• 제목/요약/키워드: Face-reinforced

검색결과 219건 처리시간 0.031초

Non-linear dynamic assessment of low-rise RC building model under sequential ground motions

  • Haider, Syed Muhammad Bilal;Nizamani, Zafarullah;Yip, Chun Chieh
    • Structural Engineering and Mechanics
    • /
    • 제74권6호
    • /
    • pp.789-807
    • /
    • 2020
  • Multiple earthquakes that occur during short seismic intervals affect the inelastic behavior of the structures. Sequential ground motions against the single earthquake event cause the building structure to face loss in stiffness and its strength. Although, numerous research studies had been conducted in this research area but still significant limitations exist such as: 1) use of traditional design procedure which usually considers single seismic excitation; 2) selecting a seismic excitation data based on earthquake events occurred at another place and time. Therefore, it is important to study the effects of successive ground motions on the framed structures. The objective of this study is to overcome the aforementioned limitations through testing a two storey RC building structural model scaled down to 1/10 ratio through a similitude relation. The scaled model is examined using a shaking table. Thereafter, the experimental model results are validated with simulated results using ETABS software. The test framed specimen is subjected to sequential five artificial and four real-time earthquake motions. Dynamic response history analysis has been conducted to investigate the i) observed response and crack pattern; ii) maximum displacement; iii) residual displacement; iv) Interstorey drift ratio and damage limitation. The results of the study conclude that the low-rise building model has ability to resist successive artificial ground motion from its strength. Sequential artificial ground motions cause the framed structure to displace each storey twice in correlation with vary first artificial seismic vibration. The displacement parameters showed that real-time successive ground motions have a limited impact on the low-rise reinforced concrete model. The finding shows that traditional seismic design EC8 requires to reconsider the traditional design procedure.

Forced vibration of a sandwich Timoshenko beam made of GPLRC and porous core

  • Mohammad Safari;Mehdi Mohammadimehr;Hossein Ashrafi
    • Structural Engineering and Mechanics
    • /
    • 제88권1호
    • /
    • pp.1-12
    • /
    • 2023
  • In this study, forced vibration behavior of a piezo magneto electric sandwich Timoshenko beam is investigated. It is assumed a sandwich beam with porous core and graphene platelet reinforced composite (GPLRC) in facesheets subjected to magneto-electro-elastic and temperature-dependent material properties. The magneto electro platelets are under linear function along with the thickness that includes a cosine function and magnetic and electric constant potentials. The governing equations of motion are derived using modified strain gradient theory for microstructures. The effects of material length scale parameters, temperature change, different distributions of porous, various patterns of graphene platelets, and the core to face sheets thickness ratio on the natural frequency and excited frequency of a sandwich Timoshenko beam are scrutinized. Various size-dependent methods effects such as MSGT, MCST, and CT on the natural frequency is considered. Moreover, the final results affirm that the increase in porosity coefficient and volume fractions lead to an increase in the amount of natural frequency; while vice versa for the increment in the aspect ratio. From forced vibration analysis, it is understood that by increasing the values of volume fraction and the length thickness of GPL, the maximum deflection of a sandwich beam decreases. Also, it is concluded that increasing the temperature, the thickness of GPL, and the initial force leads to a decrease in the maximum deflection of GPL. It is also shown that resonance phenomenon occurs when the natural and excitation frequencies become equal to each other. Outcomes also reveal that the third natural frequency owns the minimum value of both deflection and frequency ratio and the first natural frequency has the maximum.

표면매입 및 외부부착 탄소섬유판으로 보강된 RC보의 휨 거동에 관한 실험 연구 (An Experimental Study on the Flexural Behavior of RC Beams Strengthened with NSM and EBR CFRP Strips)

