• Title/Summary/Keyword: Face Type

Search Result 1,049, Processing Time 0.023 seconds

A Study on the Application Effect of Central-Grid PV System at a Streetlamp using RETScreen - A Case Study of Gwangjin-gu - (RETScreen을 이용한 가로등의 계통연계형 태양광시스템 적용 효과 분석 - 서울시 광진구를 중심으로 -)

  • Kang, Seongmin;Choi, Bong-Seok;Kim, Seungjin;Mun, Hyo-dong;Lee, Jeongwoo;Park, Nyun-Bae;Jeon, Eui-Chan
    • Journal of Climate Change Research
    • /
    • v.5 no.1
    • /
    • pp.1-12
    • /
    • 2014
  • With continued economic growth, Korea has seen an increase in the nighttime activities of its citizens as hours of activity have extended into night. There is an increasing trend in energy consumption related to citizens' nighttime activities. In order to analyze ideas for an efficient replacement of the power consumption of streetlights and for profit generation by applying grid-type solar systems, this study used an RETScreen model. Through energy analysis and cost analysis, the application benefit and viability of grid-type solar street light systems were analyzed. With analysis result of a total weekly power generation of 114 kWh via a grid-connected solar streetlight system, it was shown that the net present value of a grid-connected solar street light system is 155,362 KRW, which would mean a payback period of about 5.2 years, and as such, it was shown that profit could be generated after about 6 years. In addition, if the grid-connected solar power generation system proposed by this study is to be applied, it was shown that 401,935 KRW in profit could be generated after the 20-year useful life set for the solar system. In addition, the sensitivity analysis was performed taking into account the price fluctuations of SMP, maintenance. As a result, a payback period has increased by 1~2 years, and there were no significant differences. Because the most important factor that affect the economic analysis is the cost of supply certification of renewable energy, a stable sales and acquisition of this certification are very important. the Seoul-type Feed in Tariff(FIT) connected to other institutions will enable steady sales by confirming to purchase the certification for 12 years. Therefore, if those issues mentioned above are properly reflected, Central-grid PV system project will be able to perform well in the face of unfavorable condition of solar PV installation.

Surrogate Internet Shopping Malls: The Effects of Consumers' Perceived Risk and Product Evaluations on Country-of-Buying-Origin Image (망상대구점(网上代购店): 소비자감지풍험화산품평개대원산국형상적영향(消费者感知风险和产品评价对原产国形象的影响))

