• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.241-248
• /
• 2001

The ductility of circular hollow reinforced concrete columns with one layer of longitudinal and spiral reinforcement placed near the outside face of the section and the steel tube placed on the inside face of the section is investigated. Such hollow sections are confined through the wall thickness since the steel tube is placed. The results of analytical moment-curvature analyses for such hollow sections are compared with those for the circular section with the sane diameter. In this study, moment-curvature analyses are conducted with Mandel's confined concrete stress-strain relationship in which the effect of confinement is to increase the compression strength and ultimate strain of concrete. The moment-curvature analyses confirmed that the ductility is primarily influenced on the ultimate strain. The variables influenced on the ultimate strain is the ratio and yield strength of confining reinforcement and the compression strength for confined concrete. From this ultimate strain - the transverse reinforcement ratio relationship, the transverse reinforcement ratio for circular hollow reinforced columns with confinement is proposed. The proposed transverse reinforcement ratio is confirmed by experimental results.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.19-21
• /
• 2008

본 논문에서는 테이블 형이 아닌 스탠드형 테이블 탑 디스플레이에 대한 연구를 다루고 있다. 스크린에 대한 터치를 인식으로 입력을 받아들이므로 TouchFace III 라고 명명하고 있으며, 기존에 개발되었던 두 대의 테이블 탑 디스플레이와는 형태에서 차별을 두고 있다. TouchFace III 시스템은 FTIR(Frustrated Total Internal Reflection : 내부 전반사 장애 현상) 방식이 아닌 TouchLight방식과 HoloWall방식을 조합하여 시스템을 구성하였다. 그래서 스크린에서의 직접적인 손터치 뿐만 아니라, 스크린에 반사되는 손형상에 대한 제스처까지도 인식할 수 있도록 연구중에 있다. 이는 협업을 강조하는 테이블 탑 디스플레이의 컨셉에 어울리며 한 디바이스를 이용하여 동시에 여러사용자가 디바이스를 조작하는 것을 가능하게 한다.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.12
• /
• pp.7-13
• /
• 2019

In the case of the drilled shaft, one of the methods for calculating unit skin friction stress of rock socket parts is to measure the roughness of the excavated face. This method is to estimate the unit skin frictional resistance using a device which measures the roughness shape of the excavated face in the excavation step. In this study, the roughness shapes of the face of the rock socket part in the drilled shaft were measured directly in the perforated hole and the results are used to identify the characteristics of the unit skin friction of the bedrock. In addition, the static load test and the load transfer test were performed on the same pile to verify the result of the roughness test.

• Journal of architectural history
• /
• v.10 no.2 s.26
• /
• pp.21-34
• /
• 2001

The purpose of this study is that it is made clear the construction method of Japanese Castle Architecture in Korea as I study the construction method of Suncheon-Japanese Castle(順天倭城) in those days of Jeong-yu Japanese Invasion. Moreover, I intend to analyze the similarity and the difference between Suncheon-Japanese Castle and Korean Castle Architecture by a comparative study. The result of the study is showed that Suncheon-Japanese Castle seemed to be built with the object of a long time stay rather than it was of strategic importance for the national defense. In addition, it was different from other Japanese Castle in Korea because the watch tower(天守閣) of it stood in the middle of stronghold and the watch tower stronghold dividing the round of it while that of it stood the comer of stronghold. The face stone used in important part of watch tower, gate, and so on was mostly a trimed hexangular stone. On the other hand, the face abbuting on the Gulf of kwang-yang was made of naturally wild face stone. The stone cleared traces of Si-hyeol(矢穴) and domestic Castle in Japan was also made of this method after Im-Jin Japanese Invasion. According to the construction method, the wall of castle made use of the Netak(內托) method except the gate, the support stronghold and the watch. The early mountain castle in Korea have this construction method in common.

• Geomechanics and Engineering
• /
• v.14 no.5
• /
• pp.407-419
• /
• 2018

In order to investigate flow characteristics after water inrush from the working face in process of karst tunnel construction, numerical calculation for two class case studies of water inrush is carried out by using the FLUENT software on the background of Qiyueshan tunnel. For each class water inrush from the tunnel face, five cases under different water-inrush velocity are simulated and researched. Three probing lines are selected respectively in the left tunnel, cross passage, right tunnel and in the height direction of the tunnel centerline. The variation characteristics of velocity and pressure on each probing line under the five water-inrush velocities are analyzed. As for the selected four groups probing lines in the tunnels, the change rules of velocity and pressure on each group probing lines under the same water-inrush velocity are discussed. Finally, the water flow characteristics after inrush from the tunnel face are summarized by comparing the case studies. The results indicate that: (1) The velocity and pressure change greatly at the intersection area of the cross passage and the tunnels. (2) The velocity nearby the tunnel side wall is the minimum, while it is the maximum in the middle position. (3) The pressure value of every cross section in the tunnels is basically fixed. (4) As water-inrush velocity increases, the flow velocity and pressure in the tunnels also increase. The former is approximately proportional to their respective water-inrush velocity, while the latter is not. The research results provide a theoretical basis for making scientific and rational escape routes.

