• 제목/요약/키워드: Fabric surface

검색결과 660건 처리시간 0.025초

아크릴산 그라프트 중합한 나일론 직물의 헤모글로빈 오구 세척성 -그라프트 나일론 직물에 대한 헤모글로빈 부착상태와 세척성- (Removal of Hemoglobin from Acrylic Acid Grafted Nylon Fabric The Removal and the State of Adhesion of Hemoglobin on Grafted Nylon Fabric-)

  • 오수민;김인영;송화순
    • 한국염색가공학회지
    • /
    • 제11권3호
    • /
    • pp.41-48
    • /
    • 1999
  • The removal of hemoglobin from acrylic acid grafted Nylon fabrics has been investigated. In order to change detergency of Nylon 6 fabric, acrylic acid(AA) were graft copolymerized on Nylon fabric using ammonium persulfate(APS) as a initiator, and then acrylic acid grafted Nylon was treated with NaOH solution. The graft ratio increased linearly with increasing acrylic acid concentration. The graft ratio was the highest when the concentration of APS was 0.05%, and it decreased as the concentration of APS increased. The surface of Nylon fabric became rough due to graft. Moisture regain was increased by graft and alkaline treatment, contact angle was also improved compared with the ungrafted. The hemoglobin was easily solubilized and removed from grafted Nylon fabric, while it was difficult to remove hemoglobin from ungrafted Nylon fabric. The effects of graft on removal of hemoglobin was related with increase of moisture regain and transformation of COOH to COONa by alkaline treatment.

  • PDF

폐견사류의 미세분말화 및 표면 가공제 적용 (Preparation of Fine Silk Powder and It′s Application for Surface Modification)

  • 이용우;이광길;여주홍;김종호
    • 한국잠사곤충학회지
    • /
    • 제43권1호
    • /
    • pp.41-48
    • /
    • 2001
  • The purification, dissolution and powdering of stained waste silk obtained from weaving and dyeing process were studied for the surface modification of textile fabric and plastic materials. The whiteness of stained waste silk could be improved through degumming and bleaching with sodium hydrosulfite. The water-soluble fibroin solution can be obtained by dissoving the degummed waste silk in a boiling solution of 50% calcium chloride for 60 minutes. The salts and heavy metals contained in fibroin solution were removed by electric dialysis, wool fiber filtration and gel filtration chromatography. The fibroin powder was prepared by using a fine grinder after the alkali treatment for weakening the silk fiber. The fine fibroin powder of particle size around 30 ㎛ was obtained with a ultra fine-mill, while it was finer below 10 ㎛ with a ball-mill. The dissolved or powdered silk was applied to the surface of fabric with addition of the binder (a urethane resin). The moisture content of polyester and nylon fabrics treated with the silk solution was improved due to hygroscopic property of silk. The fine fibroin powder mixed with the binder ws coated on the surface of synthetic film by use of the air pressed sprayer. It was revealed that the hygroscopicity as well as the softness of fibroin powder coated film was much improved. Therefore, it is thought that the fine silk fibroin powder is applicable as an coating agent for the surface modification of plastic and synthetic leather.

  • PDF

청소년의 자세 교정을 위한 감성 공학적 셔츠 디자인에 관한 연구 (A study on shirts design for postural stability of teenagers considering human sensibility ergonomics)

  • 방혜경;임영문
    • 대한안전경영과학회지
    • /
    • 제17권1호
    • /
    • pp.139-148
    • /
    • 2015
  • For design research of teenagers' posture correcting shirt, postures of teenagers were analyzed and became the base of inventing suitable patterns. The subjects of this study were 198 of both female and male middle school students from the city of Seoul. Students' postures in classroom and length change of body surface were observed and analyzed; based on this, total of 5 postures was selected, and length changes of body surface were applied. The patterns in this study were designed with stretch material to help antagonism by muscle movements. Each fabric that was used in this study had 110% of stretch, 120~140% of stretch, and 150~170% of stretch. Both of one-way-fabric and duplex-fabric were used in this study, depending on application site.

텐셀 혼방 직물의 키토산 가공처리를 통한 감성기능 소재의 개발 (제1보) - 표면구조 분석 및 태 평가 - (Development of Susceptible Functional Fiber through Chitosan Finishing Treatment of Tencel Blended Fabrics (Part I) - Surface Structure Analysis and Hand Value Assessment -)

  • 박연희;배현숙
    • 한국의류학회지
    • /
    • 제29권7호
    • /
    • pp.987-996
    • /
    • 2005
  • For cationization, if chitosan, which has the affinity for a human body and reacts easily without inducing any pollution, is used, cationization of Tencel blended fabrics can be expected and further expansion of its use as a new susceptible material can be expected. Therefore, in this study, in order to compare a Tencel/cotton and a Tencel/Cotton/PET as Tencel blended fabrics with a Tencel single fabric, the fabric samples were used and processed with chitosan after NaOH pretreatment and enzyme treatment thereof, and then its adherent efficiency was enhanced by using a crosslinking agent, and then it was got to be finished with a softener. The fibril of Tencel fabric was controlled by enzyme treatment so that the surface of the Tencel blended fabrics got to be smooth. Chitosan adhered to the surface of the Tencel blended fabrics in the form of particles through its processing with chitosan. Chitosan treatment caused little change in the crystal structure thereof and the thermal stability of the Tencel/Cotton/PET fabric was slightly improved. The total hand value(THV) calculated on the basis of the change due to chitosan treatment was increased in all samples.

