• 한국안전학회지
• /
• 제15권2호
• /
• pp.51-58
• /
• 2000

Recently, the J/T analysis based on elastic-plastic finite element analysis is popularly used in the nuclear industry to assess the integrity of a cracked pipe. The objective of this paper is to evaluate the effect of stress-strain curve for weld metal, variation of crack incremental length(${\delta}a$), and crack face pressure on the J/T analysis result. For this purpose, a parametric analysis was performed and the results calculated from finite element analysis were compared with those from the piping experimental data(stainless steel weldment pipe with circumferential through-wall crack). The numerical result using base metal material property is in agreement with the experimental one and the maximum load is decreased as the ${\delta}a$ for J/T analysis is increased.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.623-626
• /
• 2004

The purpose of this paper is to study the effect of longitudinal reinforcement for anchoring in the wide beam column joint as wall as the contribution of depth of spandrel beam to hysteretic behavior of the wide beam column joint. From the test it was shown that the specimen with anchorage in the joint had higher strength than the specimen with normal hook anchorage. Specimen with debonded reinforcement at out of Id from column face failed showing moved plastic hinge and less strength than normal specimen. However, the dissipated energy was increased $11\%$.

• 패션비즈니스
• /
• 제25권6호
• /
• pp.1-12
• /
• 2021

The purpose of this study examines the fashion-related concerns of women in their early twenties and their personal thoughts on sociocultural factors through fashion. Data were collected twenty-seven female participants in their twenties in order to examine their traumas related to fashion and how these experiences affect their attitude toward clothing and fashion. Based on this, this study sheds light on what effects traumatic experiences have had on participants' self-esteem. It also provides an in-depth analysis of the problems underlying and reasons for the study participants' fashion choices, and attempts to demonstrate their self-reflection through fashion. Finding of the study was that the participants had a passive attitude toward fashion and built a wall against it. The study results suggest that the very first step to going beyond oneself and developing an active attitude is to try to be proactive and face a challenge related to fashion or clothes that one chooses oneself. Therefore, it is now time for Korean society to shape a culture that respects the unique qualities of every individual and allows free expression of diversity.

• 국제초고층학회논문집
• /
• 제12권3호
• /
• pp.263-272
• /
• 2023

Role of architecture should not be limited to function of providing an inhabitable space but also include urban and social role of its impact to the public and surrounding area. Role of landmark building should be further expanded beyond and landmark building speaks out its aesthetics with mass form and/or with its appearance of façade. With study of this project, idea of landmark building is shifted from vertical extrusion of the land to horizontal extrusion of large space from the face of building. It is a double extrusion creating large assembly space up in the air linking surrounding masses.

• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.962-969
• /
• 2013

본 연구에서는 전산유체역학(CFD)를 이용하여 흄후드(fume hood)의 기류 유입특성 및 유속 분포를 평가하였다. 또한, 후드 개구면을 균일류 형성에 필요한 구조로 개선하였을 경우의 유동 특성을 예측하여 개선 효과를 검증하였다. 기존의 흄후드의 제어유속을 평가한 결과, 제곱평균(RMS)값과 비교했을 때 최대 23~30%의 편차가 있음을 확인하였다. 또한, 후드의 상부 유속이 하부 유속보다 58~68% 정도 빠른 것으로 나타나 후드 개구면에서의 유속 불균형이 매우 심한 것으로 평가되었다. 이에 후드 개구면에서의 균일한 배기흐름을 유지하기 위해 후드를 개선(안쪽벽에 배플 설치 및 슬롯 타입의 개구부 설계)한 결과, RMS값 대비 최대 7%의 편차를 보였으며 구간별 유속 편차는 최대 12% 정도로 예측되어 기존 구조에 비해 제어유속의 불균형이 많이 해소되는 것을 확인할 수 있었다.

• Geomechanics and Engineering
• /
• 제10권4호
• /
• pp.471-526
• /
• 2016

In order to investigate water flow characteristics after inrushing in process of karst tunnel excavation, numerical simulations for five case studies of water inrush from the tunnel floor are carried out by using the FLUENT software on the background of Qiyueshan high risk karst tunnel. Firstly, the velocity-distance curves and pressure-distance curves are drawn by selecting a series of probing lines in a plane. Then, the variation characteristics of velocity and pressure are analyzed and the respective optimized escape routes are made. Finally, water flow characteristics after inrushing from the tunnel floor are discussed and summarized by comparing case studies under the conditions of different water-inrush positions and excavation situations. The results show that: (1) Tunnel constructors should first move to the tunnel side wall and then escape quickly when water inrush happens. (2) Tunnel constructors must not stay at the intersection area of the cross passage and tunnels when escaping. (3) When water inrush from floor happens in the left tunnel, if tunnel constructors meet the cross passage during escaping, they should pass through it rapidly, turn to the right tunnel and run to the entrance. (4) When water inrush from floor happens in the left tunnel, if there is not enough time to escape, tunnel constructors can run to the trolley and other equipment in the vicinity of the right tunnel working face. In addition, some rescuing equipment can be set up at the high location of the cross passage. (5) When water inrush from floor happens in the cross passage, tunnel constructors should move to the tunnel side wall quickly, turn to the tunnel without water inrush and run to the entrance. (6) When water inrush from floor happens in the cross passage, if there is not enough time to escape, tunnel constructors can run to the trolley and other equipment near by the left or the right tunnel working face. The results are of important practical significance and engineering value to ensure the safety of tunnel construction.

