• Earthquakes and Structures
• /
• 제14권2호
• /
• pp.179-186
• /
• 2018

We present the accurate investigation the seismic behavior of the gravity retaining wall built near rock face based on numerical method. The retaining wall is a useful structure in geotechnical engineering, where the earthquake is a common phenomenon; therefore, the evaluation of the behavior of the retaining wall during an earthquake is essential. However, in all previous studies, the backfill behind the wall was usually approximated by a homogeneous region, while in contrast, in practice, in many cases retaining walls are used to support the soil pressure in, inhomogeneous, mountainous area. This suggests an accurate investigation of the problem, i.e., numerical analysis. The numerical results will be compared with some of recently proposed analytical methods to show the accuracy of the proposed method. We show that increasing the volume of the rock face yields decreasing the permanent horizontal displacement of the gravity retaining wall built near rock face. Besides, we see that the permanent horizontal displacement of the gravity retaining wall with homogenous backfill is more than permanent horizontal displacement of the gravity retaining wall case of the built near rock face in different frequency contents.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.37-40
• /
• 2007

Although masonry buildings fell into disfavour in the 1990's because of factors such ac bricklayers' high labor costs, bad reputation of poorly constructed masonry, masonry face wall is still preferred in korea as well as in other countries for its decorative value. Recently may problems with masonry face wall with opening have been reported, including cracks, deflection, swelling and even wall collapse in old masonry buildings, that mainly induced from the corrosion of connecting materials. So, it is necessary to develop the effective and uncorrosion connector. Therefore, this study aims to investigate the structural performance of masonry face walls with opening constructed by new connectors, spiral stainless anchors and to provide basic data for the field application of this method. The specimen reinforced bed joint has maximum load and displacement any other specimens.

• 대한토목학회논문집
• /
• 제31권2C호
• /
• pp.75-82
• /
• 2011

최근 콘크리트 블록을 전면판으로 주로 사용하고 있는 기존의 블록식 보강토 옹벽과는 달리 경량의 강재를 지주로 이용하여 전면판의 자중을 감소시켜 안정성을 높이고 시공이 쉬운 보강토 공법이 개발되었다. 이 연구에서는 새로 개발된 보강토 옹벽의 안정성을 확인하기 위해 실제 크기의 현장시험을 수행하여 전면판에 발생하는 수평변위, 수평토압, 그리고 옹벽의 침하량 등을 계측기를 이용하여 측정하였다. 또한, 3차원 수치해석을 수행하여 현장시험결과와 수치해석결과를 비교 분석하였다. 현장계측결과 전면판 최대수평변위는 46mm(0.009H), 최대침하량은 21.5mm로 나타나 FHWA 기준을 만족하는 것으로 나타났다. 또한 현장계측결과를 수치해석결과와 비교 분석한 결과 새로운 보강토 공법은 충분한 안정성을 확보하는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.431-434
• /
• 2005

In the past decade, various experimental programmes were undertaken to address the lack of information on the interaction between steel coupling beams and reinforced concrete shear wall in a hybrid coupled shear wall system. In this paper, the seismic performance of steel coupling beam-wall connections in a hybrid coupled shear wall system is examined through results of an experimental research programme where three 2/3-scale specimens were tested under cyclic loading. The test variables included the reinforcement details that confer a ductile behaviour on the steel coupling beam-wall connection, i.e., the face bearing plates and the horizontal ties in the panel region of steel coupling beam-wall connections. Panel shear strength reflects enhancement achieved through mobilization of the reinforced concrete panel using face bearing plates and/or horizontal ties in the panel region of steel coupling beam-wall connections.

• 한국지반공학회논문집
• /
• 제15권4호
• /
• pp.167-173
• /
• 1999

본 논문에서는 전면부 변형형태에 따른 보강토옹벽의 파괴거동을 탄소봉 모형 실험장치를 이용하여 실험적으로 연구하였다. 실험에서는 모형 보강토 벽체의 전면판 변형 형태를 상부변형, 수평변형, 하부변형 등 3종류로 나누어 실시하였다. 변형된 벽체의 파괴선을 육안으로 확인하기 위하여 사진촬영 기법을 이용하였다. 실험결과 상부변형의 조건일 경우 파괴선은 포물선의 형태를,수평이동의 조건일 경우 파괴선은 매우 큰 원호의 형태를 보였으며, 하부변형의 조건일 경우 파괴선은 직선화된 대수나선형태를 보였다. 현재 설계에 많이 사용되고 있는 복합중력식 설계법의 가상파괴선은 하부변형 조건의 파괴선과 가장 유사한 형태를 보였다.

• Wind and Structures
• /
• 제4권5호
• /
• pp.413-440
• /
• 2001

This paper presents an extensive analysis of unsteady wind loading data on a 18 m long and 2 m high wall in a rural environment, with the wind at a range of angles to the wall normal. The data is firstly analyzed using standard statistical techniques (moments of probability distributions, auto- and cross-correlations, auto- and cross-spectra etc.). The analysis is taken further using a variety of less conventional methods - conditional sampling, proper orthogonal decomposition and wavelet analysis. It is shown that, even though the geometry is simple, the nature of the unsteady flow is surprisingly complex. The fluctuating pressures on the front face of the wall are to a great extent caused by the turbulent fluctuations in the upstream flow, and reflect the oncoming flow structures. The results further suggest that there are distinct structures in the oncoming flow with a variety of scales, and that the second order quasi-steady approach can predict the pressure fluctuations quite well. The fluctuating pressures on the rear face are also influenced by the fluctuations in the oncoming turbulence, but also by unsteady fluctuations due to wake unsteadiness. These fluctuations have a greater temporal and spatial coherence than on the front face and the quasi-steady method over-predicts the extent of these fluctuations. Finally the results are used to check some assumptions made in the current UK wind loading code of practice.