  • Lee, Hyun-Joung;Shin, So-Hyoun;Kim, Sang-Uk
    • Journal of Global Scholars of Marketing Science
    • /
    • v.20 no.2
    • /
    • pp.208-218
    • /
    • 2010
  • Internet has grown fast and become one of the most important retail channels now. Various types of Internet retailers, hereafter etailers, have been introduced so far and as one type of Internet shopping mall, 'surrogate Internet shopping mall' has been prosperous and attracting consumers in the domestic market. Surrogate Internet shopping mall is a unique type of etailer that globally purchases well-known brand goods that are not imported in the market, completes delivery in the favor of individual buyers, and collects fees for these specific services. The consumers, who are usually interested in purchasing high-end and unique but not eligible brands, have difficulties to purchase these items overseas directly from the retailers or brands in other countries due to worries of payment failure and no address available for their usually domestic only delivery. In Korea, both numbers of surrogate Internet shopping malls and the magnitude of sales have been growing rapidly up to more than 430 active malls and 500 billion Korean won in 2008 since the population of consumers who want this agent shopping service is also expending. This etail business concept is originated from 'surrogate-mediated purchase' and this type of shopping agent has existed in many different forms and also in wide ranges of context level for quite a long time. As marketers face their individual buyers' representatives instead of a direct contact with them in many occasions, the impact of surrogate shoppers on consumer's decision making has been enormously important and many scholars have explored various range of agent's impact on consumer's purchase decisions in marketing and psychology field. However, not much rigorous research in the Internet commerce has been conveyed yet. Moreover, since as one of the shopping agent surrogate Internet shopping malls specifically connect overseas brands or retailers to domestic consumers, one specific character of the mall's, image of surrogate buying country, where surrogate purchases are conducted in, may play an important role to form consumers' attitude and purchase intention toward products. Furthermore it also possibly affects various dimensions of perceived risk in consumer's information processing. However, though tremendous researches have been carried exploring the effects of diverse dimensions of country of origin, related studies in Internet context has been rarely executed. There have been some studies that prove the positive impact of country of origin on consumer's evaluations as one of information clues in product manufacture descriptions, yet studies detecting the relationship between country image of surrogate buying origin and product evaluations rarely undertaken regarding this specific mall type. Thus, the authors have found it well-worth investigating in this specific retail channel and explored systematic relationships among focal constructs and elaborated their different paths. The authors have proven that country image of surrogate buying origin in the mall, where surrogate malls purchase products in and brings them from for buyers, not only has a positive effect on consumers' product evaluations including attitude and purchase intention but also has a negative effect on all three dimensions of perceived risk: product-related risk, shipping-related risk, and post-purchase risk. Specifically among all the perceived risk, product-related risk which is arisen from high uncertainty of product performance is most affected (${\beta}$= -.30) by negative country image of surrogate buying origin, and also shipping-related risk (${\beta}$= -.18) and post-purchase risk (${\beta}$= -.15) get influenced in order. Its direct effects on product attitude (${\beta}$= .10) and purchase intention (${\beta}$= .14) are also secured. Each of perceived risk dimension is proven to have a negative effect on purchase intention through product attitude as a mediator (${\beta}$= -.57: product-related risk ${\rightarrow}$ product attitude; ${\beta}$= -.24: shipping-related risk ${\rightarrow}$ product attitude; ${\beta}$= -.44: post-purchase risk ${\rightarrow}$ product attitude) as well. From the additional analysis, the paths of consumers' information processing are shown to be different based on their levels of product knowledge. While novice consumers with low level of knowledge consider only perceived risk important, expert consumers with high level of knowledge take both the country image, where surrogate services are conducted in, and perceived risk seriously to build their attitudes and formulate decisions toward products more delicately and systematically, which is in line with previous studies. This study suggests several pieces of academic and practical advice. Precisely, country image of surrogate buying origin does affect on consumer's risk perceptions and behavioral consequences. Therefore a careful selection of surrogate buying origin is recommended. Furthermore, reducing consumers' risk level is required to blossom this new type of retail business whether its consumer are novices or experts. Additionally, since consumer take different paths of elaborating information based on their knowledge levels, sophisticated marketing approaches to each group of consumers are required. For novice buyers strong devices for risk mitigation are needed to induce them to form better attitudes and for experts selections of better and advanced countries as surrogate buying origins are advised while endorsement strategy for the site might work as a reliable information clue to all consumers to mitigate the barriers to purchase goods online. The authors have also explained that the study suffers from some limitations, including generalizability. In future studies, tests of and comparisons among different types of etailers with relevant constructs are recommended to broaden the findings.

Differences in Body Temperatures according to Three Methods of cold Application (냉적용 방법에 따른 심부 및 피부온도변화)

