• 한국염색가공학회지
• /
• 제26권3호
• /
• pp.201-208
• /
• 2014

The high value-added functionality for synthetic fiber can be considered through a plasma enhanced treatment. In this study, PET(Polyethyleneterephthalate) was treated with a glow plasma and corona treatment. Surface characteristics of treated fabric were investigated using electron scanning microscopy(SEM), contact angle, X-ray photoelectron spectroscopy(XPS), tensile and adhesion strength. It was found that the contact angle showed $85.5^{\circ}$ for untreated fabric, $0^{\circ}$ for plasma and corona treatment at the condition of 200W for 7min. By XPS analysis, atomic ratio of O 1s/C 1s was increased from 0.27 to 0.43 by glow plasma and 0.27 to 0.41 by corona treatment at 200W for 7min, respectively. Glow plasma and corona treatment did not significantly change the tensile strength of PET fabric. Adhesion strength showed a substantial enhancement for the surface treated with the glow plasma, while corona treatment was adversely affected.

• 패션비즈니스
• /
• 제8권6호
• /
• pp.137-145
• /
• 2004

According to the experimental results, it has been reported by several researchers that the air-permeability values of the fabrics mostly decreased by the mordanting during the dyeing procedure. The exact quantitative information, however, has not been presented so far. In this study, the change of the fabric air-permeability was investigated quantitatively. At the same time, the change of the fabric air-permeability according to the dyeing procedure. In order to investigate the possibility of the detachment of the metal ions on the fiber or fabric surface, the change of the air-permeability was investigated after several rinsing of the mordanted fabrics. By comparing the color differences of the cochineal dyed fabrics which were subjected to rinsing procedure after mordanting, the effect of the rinsing of the mordanted fabrics on the dyeing of fabrics was investigated. At the range of mordant concentration, 2% Cu, 2% Sn, 2% Fe, 2% Cr, 5% Al, the metal ions are not excessively absorbed on the fiber surface. Also, any remarkable detachment of the metal ions does not accompany after the mordanting with the subsequent rinsing procedure.

• 한국의류학회지
• /
• 제15권4호
• /
• pp.367-372
• /
• 1991

In this study, we discussed about the factors effected upon the initial maximum value of heat flux ($q_{max}$). Thermal conductivity, thermal transmittance and surface air cavity of wool fabrics were examind and their correlation to the $q_{max}$ was studied. The factors were examined which had an effect upon the $q_{max}$ of an objective measure of warm/cool feeling. It was simulated by Thermo-Labo apparatures. We selected twenty sorts of pure wool woven fabrics for men's fall -winter cloth (all Wool). The conclusions are as follows; 1. There was not a certain correlation between the $q_{max}$ and the thermal conductivity of wool fabric. 2. When the fabrics touched on the copper plates, the thickness of wool fabric had a negative correlation to the $q_{max}$. The thermal transmittance had a positive correlation. Both of them had a good correlation to the $q_{max}$. 3. As a major factor, the thickness of fabric effected on the $q_{max}$.

• 한국표면공학회지
• /
• 제56권5호
• /
• pp.309-319
• /
• 2023

Non-woven fabric is a textile product made by spinning thermoplastic polymers without manufacturing processes such as stretching, doubling, twisting, weaving, and knitting to form a sheet-shaped web in which fibers are tangled with each other, and then combining them by mechanical and physical methods. In addition, the non-woven fabric manufacturing process has various raw material choices, high productivity, so it is a textile manufacturing technology that can have various uses and increase added value. This study was conducted to control the shape and physical properties of products by improving the manufacturing method of melt-blown non-woven fabrics using process technology that easily changes the shape of non-woven fabrics and improves mechanical properties. In particular, it is considered that a non-woven fabric with a thin material shape and improved mechanical properties will be easily applied to a continuous secondary battery manufacturing industry such as roll to roll operation.

• 센서학회지
• /
• 제29권5호
• /
• pp.360-364
• /
• 2020

In this study, the colorimetric sensor, polyester (PET) fabric dyed with lead (II) acetate (Pb(C₂H₃O₂)₂), was fabricated and characterized for the detection of the hydrogen sulfide (H₂S). The surface morphology of the fabric was determined using scanning electron microscope and energy-dispersive X-ray spectroscopy. The optical properties of the fabric were evaluated by measuring the variation in the blue value of an RGB sensor. The fabric showed a significant color change, high linearity (R² : 0.98256), and fast response time (< 1.0 s) when exposed to H₂S. This is because the sensor is highly porous and permeable to the gas. The fabric can not only be used as a hydrogen sulfide sensor but also be used to detect and prevent H₂S influx using sticky tape on pipelines.

