• 전자공학회논문지D
• /
• 제36D권7호
• /
• pp.50-55
• /
• 1999

Separate confinement heterostructure(SCH) 구조를 갖는 InGaAs/InGaAsP 다중양자우물구조의 상호섞임을 이용하여 광도파로를 제작하였다. 광도파로는 $CH_4/H_2$ 혼합가스를 이용한 반응성 이온 식각 방식으로 제작하였으며, 제작된 광도파로는 폭이 $5{\mu}m$이고, 식각 깊이가 $1.2{\mu}m$이다. 광도파로의 전송손실은 tunable laser를 이용한 Fabry-Perot 간섭현상을 이용하여 측정하였다. $800^{\circ}C$, 30s 열처리한 후 제작된 광도파로는 1550,nm TE 모드에서 3.76dB/cm, TM 모드에서 3.95dB/cm의 전송손실을 보였다. 이 전송 손실은 지금까지 ,IFVD를 이용해 제작한 광도파로와 비교해서 매우 작은 값이다. 따라서, 이 방법은 광도파로등의 수동소자와 전자소자의 집적에 응용될 수 있다.

• 전기전자학회논문지
• /
• 제11권3호
• /
• pp.117-121
• /
• 2007

20 GHz and 40 GHz micro/millimeter-wave photonic pulse trains have been generated from a fiber ring laser with a semiconductor optical amplifier (SOA) by injecting 2 GHz gain-switched Fabry-Perot laser diode (GS-FPLD) output. To achieve efficient cross-gain modulation in the SOA at 20 GHz and 40 GHz, individual lasing modes of the 2 GHz GS-FPLD output separated to 25 and 50 picoseconds respectively by passing dispersion compensating fibers.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.383-386
• /
• 2008

We developed a fiber-optic Bragg grating sensor system using a SOA fiber laser for over heat detection in power systems. To compensate the nonlinear wavelength tuning of the fiber laser, we used fixed passband wavelengths from Fabry-Perot ITU filter as reference wavelengths. Gaussian line-fitting algorithm was also used to reduce the FBG peak detection error. Compared with a highest-peak-detection and a polynomial-fitting method, the proposed Gaussian fitting algorithm could drastically reduce the measurement errors. Also the SOA fiber laser made it possible to enhance the signal-to-noise-ratio even with several kilometers of lead fiber.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2207-2208
• /
• 1999

In this paper, we would like to study the oscillation characteristics of single mode fiber laser which is composed of a Fabry-Perot resonator, a pump source of 808nm Laser Diode, a $Er^{3+}$ doped single mode fiber with 0.5um diameter.

• Current Optics and Photonics
• /
• 제5권6호
• /
• pp.721-729
• /
• 2021

We demonstrate a Pr³⁺:YLF 639.7-nm laser with single-frequency output based on the Q-switched pre-lase technology, pumped by a fiber-coupled GaN blue laser diode. The pre-lase technology is realized by the step-type loss of the acousto-optical Q-switched device. The conclusions of the theoretical research are verified experimentally. The mode-suppression ratio was 44 dB at the single-frequency laser output. Detection by interferometer verified the realization of the stable single-frequency laser. In addition, the emission spectrum had a linewidth of 139.9 MHz, measured by Fabry-Perot interferometer. The single-frequency laser's single-peak power was over 19.7 W with 98.8-ns pulse duration, obtained under an absorption power of 1.74 W.

• ETRI Journal
• /
• 제27권3호
• /
• pp.337-340
• /
• 2005

A spot-size converted Fabry-Perot laser diode (LD) was flip-chip bonded to a silica-terraced planar lightwave circuit(PLC) platform to examine the effect of the silica terrace on the heat dissipation of the LD module. From the measurement of the light-current characteristics, it was discovered that the silica terrace itself is not a strong thermal barrier, but the encapsulation of the integrated LD with an index-matching polymer resin more or less deteriorates the heat dissipation.

• 한국광학회지
• /
• 제20권3호
• /
• pp.189-194
• /
• 2009

광섬유 일체형으로 된 파브리-페롯 가변 필터를 레이저 공진기에 삽입하고, 1300 nm 대역의 반도체 광 증폭기를 이득매질로 이용하여 링 공진기 형태의 파장 훑음 레이저를 구현하였다. 파장 훑음 레이저의 훑음 주파수에 따른 레이저 출력 특성을 시간영역과 파장영역에서 분석하였다. 파장 훑음 주파수가 증가하면 레이저 출력이 급격하게 줄어들고, 훑음 반치폭도 감소한다. 또한 훑음 주파수 증가에 따라 전방 훑음과 후방 훑음의 광 세기가 비대칭으로 나타나며, 실제 응용 시스템에 적용할 수 있는 제한요소로 작용한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.439-441
• /
• 2012

본 논문에서는 Self-Seeding 방식의 F-P LD를 이용하여 WDM-PON에서의 새로운 파장 가변 광원 구조에 대하여 제안한다. 제안된 광원은 매우 간단한 구조를 갖고도 약 20 nm 정도의 큰 파장 대역을 갖는 장점을 가졌다. 상대적 잡음 밀도(RIN)은 약 -124dB/Hz로 나타났으며, 외부 변조기를 통해 외부 변조한 결과 10Gb/s 신호에 대한 변조 가능성을 확인 할 수 있었다.

• Current Optics and Photonics
• /
• 제6권3호
• /
• pp.282-287
• /
• 2022

Narrowing the spectral linewidth and improving the wavelength stability of high-power laser diodes (HPLDs) are both in high demand for rapidly maturing industrial laser applications. In this study, we investigate the spectral behavior of a commercial HPLD bar module composed of 19 laser diodes (LDs) in a single-layered bar with a built-in volume Bragg grating (VBG) and an additional cascaded VBG. Optical loss due to the extra cascaded VBG is kept below 5% when the optical output is 5 W or more. The full width at half maximum of the Fabry-Perot peak from the cascaded VBG is reduced to about 12.4% and 29.1% at the edge (1^st LD) and center (10^th LD) of the HPLD bar module respectively, compared to using only a built-in VBG at an optical power of 10 W or more. In addition, fine wavelength tuning is achieved by temperature control of the extra VBG, and the obtained wavelength-tuning range amounts to about 10.6 pm/K.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.71-76
• /
• 2005

The defects evaluation of the interior and the surface would be considered as vital characteristics in predicting the total life span of the steel structure. More importantly, the understandings in the interior composite of welding zone and the notifications in the presence, the formation, and the positioning of the non-metallic inclusion are necessary as well, since there were signs of relatively high defect frequency presented in the welding zone. The ultrasonic testing is a highly recommended technique chosen from among other techniques because of variety of advantages in conducting the non-destructive testing for the welding zone. However, the ultrasonic testing had technical disadvantages referred as followings; the problems due to the couplant between the PZT and the specimen, the formations that were miniature and complex, the moving subject, and the high temperature surrounding the specimen. This research was conducted to resolve the technical disadvantages of the contact ultrasonic testing by studying the non-contact ultrasonic testing where the ultrasonic waves were transferred by the laser, and revealing the specimen defects at its interior part and its surface part. The ultimate goal of this research was to develop a non-destructive evaluation applying the laser manipulated ultrasonic method for the steel structure.