라미네이팅 투습방수 직물의 태와 선호도 평가 (Hand and Preference Evaluation of Laminated Waterproof Breathable Fabric)

  • 노의경;오경화
    • 한국의류산업학회지
    • /
    • 제17권5호
    • /
    • pp.854-861
    • /
    • 2015
  • This study evaluates the objective and subjective hand as well as the preference for hand and outdoor jackets on laminated waterproof breathable fabrics with different constituent characteristics to identify those best suited for consumer needs. Mechanical properties and objective hands were measured by the KES-FB system. The subjective hand and the preference of laminated waterproof breathable fabric for outdoor jackets were rated by the 20's and 30's women experts with tactile and visual senses that utilized a questionnaire with a seven-point semantic differential scale; subsequently, the flexibility and compressive elasticity of laminated waterproof breathable fabrics were low. However, light and thin waterproof breathable fabrics with a smooth surface had high scores in smoothness, fullness & softness and total hand value. In addition, laminated waterproof breathable fabrics were classified into three hand factors: flexibility, density, and surface properties. There were significant differences on flexibility and surface property perceptions, hand and out-door jackets preferences according to the characteristics of waterproof breathable fabrics. The hand preference of the laminated waterproof breathable fabric improved with decreasing 2HB and increasing EM. However, EM showed positive effect for outdoor jacket preferences. Those that were flexible and smooth were preferred for outdoor jackets.

염액의 wicking성이 양모의 저온 염색에 미치는 영향 (Effect of Wickability on Low Temperature Dyeing of Wool)

  • 도성국
    • 한국의류산업학회지
    • /
    • 제9권1호
    • /
    • pp.113-118
    • /
    • 2007
  • It is well recognized that the wicking of liquids in a textile fabric takes place mainly through a capillary system composed of the individual fibers. Considering typical dyeing stages, it is thought that a high dye uptake on the fabric probably depends on the wickability. Three kinds of barely water soluble ketones, acetophenone(A), 2-pentanone(2P) and 3-pentanone(3P) were separately dissolved in methanol(M) and then each was mixed with aqueous solution of C. I. Red Acid 114. Wicking heights of dyeing solutions were measured under such conditions that the effect of gravity was negligible. The result could be graphed as a series of straight lines having the form s = $kt^{1/2}$, where s was distance traveled by the solutions, t was time, and k was slope of the line. The surface tension(${\gamma}$) of the ketones had more signifcant effect on the wickability compared to the viscosity(${\eta}$) of them. The greater wickability resulted in the higher dye uptake on the fabric and the order of wickabilty was equal to that of the surface tension(${\gamma}$) and dye uptake on the fabric, A>3P>2P>M.

알칼리 감양가공이 Polyester 직물의 세척성에 미치는 영향 -표면구조의 효과를 중심으로- (A Study on the Detergency of Alkali-treated Polyester Fabric - The effects of surface structure-)

  • 신혜원;김성련
    • 한국의류학회지
    • /
    • 제10권2호
    • /
    • pp.1-9
    • /
    • 1986
  • To study the effects of surface structure of fiber on the decrement of fatty soil removal at high temperature, the following variables were selected: controled and alkali-treated P.E.T.(polyester) fabrics and chopped fibers as substrates to estimate the detergencies, different aging methods of soiled substrates, and different washing temperatures and surfactant solutions. Radiotagged tripalmitin was used as soil and the detergency was estimated by means of liquid scintillation counting method. The results were as following: The surface of the fiber became rough with many grooves and the hydrophilicity of the fiber was increased and the structure of the fabric became loose by alkali treatment. While the detergency of alkali-treated P.E.T. fabric was better than that of controled P. E. T. fabric, there was no significant differences between the detergencies of controled and alkali-treated chopped fibers. These results indicate that the increment of detergency of alkali-treated P.E.T. fabric is mainly resulted from the changes of fabric structure and the improved hydrophilicity of fiber by alkai treatment. The detergency of tripalmitin was increased with elevating temp. below the m.p. of tripalmitin, was decreased around the m.p., and again was increased above the m.p ..It is considered that the decrement of detergency around the m.p. is due to the diffusion of molten tripalmitin into the grooves on fiber surface, the inner part of fiber, and between fibers. When controled and alkali-treated soiled fabrics and soiled chopped fibers were washed in the distilled water and in the Na-DBS solution respectively, below $60^{\circ}C$ detergencies of alkali-treated fabrics and chopped fibers were improved. However above $60^{\circ}C$ this result was reversed. Therefore these results are regarded as the effects of grooves on fiber surface at high temp. and improved hydrophilicity at low temp. by alkali treatment. When controled and alkali-treated soiled fabrics and soiled chopped fibers were hot-aged before washing, the detergencies of both species were decreased generally. Because the soil was diffused into the grooves on fiber surface, the inner part of fiber, and between fibers during hot-aging. The detergencies of hot-aged species were also decreased above certain temp.. These results suggest that the decrement of detergency at high temp. be resulted not only from the diffusion of soil into the grooves on fiber surface, the inner part of fiber, and between fibers, but also from the characteristics of surfactant solutions.