  • 임난영;김진경
    • Journal of Korean Academy of Nursing
    • /
    • v.23 no.2
    • /
    • pp.157-169
    • /
    • 1993
  • The most effective modality for cold application and the length of the application have not been determined despite many studies about the use of cold. A quasi-experimental study was conducted to examine the most effective modality among three methods of cold application, the most effective length of time for the application and the continuing effect after each type of cold application. Thirty adult patients admitted to medical and neurosurgical unit and with high fever (above 38.2 ℃) were assigned randomly to each of three cold ap-plication methods : (a) ice bag: (b) cold compress; and (c) tepid water sponge bath. Each method was applied to the whole anterior surface except the face and neck with the patient in the supine pos-ition. Rectal temperatures and skin temperatures (mid chest, upper arm, thigh and leg) were measured be-fore each application and every 10 minutes during ,each application for a period of 60 minutes. They were also measured every 10 minutes for 30 minutes after each cold application was finished. The experiments were carried out from Dec. 22. 1992 through Feb. 26, 1993. The data were analysed using means, ANCOVA Sheffe test and Pearson's Correlation Coefficient. The results of this study are as follows : 1. There were no significant differences among the three cold application methods in the reduction of body temperature, 2. Among the ice bag, cold compress and tepid water sponge bath groups, the ice bag proved to be the most effective method for lowering skin temperature while the cold compress was least effective. 3. Both rectal and skin temperature continued to decrease during the 60 minutes of cold application, but the hunting phenomena was not observed at any of the cold application sites. 4. There were no significant correlations between mean rectal and skin temperatures. 5. Skin temperatures according to the cold application sites decreased to a range of 3.46℃ to 5.20℃ (mid chest), a range of 4.48℃ 4.96℃ (upper arm), a range of 3.86℃ to 5.05℃ (thigh), and a range of 5.42℃ -7.12℃ (leg ). 6. In continuing effect after the cold applications were finished, rectal temperatures according to ice bag, cold compress and tepid sponge bath decreased to 0.29℃, 0.23℃ and 0.09℃ respectively, while the mean skin temperatures increased to 2.39℃ , 2.04℃ and 2.22℃ respectively. In this experiment the ice bag was the most effective modality for lowering skin temperature. when-ever cold is applied for systemic effect, the continuing effect of cold should be considered. The determination of the most effective length of time for cold application needs further study.

  • PDF

A Proposal of Educational 3D Modelling Software Development Type Via User Experience Analysis of Open Source 3D Modelling Software (무료공개 3D모델링 소프트웨어 사용자 경험 분석을 통한 교육용 3D모델링 소프트웨어 개발유형 제안)

  • Lee, Guk-Hee;Cho, Jaekyung
    • Science of Emotion and Sensibility
    • /
    • v.20 no.2
    • /
    • pp.87-102
    • /
    • 2017
  • With increasing interest in 3D printing, the interest in the 3D modelling training that should precede the 3D printing is increasing. However, the existing 3D modelling software is developed mostly by foreign brands. Thus, the interfaces are all in English. 3D modelling software training for Korean novices who are not familiar with these terms has constraints. This study aims to explore what to consider when developing a Korean model for 3D modelling educational software for 3D printing in the face of such reality. For this goal, after having novices with no experience in 3D modeling to perform a house building task using either 12D Design or Tinker CAD, we conducted a survey. It was found in the result that more users favored Tinker CAD over 123D Design, and the errors involved while working with the Tinker CAD were less than those with the 123D Design, and the ratio of people who completed the task with the Tinker CAD was higher than that with the 123D Design. In general discussion, an introductory level educational 3D modeling software development is proposed which utilize characteristics of Tinker CAD (easy modelling is possible by three-dimensional figures) and web-based method. Also, a beginner/intermediate level educational 3D modeling software development is proposed which utilize characteristics of 123D Design (with finer measurement manipulations and figure alignment) and Windows-based method.

Analysis on the TBM Penetration Rates in Extremely Hard Rocks (극경암에서의 전단면터널 굴착속도 분석연구)

