• Journal of the Korean Society of Earth Science Education
• /
• v.15 no.1
• /
• pp.103-116
• /
• 2022

The purpose of this study is to investigate the perception on video material making and the effect on science teaching ability after conducting non-face-to-face teaching material making activity for elementary pre-service teachers. This activity consisted two processes. One is that elementary pre-service teachers conduct inquiry, understand related science concepts, analyze science textbooks and then make video material. The other is that they watch video materials produced by colleagues. This study was conducted on 89 elementary pre-service teachers for 8 weeks. After this activity was completed, the perception on video material making and the effect on science teaching ability of elementary pre-service teachers were investigated, and the results were analyzed. In the process of making and watching non-face-to-face teaching materials, elementary pre-service teachers showed positive results in teaching-learning, video production, and emotion and attitude toward video material making. In addition, it was found that they improved their science teaching ability through this activity and were very satisfied with this activity. However, they also mentioned several disappointments such as exclusion of learners' right to self-determination, lack of various communication channels, and errors in content of materials. This suggests that if these problems are solved, non-face-to-face classes can also be a good form of class.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.267-272
• /
• 2003

In order to investigate the effect of face material on Ti/Al alloy laminates under high velocity impact, a ballistic testing was conducted. Ballistic resistance of these materials was measured by protection ballistic limit($V_{50}$), a statistical velocity with 50% probability penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, were respectfully observed, by $V_{50}$ test and Projectile Through Plates (PTP) test at velocities greater than $V_{50}$. PTP tests were conducted with $0^{\circ}$obliquity at room temperature using 5.56mm ball projectile. $V_{50}$ tests with $0^{\circ}$obliquity were also done with projectiles that were able to achieve near or complete penetration during PTP tests. Resistance to penetration, and penetration modes which face material was Titanium alloy, were compared to those which face material was anodized Al alloy after cold-rolling.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.622-625
• /
• 2008

Purpose: In the past, laymen or beauty parlor employees commonly injected people with unproven foreign material such as paraffin, silicone, and cooking oil. We have treated a patient who injected foreign material into her face and neck. Methods: For the last 20 years, a 43-year-old woman has been injecting herself in the face and neck with foreign material. There was no tenderness, erythema, pain, ulceration, or necrosis. However many visible, touchable subcutaneous masses were found. Her face was extremely ugly and disfigured by the foreign material. We could not recognize the boundary between her neck and mandible. The occipital scalp drooped extremely. Over the past 3 years, from February 2005 to October 2007, we performed 15 operations. Results: We conducted a cephalometric facial analysis to compare preoperative and postoperative facial diameter. The patient's upper face diameter decreased from 67 cm to 60 cm, the mid face diameter from 82 cm to 59 cm, the lower face diameter from 63 cm to 50 cm, and the neck circumference diameter from 53 cm to 44 cm, respectively. The mid sagittal diameter decreased from 26 cm to 23 cm. The total excised tissue weight was 4023.7 gram after 15 operations. Conclusion: Serial excision of face and neck masses in a patient who injected herself with foreign material resulted in a satisfactory outcome.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.193-200
• /
• 1999

Since Broms and Bennermark(1967) suggested the face stability criterion based on laboratory extrusion tests and field observations, the face stability of a tunnel driven in cohesive material has been studied by several authors. And recently, more general solution for the tunnel front is given by Leca and Panet(1988). They adopted a limit state design concept to evaluate the face stability of a shallow tunnel driven into cohesionless material and showed that the calculated upper bound solution represented the actual behavior reasonably well. In this study, two factors are simultaneously considered for assessing tunnel face stability: One is the effective stress acting on the tunnel front calculated by upper bound solution; and the other is the seepage force calculated by numerical analysis under the condition of steady state ground water flow. The model tests were performed to evaluate the seepage force acting on the tunnel front and these results were compared with results of numerical analysis. Consequently, the methodology to evaluate the stability of a tunnel face including limit analysis and seepage analysis is suggested under the condition of steady state ground water flow.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.8
• /
• pp.1287-1296
• /
• 1997

The purpose of the study is to make experimental whether three-dimensional body (especially face) has illusion based on theoretical background of form dimensions and color bright among precedent multi-form illusion, using the function of computer simulation. To investigate illusion that factors of clothing design(line, color, material) effect face, as the following is tried to solve giving change to neckline, collar, scarf which is believed to influence near face. How to make experiment as follows watching in order 13 scenes of a pair of with basic design and experiment design. Then the data were subjected to analysis of variance and Duncan's multiple range test. The result of this studying as follows, 1. Face looks larger in complex neckline than simple neckline. The larger collar is the larger face looks. 2. In white jacket, illusion(the lower luminosity of scarf color gets, the brighter face brightness gets) is shown. In black jacket, also illusion(the higher luminosity of scarf color gets, the darker face brightness gets) is shown. 3. In experiment on hardness and softness of face impression according to the material of collar, collar of knit and fur gives us assimilation illusion bring softer impression of face.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.7
• /
• pp.19-27
• /
• 2021