• 대한치과보철학회지
• /
• 제33권1호
• /
• pp.75-84
• /
• 1995

This study was designed as a reference of vertical dimension in prosthetic treatment. The author analyzed six facial measurements, namely, (1) the height of lower face at maximum intercuspal position, (2) the height of lower face at resting position, (3) midface, (4) external ear and lateral wall of orbit, (5) interpupillary distance, (6) distance between pupil and mouth in the 100 Won-kwang Univ. Dental collage students(50 : male, 50 : female), who have normal occlusion, no posterior prosthesis, no experience of orthodontic treatment, and no deformity of facial soft tissue and no temporomandibular dysfunction. The results of this study were as follows : 1. The length of midface was shortest and the inter-pupillary distance was longest in both male and female. 2. The length difference with the length of midface and lower face at maximum intercuspal position was 5.64mm in male and 2.23mm in female, so the lower face was longer, 3. The facial measuring component, similar to lower face at maximum intercuspation, was the length of between medial wall of external ear and lateral wall of orbit. It's difference was 1.3mm in male, 1.77mm in female, and the lower face was shorter. 4. The difference of lower facial length in resting position and maximum intercuspation was 2.48mm in male, 2.24mm in female, the length of resting position was therefore longer. 5. The most clost correlation with the height of maximum intercuspal positioning lower face was resting lower face in both groups.

• 한국지반공학회지:지반
• /
• 제6권4호
• /
• pp.7-18
• /
• 1990

본 연구에서는 안정된 암 표면으로부터 가까운 거리에 강성재료로 이루어진 수직 옹벽이 설치될 때, 옹벽 뒷면에 작용하는 발생토압 문제를 다루기 위해 Spangler-Handy가 제시한 식 및 Sokol-ovskii 응력특성법을 각각 수정하였다. 수정 된 해석방법들은 옹벽 및 암 뒷면에서의 벽 마찰각의 크기 를서로구분하여 고려하였으며,됫채움 구이 비점성토인 경우에 바깥쪽으로 움직이는 옹벽의 다양 한 이동형태 및 각각의 이동단계에 관련된 정적 및 동적수평토압 계산에 이용 가능하다. 수정된 Spangler-Handy 식 및 Sokolovskii 응력특성법의 적용범위(옹벽-암 사이의 거리 b와 옹벽 높이 H의 비를 서로비교하였으며, 또한 뒷채움 흙의 내부마찰각 및 옹벽 원면의 벽마찰각이 각 해석방법의 적용범위에 미치는 영향도 분석하였다. 아울러, b/H=0.3인 경우에 수정된 Spangler-Handy 식을 토대로 얻어진 계산치를 Frydman-Keissar이 밝힌 실험 치와 비교 하였으며, 비교를 통해 하단을 중심으로 한 옹벽의 다양한 회전이동 단계에서 발생토압의 크기가 잘 일치함을 알 수 있었다. 이외에도 옹벽 뒷면의 벽마찰각 및 수평가속계수가 정적 및 동적주동토압에 미치는 영향도 검토하였으며, 뒷채움 흙의 내부마찰각 및 수평가속계수의 크기가 다양할 때 적용 가능한 설계도표도 아울러 제시되었다.

• 한국안전학회지
• /
• 제21권4호
• /
• pp.85-94
• /
• 2006

In this study, in order to evaluate the effect of two types of connector systems in reinforced retaining wall, the centrifugal tests for the conventional connector and new settlement connector system were performed. In the centrifugal tests, the aluminum plate for the face was used and the aluminum foil was used as a reinforcement. The granite soil was adopted as a fill. As a result, The settlement reinforced retaining wall reached to the failure at 80g-level. In contrast, the conventional reinforced retaining wall was collapsed at 69g-level. It means that the settlement reinforced retaining wall has the stronger stability than the conventional reinforced retaining wall. In addition, it was shown that the settlement connector system is more effective to release the stress concentration occurred at the face of reinforced retaining wall than the conventional connector system.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.230-235
• /
• 2009

In our country, the application of the design method of face to face dimension in wall-slab apartment has passed 10 years. So MC design method has fixed in the design step to some degree. In Design and Work Execution of House the exclusive area of the apartment was calculated by face to face dimension. And the term of face to face dimension was known broadly to clients, construction company, etc. But design method of face to face dimension is not to simply extend the room size so far as wall depth in design process but to ensure the actual space should be considered with efficient use and assembly of building components. That is to say, Design method of face to face dimension is not to be defined by design step but to be related with construction and maintenance. However in construction process the point of face to face design method was not understood even now. So the purpose of this study was to extract the effect and question of face to face design method in construction process by survey of actual condition of structure and construction quality, and compare this result with existing construction method. The following project of this study is to survey of actual condition of interior components such as gypsum board, windows & doors etc. Therefore this study is to induce architectural long-life through architectural standardization construction and component's exchange, and, by the subject of the study on Apartment to have design guideline and basis for joining part between Gypsumboard and windows.