  • Park, Chul-Whan;Synn, Joong-Ho;park, Chan;Kim, Min-Kyu;Chung, So-Keul;Kim, Hwa-Soo
    • Tunnel and Underground Space
    • /
    • v.10 no.4
    • /
    • pp.526-532
    • /
    • 2000
  • The uniaxial compressive strength of rock mass is known as the major factor in the assessment of drillability and the optimum excavation design in full-face tunnel excavation by TBM. Referring to worldwide cases, TBM has been applied mostly to the rock mass within the strength range of 80~250 MPa. Recently, a water way tunnel has been constructed as a part of Milyang dam project by TBM within the rock masses where the rock type is mainly granite with some granophyre, hornfels and andesite. Their uniaxial compressive strengths in extended area are estimated higher than 260 MPa. In this paper, the relation between the penetration rate and the rock mass properties is analyzed and TBM application to the very hard rocks is discussed. As a result that three suggestions to predict the TBM net penetration rate are analyzed, NTH method seems a better approach than other methods in the extremely hard rocks. NTH prediction matches with the results of actual values with the variations of 2~20%. Hardness measurement by Schmidt hammer and RMR estimation are carried out along the L = 5.3 km entire TBM tunnel alignment. The net penetration rate measured monthly is shown to be reciprocally proportional to Schmidt rebound hardness and RMR where coefficients of correlation, $R^2$are 0.705 and 0.777 respectively. As a result, they are good quantitative indices for the prediction of TBM net penetration rate in the extremely hard rocks. Magnitude of in-situ stress has a certain effect on TBM performance, and it is required to measure the in-situ stresses in TBM excavation design.

  • PDF

Reliability Evaluation of Rubber Wheel and Steel Wheel for Wheel Tracking Test of Bituminous Concretes (역청 콘크리트 반복주행시험에서 고무바퀴와 강재바퀴의 신뢰성 비교 연구)

  • Hong, Joon-Pyo;Doh, Young-Soo;Kim, Kwang-Woo
    • International Journal of Highway Engineering
    • /
    • v.7 no.2 s.24
    • /
    • pp.97-107
    • /
    • 2005
  • Since the purpose of wheel tracking test is to find out relative difference of mixture's rut resistance, the wheel is an important part in the test for obtaining a consistent output. This study is performed to examine efficiency of different wheel material, rubber and steel in wheel tracking test. The rubber was inserted as a ring on the outer face of the steel wheel, and thickness of rubber ring was 15mm and 7.5mm and 0mm (steel wheel without rubber), making the total outer diameter 200mm. The objective of this study was to select reliable wheel material type in wheel tracking test at $60^{\circ}C$ based on variance in output (rut depth and dynamic stability) and correlation with SD (deformation strength). The result of regression analysis of rut depth with Sd showed that $R^2$ values of wheel rubber thickness of 15mm, 7.5mm and 0mm were 0.7, 0.8 and over 0.9, respectively. In a case of steel wheel (0mm), the highest $R^2$ value was 0.9569. Therefore, the wheel without rubber ring was the best in output consistency level and coefficient of determination $(R^2)$ with deformation strength. Therefore, the steel wheel without rubber ring is suggested as the best choice for wheel tracking test of asphalt concrete.

  • PDF

Evaluation of Commercially Available Passive Samplers and Development of New Passive Samplers Part 2 : Development of New Passive Samplers (공기중 유기용제 농도 측정에 있어서 수동식 시료채취기의 성능평가 및 한국산 수동식 시료채취기의 개발에 관한 연구 제 2 부 : 한국산 수동식 시료채취기의 개발)

