• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1219-1224
• /
• 2004

The objective of this study is to propose an experimental calibration facility in which a heat flux sensor can be calibrated under conductive condition by using helium gas. The heat flux calibration facility was designed, simulated and manufactured for use in a high heat transfer condition. It delivers heat fluxes up to a maximum of 35 KW $m^{-2}$. A copper block heated electrically with 3.5 KW power is designed to produce uniform temperature up to 600 K across its face. High heat fluxes are provided between hot plate and cold plate by 1 mm height helium filled gap. A cold plate is maintained around 300 K through pool boiling using a refrigerant and water-cooled heat exchanger. A simulation was conducted to verify the design of the main test section. To verify the performance of calibration facility, a heat flux sensor was examined. The measured heat fluxes were compared to the calculated one.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.787-792
• /
• 2002

The voided slab have many advantages, light weight, high load-distribution capacity, low cost and beautiful appearance, etc. But they have also many cracks due to difficulties in designs and construction, analysis, shrinkage, installation and rising force of voided tube. This paper presents the retrofit effects with steel plate(SP)/carbon fiber sheet(CFS) of RC voided slab. As a results of this study, it proved that the strip pattern has to be profitable than full-face pattern in performance such as crack, ultimate loads, stiffness. Retrofit length has many influence on retrofit effects, as the length increases, performance and stability of end blocks higher. Also, it proved that the retrofit on full-section has to be profitable than voided-section in performance, and the overlay length of CFS is desirable to extent approximately and welding(V-cut) has to be efficient than anchors in SP connection. But the kinds of end block and anchor has not influence on retrofit effects.

• Tribology and Lubricants
• /
• v.29 no.1
• /
• pp.7-12
• /
• 2013

Turbine power control devices at a nuclear / thermoelectric power plant lead to failure by creating mechanical shocks and strong vibrations that are due to the strong elasticity of a spring and the inertia of the valve face during its rapid movement to block steam. To ensure durability of the turbine power control device, which is the main component in the power plant, it is necessary to develop a device that can prevent such vibrations. In this study, a cushion mechanism is added to the head of the hydraulic servo actuator, which is a turbine power control device. Moreover, the cushion mechanism, which includes various modifies shapes and orifices is investigated dynamically through modeling and simulations.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.249-261
• /
• 1997

A basic study on the lifting lug design has performed through the rational and systematic process. In order to evaluate the proper design-load distribution around lug eye investigation of contact force between lifting lug and shackle pin is performed using non-linear parametric analysis idealized by gap element models. Gap element modeling and nonlinear analysis procedures are illustrated and discussed based on MSC/NASTRAN. Some analysis and design guides are suggested through the consideration of several important effects such as stress distribution pattern, circumferential contact force distribution along the lug eye face, loading share rate between lug main plate and doubler, effect of loading direction, relation between applied force and deflection and size effect of shackle pin radius. Additionally optimum design studies are performed and general trends according to the variation of design parameters are suggested.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.114-116
• /
• 2006

This paper is to propose the palm print recognition system using wavelet transform. The palm print is frequently used as the material for the biometric recognition system such as the finger print, iris, face, etc. Since the palm print has lots of properties which include principle line, wrinkles, ridge and so forth, the ways of the implementation of the system are various. In this paper, at first, the palm print image is acquired and then some level of wavelet transform is performed. The coefficients become to be some blocks size of M by N after divided into the horizontal, vertical, diagonal components each level. The mean values, which are calculated with values of each block, are used as the feature vector. To compare between the stored template and the acquired vectors, we adopt the PNN (Probability Neural Network) method.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.04a
• /
• pp.149-156
• /
• 1998

In suspension bridges, the axial farces in the wires are transferred by side pressure on the semicircular face, and further from the strand shoe through rods to a base plate fixed to the massive concrete part of the anchor block. For prefabricated strands the most common way of anchoring is by socketing the ends of the strands. In this study, strand shoe and hanger socket are analyzed far various load conditions using Finite Element Method. The finite element models are built using MSC/PATRAN and analysis is carried out using MSC/NASTRAN. Results are again completely processed using MSC/PATRAN. From the results of the analysis, trends of deformation and stress distribution are reviewed and important factors to consider in the design of strand shoe and hanger socket are discussed.

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.123-128
• /
• 2001

Numerical simulation is conducted to clarify the heat transfer and fluid flow characteristics of brake shoe for freight car. High order up-wind scheme for governing equations, k-epsilon turbulent model and SIMPLEC algorithm based on finite volume method are used to solve the physical shoe model. The governing equations are solved by TDMA(Tri-Diagonal Matrix Algorithm) with line-by-line method and block correction. From the results of simulation, the characteristics of cooling pattern is strongly affected by the velocity of train and the material of shoe. The face lift of shoe affects on the temperature distribution of rear surface of shoe as well as the front surface of that. Due to the grooves in shoe, it will be expected to cool the frictional heat and result in the reduction of maintenance efforts.

• Journal of Surface Science and Engineering
• /
• v.37 no.1
• /
• pp.22-27
• /
• 2004

Copper electroforming process has been applied to duplicate Koryo Tripitaka (Taejang'kyong), wooden printing block. Thin copper replica printing plates of 1 mm thickness was successfully manufactured from the printing face (54.5${\times}$25.5 cm) of wooden printing plate. Major processes are (1) silicon rubber replication of the master (2) silvering on silicon rubber (3) copper electroforming (4) separation of copper from the silicon mandrel (5) final coloring by brass plating and trimming. This process has various Potential applications in making thin metallic objects such as plaques, statues, bust and hollow metal objects for jewelry.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.11a
• /
• pp.911-914
• /
• 2004

본 논문에서는 주어진 영상으로부터 보다 빠르고 효율적인 의미정보 추출을 위하여 블록분할 및 영역구성에 의한 기본영역 및 확장영역을 제안하며, 각 영역들을 구성하는 블록들의 구성관계에 의한 블록탐색 기법도 제안하고 있다. 기본영역은 영상의 중심을 기반으로 구성되는 중심영역과 이웃영역으로 구성되며, 확장영역은 기본영역들의 결합에 의해 생성된다. 블록탐색은 영역을 구성하는 블록간의 구성관계를 기반으로 블록들이 가질 수 있는 특징들의 유사도와 영역정보에 따라 탐색할 수 있는 방법이다. 얼굴추출은 분할된 블록들로부터 피부색상 존재여부를 판별하여 피부색이 존재하는 블록들로부터 얼굴 후보영역들을 획득한 후, 추출된 후보영역들로부터 얼굴을 구성하는 지역적 특성을 비교평가하여 얼굴을 추출할 수 있다. 또한 추출된 얼굴 영역정보는 연속적인 영상이 주어졌을 때, 해당영역들의 블록들에 대한 정합을 통하여 이동경로와 얼굴영역을 탐색할 수 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.11a
• /
• pp.587-590
• /
• 2004

본 논문에서는 고정점 알고리즘의 독립성분분석을 이용한 얼굴인식을 제안하였다. 여기서 고정점 알고리즘은 뉴우턴법에 기초한 것으로 빠른 인식을 위함이고, 독립성분분석의 이용은 통계적으로 독립인 기저영상을 효과적으로 추출하기 위함이다. 제안된 기법을 Yale 얼굴영상 데이터베이스로부터 선택된 20개의 $320{\ast}243$ 픽셀의 영상을 대상으로 시뮬레이션한 결과, 주요성분의 개수에 따른 압축성능과 city-block, Euclidian, 그리고 negative angie의 거리척도에 따른 분류에서 우수한 인식성능이 있음을 확인할 수 있었다.