• 한국의류학회지
• /
• 제27권11호
• /
• pp.1318-1329
• /
• 2003

The purpose of this study was to examine the effects of the structural characteristics of men's suit fabrics on the texture image and the preference, and to analyze the relationship between the preference and the practical sales ratio. In addition, the texture images and the preference of fabric and jackets made of the same fabrics were compared. As specimen, jackets for men's suit of 2002' S/S and their fabrics were collected. Questionnaires composed of 22 sensibility related and 21 fabric image related adjectives were developed. For the subjective evaluation of the texture image, both jackets and fabric samples were tested. Tests were performed with 100 female subjects in clothing department and apparel industry. For the objective evaluation, structural characteristics such as fiber contents, yarn twist, fabric count, thickness and weight were analyzed. Total Hand Value were calculated from mechanical properties determined by the KES-FB system. Factor analysis showed sensibilities were classified into 6 categories; "surface roughness", "weight", "density", "stiffness", "elasticity" and "wetness". Fabric images were classified into 4 categories; "classic", "original", "practical", and "stuffy". Depending on the method to show the specimen to the subjects, whether it is suit or fabric, statistically significant differences were observed with a number of adjectives for sensibilities and fabric images. The results of THV of KES did not agree with the preference of subjects, which suggests that we should be careful when using the KES system, which was developed for Japanese people. Price was considered to be another factor besides the texture image that influenced on purchase.

• 복식
• /
• 제63권4호
• /
• pp.158-167
• /
• 2013

The cotton fabric armour for lower class soldiers can be found from the historical records of the mid-Joseon Korea. And the records show that the form and the structure of the armour was modified in the late 19th century in order to provide better protection from gunshots for the soldiers in the midst of the invasions from the West. This is a survey and research of the only artifact of the cotton fabric armour remaining in Korea - for its form, dimensions, and design. Using the historical records as reference, we can confirm the structure and characteristics of the cotton fabric armour of the Joseon period. This cotton fabric armour, preserved in National Museum of Korea, is a vest-type armour made of 30 layers of cotton. On the right shoulder, there is a button for tying knots and strings were tied under both armpits. On the surface of the cotton fabric armour there were some characters and patterns stamped in black. Presently, this artifact in Korea is the only specimen relic of its sort, but there are some other related relics in foreign countries including helmets and belts. Continuous researches would help extend the scope of armour study beyond the traditional researches that only focuses on the armours of the officials, thus helping us to understand the military costumes in traditional Korea.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1545-1548
• /
• 2014

• 한국염색가공학회지
• /
• 제23권3호
• /
• pp.155-162
• /
• 2011

para-Aramid has limited dyeability because of its highly crystalline structure and compactness. To improve the dyeability of the para-aramid to reactive dyes of bright color in deep shade, the fabrics were photografted under continuous UV irradiation with dimethylaminopropyl methacrylamide and 4-benzoyl benzoic acid as a monomer and a hydrogen -abstractable photoinitiator respectively. A UV energy of 35J/$cm^2$ and a photoinitiator concentration of ten percent or more with respect to the monomer in the formulation was required for optimal photografting. Grafting yield increased with higher monomer application level. Surface analysis indicated significant alterations in the atomic composition of the photografted fabric surface and the fabric surface was covered with the grafted polymers. While the pristine para-aramid fabrics showed no appreciable dyeability to the ${\alpha}$-bromoacrylamide reactive dyes, the grafted para-aramid fabrics enhanced the dyeability to the reactive dyes substantially. In case of C.I. Reactive Blue 50, a K/S value of 8.7 can be obtained with the grafted para-aramid fabrics with a grafting yield of 2.3 %. Also the color fastness properties of the dyed fabrics was excellent in the conditions of washing, rubbing and light irradiation.

• 한국염색가공학회지
• /
• 제32권1호
• /
• pp.44-50
• /
• 2020

In this study, pre-treatment was performed on kapok, a hydrophobic fiber, to compare dyeability by hydrophilization. The pretreatment conditions of kapok fiber were used with different amounts of sodium oleate(NaO), a fatty acid-based anionic surfactant, and xanthan gum(XG) as a natural thickener. At this time, NaO and XG were separately or mixed treated with 0.01%, 0.1%, 1% aqueous solution at 80℃ for 30 min. Hydrophilicity through dyeing was confirmed using Sappan wood extract. Therefore, SEM observation was performed to investigate the surface change of kapok fiber according to the conditions. The surface color difference was also analyzed. Pretreated kapok fibers were made from nonwoven fabrics and the contact angles were measured to determine their hydrophilization. The surface of the fiber after pretreatment was found to be cracked when NaO and NaO were mixed with XG. The surface color was the highest in a^⁎ and K/S values after the simultaneous treatment of NaO and XG, followed by NaO pretreatment and XG pretreatment. The contact angle of kapok fiber made of nonwoven fabric was slightly lower at 300g/㎡ than the fabric weight of 150g/㎡. Such hydrophilized nonwoven kapok fiber are expected to be used in various fields.