  • 임동환
    • 콘크리트학회논문집
    • /
    • 제20권5호
    • /
    • pp.601-609
    • /
    • 2008
  • 본 연구에서는 탄소섬유판 표면 매입 공법 및 외부 부착공법의 장점을 활용하기 위하여, 새로운 형상의 탄소섬유판을 제작하여 실험을 수행하였으며, 탄소섬유판 표면 매입 및 외부 부착이 혼합된 보강 방식의 휨 거동 효과를 분석하였다. 본 연구 결과, 표면매입 (NSM) 및 표면부착 (EBR) 탄소섬유판이 결합한 T형 탄소섬유판으로 보강된 철근콘크리트 부재의 휨 강성 및 극한강도는 섬유판으로 보강되지 않은 보에 비하여 크게 증진되며, 그 최대 증가율은 보강되지 않은 부재의 경우보다 약 347%로 나타났다. 이는 매입 (NSM) 및 부착 (EBR) 탄소섬유판의 상호 구속 효과가 매우 뛰어나 하중을 분배하여 따라서 저항 능력이 크게 개선되는 것으로 판단되었다. 또한 T형 탄소섬유판으로 보강된 철근콘크리트 부재의 파괴는 표면부착 탄소섬유판의 부착 탈락으로 시작되며, 단계적으로 매입 섬유판의 파괴되면서 전단부 콘크리트 피복이 탈락하는 파괴양상으로 나타났다. 매입 탄소섬유판 (NSM CFRP strip) 및 표면부착 (EBR) 탄소판의 극한변형률은 각각 $8,600{\mu}{\varepsilon}{\sim}22,000{\mu}{\varepsilon}$$7,000{\sim}9,000{\mu}{\varepsilon}$의 범주로 나타나 하중 분배 능력이 우수하며, 따라서 노후 구조물 보강방식으로 효과적인 것으로 판단된다.

GRS-RW 보강토벽체 공법의 준3차원 안정해석 (Quasi-Three Dimensional Stability Analysis of the Geosynthetic-Reinforced Soil Retaining Wall System)

  • 김홍택;박준용
    • 한국지반공학회지:지반
    • /
    • 제14권4호
    • /
    • pp.177-204
    • /
    • 1998
  • 본 연구에서는, GRS-RW 보강토벽체 공법에 대한 안정해석법의 체계화를 위해 3차원 예상파괴 흙쐐기를 가정하여, 직선부구간 뿐만 아니라 특히 편기각 보강재가 설치되는 곡선부 구간에 대해 적용 가능한 준3차원 안정성 평가기법의 제시가 이루어졌다. 아울러, 본 연구 제시 안정해석법에 의해 평가되는 작용토압합력을 다짐토압 분포형태로 가정하여, 1차원 유한요소해석을 이용한 전면 벽체의 변위예측기법을 제시하였다. 또한 제시된 전면벽체 변위예측기법의 타당성을 확인하기 위해, 캐나다의 RMC 및 미국의 FHWA에서 시행한 시험결과와 본 연구 제시기법에 의한 예측치를 서로 비교하였으며, 본 비교에는 기존의 보강토벽체 발생변위 평가방법인 Christopher등의 방법 및 Chew & Mitchell의 방법 등을 토대로 한 예측치도 추가 검토상의 목적으로 포함하였다. 또한 편기각 보강재가 설치되는 볼록형태 곡선부 구간에 대해서, 본 연구 예측치와 $FLAC_{3D}$프로그램 해석결 과와의 비교를 퉁해, 본 연구 변위예측기법의 신뢰성 검증이 추가로 이루어졌다. 이외에도, 본 연 구 제시 안정해석 법에 의해 평가되는 전면벽체의 작용토압합력을 깊이별 다짐토압 분포형태로 가정한 기법의 타당성 확인을 위해, FHWA에서 제시한 발생토압 측정결과와 서로 비교하였다. 아울러 다양한 관련 설계변수가 GRS-RW 보강토벽체의 안정성에 미치는 영향등을 분석하였다.

