging showed a $3\;{\times}\;2cm$ lesion on the posterior portion of the left middle cranial fossa. The mass abutted the anterior aspect of the left petrous bone with a wide erosive change involving the area of the left facial nerve ganglion [geniculate ganglion]. A well-circumscribed extra-axial mass was seen on magnetic resonance imaging[MRI]. The tumor was completely removed through subtemporal approach and the patient was discharged without additional neurological deficit. This rare case is discussed and a review of the relevant literature is presented.

• Journal of Oral Medicine and Pain
• /
• v.26 no.2
• /
• pp.157-160
• /
• 2001

Facial nerve paralysis(or Bell's palsy) which commonly occurs unilaterally, gives rise to paralysis of facial expression muscle. This condition is classified into symptomatic facial nerve paralysis due to intracranial tumor, post operative trauma, etc. and idiopathic facial nerve paralysis. To explain the etiology of idiopathic facial nerve paralysis, many hypothesis including ischemic theory, viral infection, exposure to cold, immune theory etc. were suggested, but there is no agreement at this point. The method to evaluate the facial nerve paralysis, when it occurs, consists of three stage scale method, image thechnics like CT and MRI, laboratory test to examine the antibody titers of viral infection, neurophysiologic test to evaluate the degree and prognosis of paralysis. Treatment includes medication, stellate ganglion block(SGB), surgery, physical therapy and other home care therapy. In medication, systemic steroids, vitamins, vasodilating-drug and ATP drugs were used. SGB was also used repeatedly to attempt the improvement of circulation and to stimulate the recovery of nerve function. Physical therapy including electric acupuncture stimulation therapy(EAST) and hot pack was used to prevent the muscle atrophy. When No response was showed to this conservative therapies, surgery was considered. After treating two patients complaining of Bell's palsy with medication(systemic steroids) and EAST, favorable result was obtained. so author report the case of facial nerve paralysis.

• Journal of International Society for Simulation Surgery
• /
• v.3 no.1
• /
• pp.36-38
• /
• 2016

Fibrous dysplasia is a relatively rare disease but the management would be quite challenging. Because this is not a malignant tumor, the preservation of the facial contour and the various functions seems to be important in treatment planning. Until now the facial bone reconstruction with autogenous bone would be the standard. Although the autogenous bone would be the ideal one for facial bone reconstruction, donor site morbidity would be the inevitable problem in many cases. Meanwhile, various types of allogenic and alloplastic materials have been also used. However, facial bone reconstruction with many alloplastic material have produced no less complications including infection, exposure, and delayed wound healing. Because the 3D printing technique evolved so fast that 3D printed titanium implant were possible recently. The aim of this trial is to try to restore the original maxillary anatomy as possible using the 3D printing model, based on the mirrored three dimensional CT images based on the computer simulation. Preoperative computed tomography (CT) data were processed for the patient and a rapid prototyping (RP) model was produced. At the same time, the uninjured side was mirrored and superimposed onto the traumatized side, to create a mirror-image of the RP model. And we molded Titanium mesh to reconstruct three-dimensional maxillary structure during the operation. This prefabricated Titanium-mesh implant was then inserted onto the defected maxilla and fixed. Three dimensional printing technique of titanium material based on the computer simulation turned out to be successful in this patient. Individualized approach for each patient could be an ideal way to restore the facial bone.

• The Journal of the Korean dental association
• /
• v.51 no.6
• /
• pp.302-312
• /
• 2013

It has been established that disk displacement of the temporomandibular joint(TMJ) can cause mandibular asymmetry in growing subjects. One of the causes of internal derangement of TMJ seems to be the result of poor positioning of the joint structure in unilateral cross bite, and the subsequent occlusal trauma transferred to the functioning unit of the mandible, the joint and disc. Transverse discrepancy of the maxillary and the mandibular posterior dentoalveolar units was often found in mandibular asymmetric subjects. Most of the asymmetry in growing subjects becomes worse with further growth if left untreated. However once sufficient posterior overjet is gained through orthodontic treatment, many cases have shown improvement in facial asymmetry. Furthermore, the position of condyles in computed tomogram(con-beam CT) changed from anatomically unfavorable position to more concentric position.