In this paper, we propose a method for detecting characters in images and detecting facial regions, which consists of two tasks. First, we separate two different characters to detect the face position of the characters in the frame. For fast detection, we use You Only Look Once (YOLO), which finds faces in the image in real time, to extract the location of the face and mark them as object detection boxes. Second, we present three image processing methods to detect accurate face area based on object detection boxes. Each method uses HSV values extracted from the region estimated by the detection figure to detect the face region of the characters, and changes the size and shape of the detection figure to compare the accuracy of each method. Each face detection method is compared and analyzed with comparative data and image processing data for reliability verification. As a result, we achieved the highest accuracy of 87% when using the split rectangular method among circular, rectangular, and split rectangular methods.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.39-39
• /
• 2010

The authors have an extensive study of photoluminescences for Zn-polar and O-polar faces of single-crystalline ZnO bulks. In the photoluminescence (PL) spectra at 10 K, Zn-polar and O-polar faces show a common emission feature: neutral donor-bound excitons and their longitudinal-optical (LO) phonon replicas are strong, and free excitons are very weak. However, in the PL spectra at room temperature (RT), Zn-polar and O-polar faces show extremely different emission characteristics: the emission intensity of Zn-polar face is 30 times larger than that of O-polar face, and the band edge of Zn-polar face is 33 meV red-shifted from that of O-polar face. The temperature dependence of photoluminescence indicates that the PL spectra at RT are closely associated with free excitons and their phonon-assisted annihilation processes. As a result, it is found that the RT PL spectra of Zn-polar face is dominated by the first-order LO phonon replica of A free excitons, while that of O-polar face is determined by A free excitons. This is ascribed that Zn-polar face has larger exciton-phonon coupling strength than O-polar face.

• Geomechanics and Engineering
• /
• v.20 no.5
• /
• pp.447-459
• /
• 2020

Based on the literature statistical method, the paper publication status of the isolated working face and the distribution of the rockburst coal mine were obtained. The numerical simulation method is used to study the stress distribution law of working face under different mining range. In addition, based on the similar material simulation test, the overlying strata failure modes and the deformation characteristics of coal pillars during the mining process of the isolated working face with thick-hard key strata are analyzed. The research shows that, under the influence of the key strata, the overlying strata formation above the isolated working face is a long arm T-type spatial structure. With the mining of the isolated working face, a series of damages occur in the coal pillars, causing the key strata to break and inducing the rockburst occurs. Combined with the mechanism of rockburst induced by the dynamic and static combined load, the source of dynamic and static load on the isolated working face is analyzed, and the rockburst monitoring methods and the prevention and control measures are proposed. Through the above research, the occurrence probability of rockburst can be effectively reduced, which is of great significance for the safe mining of deep coal mines.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.230-235
• /
• 2009

In our country, the application of the design method of face to face dimension in wall-slab apartment has passed 10 years. So MC design method has fixed in the design step to some degree. In Design and Work Execution of House the exclusive area of the apartment was calculated by face to face dimension. And the term of face to face dimension was known broadly to clients, construction company, etc. But design method of face to face dimension is not to simply extend the room size so far as wall depth in design process but to ensure the actual space should be considered with efficient use and assembly of building components. That is to say, Design method of face to face dimension is not to be defined by design step but to be related with construction and maintenance. However in construction process the point of face to face design method was not understood even now. So the purpose of this study was to extract the effect and question of face to face design method in construction process by survey of actual condition of structure and construction quality, and compare this result with existing construction method. The following project of this study is to survey of actual condition of interior components such as gypsum board, windows & doors etc. Therefore this study is to induce architectural long-life through architectural standardization construction and component's exchange, and, by the subject of the study on Apartment to have design guideline and basis for joining part between Gypsumboard and windows.

• Journal of the Korean housing association
• /
• v.20 no.4
• /
• pp.31-38
• /
• 2009

In our country, the application of the design method of face to face dimension in wall-slab apartment has passed 10 years. So MC(Modular Coordination) design method has fixed in the design step to some degree. In Design and Work Execution of House the exclusive area of the apartment was calculated by face to face dimension. And the term of face to face dimension was known broadly to clients, construction company, etc. But design method of face to face dimension is not to simply extend the room size so far as wall depth in design process but to ensure the actual space should be considered with efficient use and assembly of building components. That is to say, Design method of face to face dimension is not to be defined by design step but to be related with construction and maintenance. However in construction process the point of face to face design method was not understood even now. So the purpose of this study was to extract the effect and question of face to face design method in construction process by survey of actual condition of structure and construction quality, and compare this result with existing construction method. The following project of this study is to survey of actual condition of interior components such as gypsum board, windows & doors etc. Therefore this study is to induce architectural long-life through architectural standardization construction and component's exchange, and, by the subject of the study on Apartment to have design guideline and basis for joining part between Gypsumboard and windows.