  • PDF

섬유시트로 보강된 T형 철근콘크리트보의 휨 강도 해석 (Flexural Strength Analysis of RC T-Beams Strengthened Using Fiber Sheets)

  • 박대효;이규철
    • 콘크리트학회논문집
    • /
    • 제15권2호
    • /
    • pp.234-245
    • /
    • 2003
  • 대부분의 콘크리트 교량 구조물은 과도한 교통량과 구조물의 사용수명의 도래로 손상된다. 콘크리트의 손상은 철근의 부식과 콘크리트와 철근의 분리로 인하여 성능저하 촉진의 원인이 된다. 손상된 콘크리트 구조물의 빠른 복원은 콘크리트 구조 체계에서 콘크리트 성능저하의 심화를 막기 위하여 매우 중요하게 되었다. 최근 섬유시트는 고인장강도, 내구성, 부식저항성, 경량성, 제작편리성, 비용절감, 균열 제어, 두께 대비 고강도, 사용성 등의 많은 장점이 원인이 되어 손상된 콘크리트 구조물의 보강에 널리 사용되고 있다. 그러나 섬유시트 보강에 따른 공칭휨모멘트 성능을 예측하는 방법에 대한 해석과정의 결여로 구조물의 보강 과정에서 효과적인 인자의 결정이 어렵게 된다. 본 연구에서는 T형 철근콘크리트보의 보강을 위해 부재의 밑면에 부착된 섬유시트가 휨 강도에 미치게 되는 영향이 연구된다. 또한 밑면섬유시트의 박리 방지를 위해 감싸는 섬유시트의 옆면부분에 의한 부수적인 휨 보강 효과가 이론적으로 조사된다. 제안한 접근방법을 입증하기 위하여 해석 결과가 참고된 다른 실험연구의 결과와 비교된다. 예측된 결과와 실험결과는 잘 일치하였다.

앵커볼트 체결 Slit형 강판 보강 RC보의 전단거동에 관한 실험적 연구 (An Experimental Study on the Shear Behavior of Reinforced Concrete Beams Strengthened by Slit Type Steel Plates with Anchor Bolt)

  • 이춘호;정우동;심종석
    • 콘크리트학회논문집
    • /
    • 제22권5호
    • /
    • pp.703-710
    • /
    • 2010
  • 기존 구조물에서 RC보는 여러 가지 이유로 불충분한 전단에 대한 문제에 직면하게 된다. 전단내력이 부족한 RC보의 전단 보강방법으로 강판이 널리 사용되고 있다. 본 연구에서는 앵커볼트가 체결된 경사, 수직 슬릿형 강판의 표면부착에 의해 전단보강된 RC보에 대한 실험을 하였으며, 여러 형태의 앵커볼트 체결 슬릿형 강판으로 보강된 RC보에 대한 전단보강효과, 파괴모드 및 전단내력을 평가하는 것을 연구의 목적으로 하였다. 실험의 변수는 앵커볼트가 부착된 슬릿의 폭, 간격, 경사각 및 수직 길이로 하였다. 연구 결과, 에폭시 부착과 볼트 체결로 보강된 슬릿형 강판 실험체의 파괴 유형은 최대하중 시 전단파괴 모드로 나타났다. 휨균열은 보의 인장측에서 최초로 발생하였으며, 경사 균열은 전단스팬에서 발생하였다. 최종적으로 에폭시 부착과 볼트 체결로 보강된 슬릿형 강판에서의 급격한 박리현상은 지연되었으며, RC보의 본체로부터 완전하게 분리 되지는 않음을 알 수 있었다.

Transverse reinforcement for confinement at plastic hinge of circular composite hollow RC columns

  • Won, Deok Hee;Han, Taek Hee;Kim, Seungjun;Park, Woo-Sun;Kang, Young Jong
    • Computers and Concrete
    • /
    • 제17권3호
    • /
    • pp.387-406
    • /
    • 2016
  • Confined transverse reinforcement was arranged in a plastic hinge region to resist the lateral load that increased the lateral confinement effect in the bridge substructure. Columns increased the seismic performance through securing stiffness and ductility. The calculation method of transverse reinforcements at plastic hinges is reported in the AASHTO-LRFD specification. This specification was only proposed for solid reinforced concrete (RC) columns. Therefore, if this specification is applied for another column as composite column besides the solid RC column, the column cannot be properly evaluated. The application of this specification is particularly limited for composite hollow RC columns. The composite hollow RC column consists of transverse, longitudinal reinforcements, cover concrete, core concrete, and an inner tube inserted in the hollow face. It increases the ductility, strength, and stiffness in composite hollow RC columns. This paper proposes a modified equation for economics and rational design through investigation of displacement ductility when applying the existing specifications at the composite hollow RC column. Moreover, a parametric study was performed to evaluate the detailed behavior. Using these results, a calculation method of economic transverse reinforcements is proposed.