  • Paik, Nam Won;Kong, Sang Hui;Park, Jeong Im;Lee, Young Hwan
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.6 no.1
    • /
    • pp.97-108
    • /
    • 1996
  • A new type of passive samplers were designed and produced by authors. After evaluating the quality of activated carbon by measuring recovery rate of organic vapors and steadiness of sampling rate, activated carbon with 30 - 35 mesh produced by Company S in Korea was selected. In each passive sampler, an amount of 400 mg of the activated carbon was filled in 25-mm cassette and covered by fixed screen (or wire screen with 100 mesh). In addition to the fixed screen, a wind screen (or wire screen with 300 mesh) was also attached at outer face. The sampling rate of the new Korean passive samplers was estimated Conclusions obtained in the study are as follows. 1. Sampling rates of the newly developed Korean passive samplers were affected by sampling time. For n-hexane, sampling rates of 15- and 60-minute samples were 70.92 and 37.45 ml/min, respectively. Sampling rate of both 200- and 450-minute samples was 25.96 ml/min. It is concluded that, when passive samplers are used for measuring organic vapors, samples be collected longer than 60 minutes. 2. Sampling rate of the passive samplers was also affected by airborne concentration of organic vapors. Lower sampling rates were determined at level of 1/2 threshold limit values (TLVs) recommended by the American Conference of Governmental Industrial Hygienists (ACGIH). It is recommended that sampling rate of the passive samplers be obtained at site by measuring concentrations using both the NIOSH Method and passive samplers simultaneously. 3. When the passive samplers, which collected organic vapors, were exposed to clean air for five hours, there was no significant loss of organic vapors due to reverse diffusion. 4. When samples were stored at room temperature ($21.8{\pm}0.7^{\circ}C$) and refrigerator ($3.8{\pm}0.7^{\circ}C$), there was no significant difference in the accuracy of results. For trichloroethylene and n-hexane, accuracies were within 25 % at both temperatures until seven days. However, poor accuracy exceeding 25 % was indicated in toluene from the first day. It is recommended that samples be stored at freezing temperature below $0^{\circ}C$. 5. Sampling efficiency was significantly affected by direction of the passive samplers. Results of samplers facing wind and down, respectively, were compared. Lower amount of organic vapors were collected when the sampler was oriented down. It is recommended that, when air velocity is low in plants, the passive samplers be oriented to the wind. However, when air velocity is high, the passive samplers be oriented down.

  • PDF

A Study on the Establishment & Functional Characteristics of Health Facilities for the Aged in Japan

  • Kim, Tae Il;Yoshida, Tomo Hiko
    • Architectural research
    • /
    • v.8 no.1
    • /
    • pp.1-7
    • /
    • 2006
  • Various housing measures are needed for the rapidly aging society of Korea. In particular, the welfare policy for the elderly has changed towards the community care. Taking this fact into consideration, it is necessary to have the establishment of a system that offers the elderly appropriate welfare services at their appropriate residence (ageing in place) for the effectiveness of the community care. In this aspect, there are a number of implications to Korea to study merits and demerits of the Health Facilities for the Aged (HFA) in Japan. The society of Japan has been rapidly aging since 1970, and Korea is to face the same situation. As for the data of this study, a total of 2,393 facilities (as of November 1999) mentioned in the annual report of the Japanese Ministry of Health, Labor and Welfare were classified based on types of their establishment: (1) free-standing structures (603 facilities); (2) annexes to hospitals (981 facilities); (3) annexes to welfare facilities (511 facilities); and (4) annexes to clinics (298 facilities). Next, 239 facilities were selected through taking a sample of 10 percent from each type of the HFA mentioned above. This was done through the random sampling method with the computer program of MS EXCEL. The Implications of the results of analyses are as follows. First, most of the health facilities were planned with the scale that was larger than the scale of standard special nursing homes in terms of the total floor area. Precise equations that were to obtain precise results of the scale of the HFA and the appropriate number of residents were obtained through the method of the regression analysis. Korea and Japan have similarities in terms of culture, society and family relations; however, the two countries also have differences in terms of the application of laws on the establishment of houses, hospitals, and welfare facilities. As for planning the scale of the HFA, the realities of Korea should be considered. Second, as for the functional aspect of the HFA with a condition of returning home, the place before and after the HFA showed the pattern of 'from a residential place to a residential place' and 'from a hospital to a hospital.' This reveals a close correlation with the types of the HFAs and operational ways of the facilities. Its cause is considered to be the aspect of the operation and management of the HFA rather than the aspect of its function of providing services in association with medical and health facilities. Therefore, when intermediate welfare facilities are considered in Korea, it is strongly advised to consider the problem of annexes to other facilities and efficiency of sharing of the facilities in terms of its operation and management.