• Journal of Plant Biology
• /
• v.37 no.2
• /
• pp.203-221
• /
• 1994

Pollen grains of 19 taxa belonging to 12 genera in 5.families of the Korean gymnosperms were investigated by LM, SEM and TEM, and their morphological characters were described and palynological keys were made for each family. From the taxonomic viewpoint, palynological characters are very available to intergeneric and intrageneric classifications since their distinctive differences in pollen shape, size, condition of surface, sculpture pattern and presence of air bladders and projection except for the intrageneric classification of the genus Pinus since the overlapped characters such as pollen size and sculpture pattern. Pollen grains of Picea koraiensis in the family Pinaceae are distinguished from thc genera Pinus and Abies for the reasons that shape of air bladders are irregular, air bladders are bigger than pollen body, and pollen wall is thin. Compared with the genera Abies and Pinus that have air bladders, Picea koraiensis is closely related to Abies in that pollen body wall become gradually thin from pole of proximal face to air bladder, surface of pollen body is not rough, and pollen size is similar to that of the genus Abies. The presence of ektexine and enexine in proximal face, and the connections of the former to air bladder wall and the latter to distal face were elucidated by the investigation of pollen grains with air bladders through TEM. Endexine of the families of Taxaceae, Taxodiaceae and Cupressaceae was also obse-rved as a pile of laminae. From the observation by SEM, sculpture pattern of air bladder was foveolate with fine pits on surface. Sculpture pattern of air bladder is reticulate under LM, but observed by TEM, it resulted from the transmission of netted structure in air bladder.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.3
• /
• pp.79-85
• /
• 2007

This paper addresses the indoor air quality when radiant floor heating is applied in large space. Radiant heat exchange between surfaces depends on the orientation and the temperature of the surfaces. Also, the temperature and the radiant characteristic of the wall and the roof that face the floor have great influence on the indoor air environment due to the largeness of the wall and the roof in large spaces. In this study, we simulate a test-cell(25X20X10) using a ies YE And using a CFD(microflo in VE), an indoor air environment was investigated to establish the optimum temperature of floor. At the first time of the heating, high floor temperature is demanded. At the middle of the heating, however, the temperature of the residential space was formed appropriately, although the temperature of the floor was set low.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.06a
• /
• pp.119-127
• /
• 2003

For the calculation of internal stability, the hypothesis in conventional design is on the basis of two distinct zones, which are‘active zone’and‘passive zone’. This means that there is an abrupt discontinuous transition from active to passive states across a potential failure line. The existence of a discontinuity of this nature appears physically unreasonable, especially from kinematic considerations. A series of pull-out model tests was undertaken from a wall being rotated about the toe to find the strain distribution mobilized from near the wall face into the deep, stable zone through the centre plane. With this finding of transition zone, the objective of study is aiming at identifying the likely effect of this zone in designing method by comparing with the prevailing design method.

• Architectural research
• /
• v.19 no.4
• /
• pp.89-94
• /
• 2017

In Korea, it is necessary to improve the performance of buildings with respect to the energy efficiency while improving the quality of occupants' lives through a sustainable built environment. During the design and development process, building projects must have a comprehensive, integrated perspective that seeks to reduce heating, cooling and lighting loads through climate-responsive designs. The aim of this study is to assess the optimal window-to-wall ratio of multi-rise residential units in the early design phase in Korea. The study analyzed the variation of annual heating and cooling energy load in two apartment prototype units located in Seoul city using different WWRs. The analysis was conducted using Autodesk Ecotect Analysis 2011 tool. The study found for total annual building load reductions WWR on the south and north face should be studied independently based on the room function. It also found reducing the WWR for bedrooms and windows on the northern façade resulted in reduced total annual building load.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1207-1212
• /
• 2004

For the design of Aluminium pool furnace, position of burner and pool depth effects on flow and temperature field in Aluminium pool furnace are examined by the commercial computational code, CFD-ACE+. From the results, position of burner which is on the same face in side wall is better to distribute the flow field in Al furnace. That yields temperature to distribute more uniformly. And the burner position is on upper wall, fire frame reach pool surface. Customer must consider that, because it make Aluminium to oxidize.