• 한국항공우주학회지
• /
• 제30권1호
• /
• pp.44-48
• /
• 2002

본 논문에서는 단일 광섬유 FBG/EFPI 복합 센서를 이용하여 변형률, 온도, 그리고 진동으 세 가지 물리량을 동시에 측정하는 방법에 대해 설명하였다. 변형률과 온도를 측정하기 위한 FBG/EFPI 센서 시스템과 진동을 감지하기 위한 EFPI 센서 시스템을 wavelength division multiplexer를 이용하여 하나의 시스템으로 결합하였다. FBG/EFPI 센서 시스템의 광원은 파장 이동 광섬유 레이저(WSFL)이며 EFPI 센서 시스템의 광원은 단파장 레이저 다이오드이다. 구성된 시스템을 이용하여 열챔버에서 알루미늄 보의 열변형률, 온도, 그리고 진동의 동시 측정을 수행하여 본 시스템의 유효성을 확인하였다.

• 한국공작기계학회논문집
• /
• 제14권4호
• /
• pp.49-54
• /
• 2005

Measuring defects on the inside and on the surface of a steel structure is very important technology in order to predict the life span of the structure. In particular, a place with a high probability that it may contain defects is a welded part and it is very important to check defects in the part, absence/presence of non-uniform substances, its shape, and the location. Many non-destructive tests can be applied, but the ultrasonic flow detection test is widely used with some advantages. The ultrasonic flow detection test, however, cannot be applied when there is a problem by a contact medium between PZT and a specimen, in case of a small and complicated shape or a moving object or when the specimen is hot. In this study, to solve the problems of the contact ultrasonic flow detection test, the non-contact ultrasonic flow detection test for sending/receiving ultrasonic waves using lasers was described. I intended to develop a non-destructive detection system applying the laser application ultrasonic test to a steel structure by detecting the defects inside of and on the surface of the specimen.

• Current Optics and Photonics
• /
• 제4권1호
• /
• pp.69-80
• /
• 2020

A Rayleigh Lidar used for wind detection works by transmitting laser pulses to the atmosphere and receiving backscattering signals from molecules. Because of the weak backscattering signals, a lidar usually uses a high sensitivity photomultiplier as detector and photon counting technology for signal collection. The capturing of returned extremely weak backscattering signals requires the lidar to work on dark background with a long time accumulation to get high signal-to-noise ratio (SNR). Because of the strong solar background during the day, the SNR of lidar during daytime is much lower than that during nighttime, the altitude and accuracy of detection are also restricted greatly. Therefore this article describes an ultra-narrow bandwidth filter (UNBF) that has been developed on 354.7 nm wavelength of laser. The UNBF is used for suppressing the strong solar background that degrades the performance of Rayleigh wind lidar during daytime. The optical structure of UNBF consists of an interference filter (IF), a low resolution Fabry-Perot interferometer (FPI) and a high resolution FPI. The parameters of each optical component of the UNBF are presented in this article. The transmission curve of the aligned UNBF is measured with a tunable laser. Contrasting the result of with-UNBF and with-IF shows that the solar background received by a Licel transient recorder decreases by 50~100 times and that the SNR with-UNBF was improved by 3 times in the altitude range (35 km to 40 km) compared to with-IF at 10:26 to 10:38 on August 29, 2018. By the SNR comparison at four different times of one day, the ratio-values are larger than 1 over the altitude range (25~50 km) in general, the results illustrate that the SNR with-UNBF is better than that with-IF for Rayleigh Lidar during daytime and they demonstrate the effective improvements of solar background restriction of UNBF.

• ETRI Journal
• /
• 제27권3호
• /
• pp.334-336
• /
• 2005

We improved the performance of the spectrum-sliced light source for wavelength-division-multiplexed passive optical networks by employing a Fabry-Perot laser diode(FP-LD). We found that the FP-LDs can suppress the intensity noise as significantly as using a gain-saturated semiconductor optical amplifier. The transmission characteristics were measured and analyzed in both conditions with and without employing an FP-LD.

• Current Optics and Photonics
• /
• 제4권5호
• /
• pp.405-410
• /
• 2020

A new all-optical flip-flop (AOFF) method based on the absorption nulls of an injection-locked Fabry-Perot laser diode (FP-LD) in transverse magnetic (TM) mode is proposed and experimentally demonstrated. For the set and reset operations of the AOFF, injection locking and the destructive minus of beating in transverse electric (TE) mode are used. The absorption nulls on the TM mode are modulated according to the operations, and then non-inverted (Q) and inverted (${\bar{Q}}$) outputs can be obtained simultaneously. Thanks to the use of several absorption nulls, the proposed AOFF can achieve multiple outputs with extinction ratios of more than 15 dB. Even though the experiment is demonstrated at 100 Mbit/s, the results of previous experiments using the injection of a CW holding beam imply that the operation speed can increase to 10 Gbit/s.