Bending and buckling analysis of sandwich Reddy beam considering shape memory alloy wires and porosity resting on Vlasov's foundation

  • Bamdad, Mostafa;Mohammadimehr, Mehdi;Alambeigi, Kazem
    • Steel and Composite Structures
    • /
    • 재36권6호
    • /
    • pp.671-687
    • /
    • 2020
  • The aim of this research is to analyze buckling and bending behavior of a sandwich Reddy beam with porous core and composite face sheets reinforced by boron nitride nanotubes (BNNTs) and shape memory alloy (SMA) wires resting on Vlasov's foundation. To this end, first, displacement field's equations are written based on the higher-order shear deformation theory (HSDT). And also, to model the SMA wire properties, constitutive equation of Brinson is used. Then, by utilizing the principle of minimum potential energy, the governing equations are derived and also, Navier's analytical solution is applied to solve the governing equations of the sandwich beam. The effect of some important parameters such as SMA temperature, the volume fraction of SMA, the coefficient of porosity, different patterns of BNNTs and porous distributions on the behavior of buckling and bending of the sandwich beam are investigated. The obtained results show that when SMA wires are in martensite phase, the maximum deflection of the sandwich beam decreases and the critical buckling load increases significantly. Furthermore, the porosity coefficient plays an important role in the maximum deflection and the critical buckling load. It is concluded that increasing porosity coefficient, regardless of porous distribution, leads to an increase in the critical buckling load and a decrease in the maximum deflection of the sandwich beam.

An Experimental Study to Prevent Debonding Failure of Full-Scale RC Beam Strengthened with Multi-Layer CFS

  • You Young-Chan;Choi Ki-Sun;Kim Keung-Hwan
    • 콘크리트학회논문집
    • /
    • 제16권6호
    • /
    • pp.867-873
    • /
    • 2004
  • It has been known that debonding failures between CFS(Carbon Fiber Sheet) and concrete in the strengthened RC beams are initiated by the peeling of the sheets in the region of combined large moment and shear forces, being accompanied by the large shear deformation after flexural cracks. These shear deformation effects are seldom occurred in small-scale model tests, but debondings due to the large shear deformation effects are often observed in a full-scale model tests. The premature debonding failure of CFS, therefore, must be avoided to confirm the design strength of full-scale RC beam in strengthening designs. The reinforcing details, so- called 'U-Shape fiber wrap at mid-span' which wrapped the RC flexural members around the webs and tension face at critical section with CFS additionally, were proposed in this study to prevent the debonding of CFS. Other reinforcing detail, so called 'U-Shape fiber wrap at beam end' were included in this tests and comparisons were made between them.

Behavior of continuous RC deep girders that support walls with long end shear spans

  • Lee, Han-Seon;Ko, Dong-Woo;Sun, Sung-Min
    • Structural Engineering and Mechanics
    • /
    • 제38권4호
    • /
    • pp.385-403
    • /
    • 2011
  • Continuous deep girders which transmit the gravity load from the upper wall to the lower columns have frequently long end shear spans between the boundary of the upper wall and the face of the lower column. This paper presents the results of tests and analyses performed on three 1:2.5 scale specimens with long end shear spans, (the ratios of shear-span/total depth: 1.8 < a/h < 2.5): one designed by the conventional approach using the beam theory and two by the strut-and-tie approach. The conclusions are as follows: (1) the yielding strength of the continuous RC deep girders is controlled by the tensile yielding of the bottom longitudinal reinforcements, being much larger than the nominal strength predicted by using the section analysis of the girder section only or using the strut-and-tie model based on elastic-analysis stress distribution. (2) The ultimate strengths are 22% to 26% larger than the yielding strength. This additional strength derives from the strain hardening of yielded reinforcements and the shear resistance due to continuity with the adjacent span. (3) The pattern of shear force flow and failure mode in shear zone varies depending on the amount of vertical shear reinforcement. And (4) it is necessary to take into account the existence of the upper wall in the analysis and design of the deep continuous transfer girders that support the upper wall with a long end shear span.