• The korean journal of orthodontics
• /
• v.35 no.2 s.109
• /
• pp.91-105
• /
• 2005

For af accurate diagnosis and treatment planning of facial asymmetry, the use of 3-dimensional (3-D) image is indispensable. The purpose of this study was to get standard data for the 3-D analysis of facial asymmetry Computerized tomography (CT) was taken in the 60 normal occlusion individuals (30 male. 30 female) who did not have any apparent facial asymmetry. The acquired 2D CT DICOM data were input on a computer, and the reformatted 3-D images were created using a 3-D image software. Twenty three measurements were established in order to evaluate asymmetry; 15 ;omear measurements (6 for ramus length. 1 for condylar neck length, and 8 for mandibular body length) and 8 angular measurements (4 for gonial angle. 2 for frontal ramal inclination. and 2 for lateral ramal inclination) The right aid left difference of each measurement was calculated and analyzed. It is suggested that the right and left differences of the measurements obtained from the study could be used as references for the diagnosis of facial asymmetric patients.

• Archives of Craniofacial Surgery
• /
• v.17 no.1
• /
• pp.9-13
• /
• 2016

Background: Position of the facial foramina is important for regional block and for various maxillofacial surgical procedures. In this study, we report on anthropometry and morphology of these foramina using three-dimensional computed tomography (3D-CT) data. Methods: A retrospective review was performed for all patients who have undergone 3D-CT scan of the facial skeleton for reasons other than fracture or deformity of the facial skeleton. Anthropometry of the supraorbital, infraorbital, and mental foramina (SOF, IOF, MF) were described in relation to facial midline, inferior orbital margin, and inferior mandibular margin (FM, IOM, IMM). This data was analyzed according to sex and age. Additionally, infraorbital and mental foramen were classified into 5 positions based on the anatomic relationships to the nearest perpendicular dentition. Results: The review identified 137 patients meeting study criteria. Supraorbital foramina was more often in the shape of a foramen (62%) than that of a notch (38%). The supraorbital, infraorbital, and mental foramina were located 33.7 mm, 37.1 mm, and 33.7 mm away from the midline. The mean vertical distance between IOF and IOM was 13.4 mm. The mean distance between MF and IMM was 21.0 mm. The IOF and MF most commonly coincided with upper and lower second premolar dentition, respectively. Between the sex, the distance between MF and IMM was significantly higher for males than for female. In a correlation analysis, SOF-FM, IOF-FM and MF-FM values were significantly increased with age, but IOF-IOM values were significantly decreased with age. Conclusion: In the current study, we have reported anthropometric data concerning facial foramina in the Korean population, using a large-scale data analysis of three-dimensional computed tomography of facial skeletons. The correlations made respect to patient sex and age will provide help to operating surgeons when considering nerve blocks and periosteal dissections around the facial foramina.

• Archives of Craniofacial Surgery
• /
• v.20 no.5
• /
• pp.332-335
• /
• 2019

Cellulitis, one of most common diseases of everyday life, is often overlooked for its significance. Although cellulitis does not cause or lead to serious problems usually, its possibility to cause lifethreatening problem should be known. In present case, a patient who had received acupuncture treatment a week earlier presented to the clinic with symptoms of facial cellulitis. The disease resolved within few weeks under empirical antibiotic treatment but recurred after 3 months. Under close history review of the patient, we found out that the patient had received craniectomy 20 years ago. The patient had blunt headache with no other neurological symptoms that could suspect cranial infection, but considering the risk originating from the patient's surgical history, brain computed tomography (CT) was taken. CT images revealed abscess formation in the subgaleal and epidural spaces. Craniotomy with abscess evacuation was done promptly. With additional antibiotic treatment postoperatively, the disease resolved, and the 1-month postoperative followup brain CT showed no signs of abscess formation.