• 한국지반환경공학회 논문집
• /
• 제13권7호
• /
• pp.5-12
• /
• 2012

최근 국내에서 기존 RC옹벽보다 시공실적이 증가하고 있는 보강토 옹벽은 보강자재, 시공방법, 전면블럭의 형태에 따라 다양하지만 공법에 대한 안전성이 충분히 검증되지 않아 설계와 시공관리에 어려움이 많으며, 보강토 옹벽에 사용되는 보강재 등은 제조사별로 규격과 형상이 다양하고 영세한 업체에서 제작하였거나 일부 값이 싼 품질이 낮은 제품이 수입되고 있지만 이를 설계에 적용할 수 있는 적절한 기준이 제시되지 못하고 있는 실정이다. 이에 본 연구는 보강토 옹벽의 보강재인 옹벽용 그리드에 대하여 현장 내시공성 시험을 통해 다양한 형태의 옹벽용 그리드의 내시공성 감소계수를 제안하고, 국내외 연구결과 분석과 국내 시판되고 있는 제조사별로 제시한 옹벽용 그리드의 물성치를 조사 분석하였다. 결론적으로, 뒤채움재의 입경과 모난 정도의 차이, 입도 분포에 따라 감소계수에 미치는 영향이 크므로 일정규모 이상의 현장에서는 현장내시공성 시험을 거쳐 뒤채움재 별로 차별화된 감소계수를 적용하고, 보강벽체의 활용성에 따라 연성과 강성그리드를 잘 선정하여 적용함으로서 효과적으로 보강토 옹벽의 안전성을 높일 수 있음을 확인하였다.

• 건축역사연구
• /
• 제8권3호
• /
• pp.9-22
• /
• 1999

The purpose of this study is to analyse the architectural character of JE-DAMG at farm village in Ulsan. JE-DANG means the building for DONG-JE (the sacrificial rite of a village). The regions of this study are KANG-DONG MYEN, and UNG-CHON MYEN in Ulsan. The method of this study is the analysis of them after the actual field surveys of 47 JE-DANGs in these regions The survey contains the area, the height, the period of the erection, the architectural structure, the roof shape, the material, the landowner, SHIN-CHE (means a god's name and shape), DANG-SU tree and so on. Methods of the survey are the field survey, the interview of villager, the analysis of reference data and so on. Results of the study are below. JE-DANGs(buildings) of these regions had been built first in the period of Japanese occupancy and erections of them had continued until 1970's. Since then, they have been rebuilt. The primary JE-DANG is characterized by a tiled roof, a wooden post lintel, a mud-plastered wall, and a wooden door. After rebuilding, characters are a flat slab, a tiled roof, a structure of using red bricks, and the area is getting larger than the primary JE-DANG, but 1 KAN persists without variety. Most of houses in the inland area like UNG-CHON MYEN face the south, and ones in the coastal area like KANG-BONG MYEN face the east. Generally there is DANG-SU tree behind JE-DANG. That proves DANG-SU tree to be the object of the rite. The species of DANG-SU is a pine in general ,but various in UNG-CHON MYEN. In general names of the god are DONG-SHIN , DANG-SAN SHIN and SUNG-HWANG SHIN. I think that the landownership of JE-DANG should change the private ownership into the village ownership to preserve JE-DANG though most of lands of JE-DANG are private ones.

• 한국방재학회 논문집
• /
• 제3권2호
• /
• pp.127-137
• /
• 2003

구조적으로 콘크리트의 자중이 문제 시 되는 곳이나, 콘크리트의 재료비가 높은 경우, 수직부재로 중공 콘크리트의 사용이 경제적일 수 있다. 콘크리트의 구속효과를 발휘를 위해 외측 면을 띠철근으로 보강하고 내측 면에 강관을 삽입하여 보강한 원형 중공 콘크리트 기둥의 연성 거동에 관해 연구하였고, 압축강도와 콘크리트의 극한변형율을 증가시키는 구속력의 효과를 나타낸 Mander의 응력-변형률 관계를 사용하여, 모멘트-곡률 관계 해석을 유도하였다. 극한변형율에 영향을 주는 인자인 구속력을 발휘하는 철근의 철근비와 항복응력, 구속 콘크리트의 압축강도 등을 극한변형율과 횡철근비의 관계를 통하여, 강관 삽입된 원형 중공 철근콘크리트 기둥의 구속응력과 횡철근비의 관계식을 제안하였다. 제안된 횡철근비 관계식은 실험을 통하여 검증하였다.

• Current Photovoltaic Research
• /
• 제3권4호
• /
• pp.121-125
• /
• 2015

BIPV system is one of the best ways to harness PV module. The BIPV system not only produces electricity, but also acts as a building envelope. Thus, it has the strong point of increasing the economical efficiency by applying the PV modules to the buildings. Bifacial solar cells can convert solar energy to electrical energy from both sides of the module. In addition, it is designed as 3 busbar layout which is the same with ordinary mono-facial soalr cells. Therefore, many of the module manufacturers can easily produce the bifacial solar cells without changing their manufacturing equipment. Moreover, bifacial BIPV system has much potential in building application by utilizing glass to glass structure. However, the performance of bifacial solar cells depends on a variety of factors, ranging from the back surface to surrounding conditions. Therefore, in order to apply bifacial solar cells to buildings, an analysis of bifacial PV module performance should be carried out that includes a consideration of various design elements, and reflects a wide range of installation conditions. As a result it found that the white insulation reflector type can improve the performance of the bifacial BIPV system by 16%, compared to the black insulation reflector type. The performance of the bifacial BIPV was also shown to be influenced by inclination angle, due to changes in both the amount of radiation captured on the front face and the radiation transmitted to the rear face through the transparent space. In this study is limited design condition and installation condition. Accordingly follow-up researches in this part need to be conducted.