  • PDF

염축가공에 의한 견직물 천연염색의 새로운 표면 디자인 구현기법 개발 (Development of New Surface Design Technique for Natural Dyeing of Silk Fabric by Salt-Shrinkage Finishing)

  • 김채연;유동일;신윤숙
    • 한국염색가공학회지
    • /
    • 제28권3호
    • /
    • pp.189-194
    • /
    • 2016
  • The objectives of this research were to study the effect of salt-shrinkage finishing of silk on shrinkage degree and dyeing property of cochineal, and to investigate the efficacy of obtained results for imparting surface design effect on silk fabric. Ultimately it was aimed to suggest a technical process for developing natural dyed silk products with diverse design. Premordanted silk fabric was treated with $Ca(NO_3)_2$ solution(gravity: 1.45) at $90^{\circ}C$ for 1 min, washed, dried for further evaluation. The shrinkage of salt-treated fabric was calculated. The effects of salt treatment on the dye uptake of cochineal and colorfastness were investigated. The degrees of shrinkage were 10% and 3% for warp and weft, respectively. The salt treatment resulted in improving dye uptake of cochineal slightly. In addition, it improved colorfastness to washing and light. On the basis of the results, a technical process composed of premordanting, salt treatment and natural dyeing was suggested and using the process, two examples of textile design were presented. It can be concluded to impart various three dimensional surface design effect on silk fabric by applying salt-shrinkage finishing with combination of natural dyeing and mordanting.

고밀도 직물의 반복세탁 및 세탁조건에 따른 투습.발수성 변화 (Changes in Moisture Permeability and Waterproofness of High-density Fabric by Repeated Laundering and Condition)

  • 노의경;한정은;김은애
    • 한국의류학회지
    • /
    • 제34권11호
    • /
    • pp.1798-1811
    • /
    • 2010
  • This research evaluates the changes in the comfort-related properties of high-density fabric, such as moisture permeability and waterproofness, in order to assess the relative importance of laundry conditions for clothing properties after repeated laundering and suggest the best laundering conditions for high-density fabric through the identification of the most influential factor. A commercial high-density fabric was washed 25 times in a drum-type washer using nine different laundry conditions based on profiles derived from a fractional factorial design. To evaluate the changes in the comfort-related properties of the fabric, pore size, air permeability, water vapor transport, water repellency, and water resistance were measured. The comfort-related properties of the fabric deteriorated after repeated laundering by the damaged surface finish; in addition, the damaged surface also changed the pore size. As a result, the water repellency and water resistance decreased. The detergent was the most responsible factor to change the properties among the four factors of detergent, hardness, temperature, and RPM. The best laundering conditions for the fabric was a neutral detergent, soft water of 70ppm, a temperature of $15^{\circ}C$, and 30rpm.

PET, Tencel, Cotton MVS 혼방사로 제직된 침구용 직물의 성능평가 (Bedding Fabric Performance Using Polyester, Tencel and Cotton MVS Blended Spun Yarns)

  • 사아나;이정순
    • 한국의류학회지
    • /
    • 제41권1호
    • /
    • pp.17-27
    • /
    • 2017
  • This study evaluated the performance of bedding fabrics consisting of warp (150d/144f, polyester) and weft (polyester, Tencel and cotton MVS blended spun yarn) with blend ratio of weft. We measured electrostatic propensity, moisture properties, pilling properties and mechanical properties of the fabrics for this study. F-P fabric showed outstanding moisture properties and pilling properties. However, tensile properties and electrostatic propensity were relatively inferior to other characteristic values. Significant static electricity may make F-P fabric uncomfortable. F-P7C3 fabric showed outstanding moisture properties and pilling properties. Static electricity may make F-P7C3 fabric uncomfortable; in addition, F-P5C5 fabric showed outstanding moisture properties and pilling properties. Rough and stiff hand feel were expected to increase because tensile properties decreased and surface properties increased. F-C fabric showed outstanding pilling properties and electrostatic propensity. However, it showed inferior moisture control properties. F-P5T4C1 fabric showed outstanding moisture properties, pilling properties and electrostatic propensity. Several properties are outstanding; however, the hand feels are very rough and stiff from bending. The water evaporation and static electricity increased with increasing polyester content. As the content of cotton increased, tensile properties were improved. However, water evaporation and static electricity decreased. The addition of Tencel increased the thickness and compression energy so that it exhibited a soft characteristic upon compression and an excellent moisture control properties, but the surface became somewhat coarse.