A Study on Development of Drying Method of Paddy Rice in Sack (포대단위 곡물건조방법의 개발에 관한 연구)

  • 서상룡;최재갑
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.17 no.4
    • /
    • pp.3980-3990
    • /
    • 1975
  • This study was carried out to develop a method of grain drying ststem that can be done by forcing the heated-air directly into the grains within the sack. The air duct was pushed into the central position of the grain-deposited sack and the heated-air was forced to flow in the radial direction. The system is referred here as the unit sack drying system. At a first step of this study, an air flow resistance tester was constructed to measure the resistance of air flow to grains in cooperated with some different sack materials, the sack materials, the tested were rice-straw bag, sack of polyethylene film, and jute sack In addition, unit sack drying system was constructed to investigate the drying characteristics of the dryer. on this dryer, two kind of terminal air ducts were attached and tested to examine its effects on uniform drying, and also, aseries of drying test was performed to trace the effect of increasing air flow rate on uniform drying. The results are as follows: 1) Resistance of air flow for each sack material was increased almost proportional to the increasing rate of air flow. Experimental data showed little significant differences of the air flow resistance among the materials. 2) From the comparison with air flow resistance of sack material and that of roughrice, it was indicated that airflow resistance of sack material was much higher than that of rice rough Therefore, in the unit sack drying sysle in which air flow is destined to face the sach material after leaving the grain, it was suggested that air flow would be inuniform to each part of grain within sack because of much higher air flow resistance of sack material than that of grain, and the fact would results inuniform grain drying. 3) Drying test on the unit sack drying system in cooperated with different type of terminal air ducts showed that high speed air is better for uniform drying than in high pressure. with the drying system which was assembled with the air ducts delivering higher speed air, there also involved a problem of significant inuniform drying. Therefore, any means to improve the inuniform drying should be undertaken for practical use. 4) A series of drying test with in creasing air flow rate resulted that increasing air flow rate in the unitsack drying system gave little effect on uniform drying, therefore, it is recommened to change its drying system for drying grain uniformly.

  • PDF

A Study on the Unmanned convenience Store Operation System from the Viewpoint of Visual Merchandising (비주얼 머천다이징 관점에서의 무인 편의점 운영시스템에 관한 연구)

  • Seo, Jung-Hwa;Yang, Hoe-Chang;Park, Chul-Ju;Youn, Myoung-Kil
    • The Journal of Industrial Distribution & Business
    • /
    • v.9 no.12
    • /
    • pp.45-53
    • /
    • 2018
  • Purpose - The purpose of the study was to investigate operation system of current convenience store and competing retail store and to find out development of unattended convenience store. Operators can save labor cost and solve labor seeking when opening shop under suitable environment and commerce area, and assure of employee's safety. Customers are allowed to select commodity comfortably without disclosure of face and to shorten standby time at simple store opening, buying and paying and to produce convenient living environment by financing, delivery and goods control. This study examined effect and problems of operation of existing and unattended convenience store from point of view of visual merchandising to find out model of unattended convenience store and to strengthen competitiveness of convenience store business. Research design, data, and methodology - Research procedure of accomplishment of goal of the study was: The study investigated state of distribution business, and role and definition of VMD. First, VMD played an important role of promotion and competitiveness of unattended convenience stores. Second, the author investigated research and cases of unattended convenience stores 14 months, that is to say, from August 15, 2017 to October 15, 2018. Third, the author investigated on-the-spot three of common convenience stores, three of unattended convenience stores and three of retailers one month, that is to say, June 1, 2018 to July 1, 2018. The subject was convenience stores and retailers selling similar type of products at Seoul and metropolitan area. Results - Layout, selling place, brand identity, goods assortment, authentication system, product information cognition and control, buying and payment system, security system, salesmen, promotion and other services should be improved from point of view of merchandising. Structure, furniture, lighting, voice, façade, VP, PP, IP and POP should be developed. Conclusions - Unattended convenience stores saved operating cost and lessened labor and gave visitors convenience and comfortable shopping and made use of resources effectively. Further studies with quantitative analysis shall find out strategic conditions for promotion of unattended convenience stores.