• Journal of the Optical Society of Korea
• /
• 제11권3호
• /
• pp.93-96
• /
• 2007

We demonstrate a 240 km reach DWDM-PON at 8-Gb/s capacity based on wavelength-locked Fabry-Perot laser diodes and a bidirectional EDFA. We achieve a packet-error-free transmission in both the 64 upstream and 64 downstream channels, guaranteeing a 125 Mb/s symmetric data rate per user. There is no noticeable dispersion penalty. The power penalty due to the crosstalk induced by the DWDM transmission and detuning between AWGs is less than 1.2 dB, when the detuning is within ${\pm}0.12 nm$.

• Journal of the Optical Society of Korea
• /
• 제11권3호
• /
• pp.101-107
• /
• 2007

In this paper, we have presented the results of Wavelength Division Multiplexing-Passive Optical Network (WDM-PON) based fiber-to-the-home (FTTH) field trial test which was held in the city of Gwangju. We have implemented an injection locked Fabry-Perot Laser Diode (FP-LD) based WDM-PON system and reliably delivered Internet Protocol TV (IP-TV), networked Personal Video Recorder (N-PVR), High-Definition Video on Demand (HD-VoD), Education on Demand (EoD) and Internet service as FTTH service through the system during the field trial test. We have also verified that the WDM-PON system worked well to provide quality of service (QoS) guaranteed 100Mbps bandwidth per subscriber. Furthermore, we have presented network designing issues in Outside Plant (OSP) and Customer Premises Network (CPN) that should be overcome to efficiently deploy FTTH service. Finally, based on the field trial test results, we proposed FTTH service deployment strategies.

• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.326-336
• /
• 2008

A WDM-PON has been considered as an ultimate solution for access networks. However, there were many technical and practical issues for commercial deployment. These issues were solved with wavelength locked F-P LD and the WDM-PONs employing this optical source were commercialized. These WDM-PON systems have been deployed in Korea, Europe, and US. We reviewed wavelength locking technology and WDM-PON achievements. When we inject spectrum sliced broadband light into an F-P LD, the multimode output is changed to a quasi single mode. Then, we can use the single mode light for WDM signal transmission. The broad spectral gain of the semiconductor gain medium enables a color-free operation of WDM-PON, i.e., an identical ONT can be used for each user. The wavelength locking properties depend on many parameters, especially alignment of injection wavelength to a lasing mode, passband profile of AWG and front facet reflectivity of F-P LD. However, these dependencies can be reduced by proper design of the laser and the injection bandwidth. Thus, WDM-PON systems have been achieved with color-free operation.

• 대한전자공학회논문지SD
• /
• 제37권7호
• /
• pp.17-28
• /
• 2000

DFB(Distributed Feedback) 및 DBR(Distributed Bragg Reflector) 레이저 다이오드의 모델링에 많이 사용되는 시간 변수가 있는 결합 파동 방정식의 수치해를 효율적으로 구할 수 있는 새로운 방법을 제안 하였다. 이 방법에서는 결합 파동 방정식을 두 세트의 방정식으로 분리하여 해석한다. 한 세트의 방정식들에는 위상 인자 및 이득 인자만 포함되고, 다른 한 세트의 방정식에는 결합항만이 포함된다. 본 논문에서 SS-TDM(Split-Step Time Domain Model)이라고 명명한 새로운 수치해석법은 기존의 방법에 비하여 매시간 스텝당 계산 시간은 비슷한 반면에 분할 구간의 수가 10배 이상 적게 하여도 정확한 결과를 얻을 수 있음을 확인하였다.

• 한국광학회지
• /
• 제9권2호
• /
• pp.96-99
• /
• 1998

본 연구에서는 새로운 광피드백 장기 안정화법을 제안하고 실험적으로 그 가능성을 입증하였다. 제안한 방법은 광로장을 제어하는 방법으로써 지금까지와는 다른 고감도의 광피드백 위상 변별 기법을 도입하였다. 이는 외부 반사체로 사용한 공초점 패브리-페로 공진기의 반사모드의 편광 분광법에 의하여 위상 변별 신호를 얻어내는 것이다. 실험 결과 약 20시간 정도의 안정된 제어 상태를 유지하였다. 이 실험에서 사용한 광학계가 각각의 분리된 광학 요소를 광학 테이블에 배열한 불안정한 상태였으므로 광학계의 크기를 줄이고 각 광학적 요소를 하나의 판 위에 고정시킴으로서 일체화시킨다면 안정된 제어의 유지시간을 대폭 늘일 수 있을 것이다.