• 한국환경과학회지
• /
• 제15권10호
• /
• pp.945-949
• /
• 2006

For a membrane bio-reactor, it is possible to fillet and separate activated sludge and effluent by head loss of centimeters, if non-woven fabric material is used as titration media. However, if non-woven fabric material is used to thicken high-concentration sludge, excessive sludge attachment causes the rapid decrease of flux. Mesh with fore sizes of $100{\mu}m,\;150{\mu}m,\;and\;200{\mu}m$ allows for easy separation of attached sludge. This study examined the possibility of mesh as filtration media. Existing close-flow filtration process, which requires maintaining sludge movement, makes It difficult to obtain high thickening rate. With a view of complementing this weakness, this study has made an experimental examination on how high-concentration sludge (about 3,000mg/L to 10,000mg/L) will be filtered and thickened when mesh module is submersed in the bio-reactor. Effluent flowed from the bottom of the bio-reactor by head loss of 65cm. In case of pore size of $100{\mu}m$, SS showed high recovery of 80% to 96%; therefore, it has been decided that mesh can be used as filtration media. Filtration lasted for more than 9 hours, until sludge with 9,000mg/L in MLSS concentration was thickened 9 times as dense. In the range from 3,610mg/L to 9,060mg/L in MLSS concentration, it was possible to obtain effluent with less than 2mg/L in MLSS concentration within 10 minutes.

• 한국지반공학회지:지반
• /
• 제12권4호
• /
• pp.157-178
• /
• 1996

기존의 보강토벽체에 주로 이용되어온 steel strict등 고강도 인장보강재는 주변 뒤채움흙에 비해 상대적으로 변형이 작기 때문에, 설계검토시 과강재 자체에서 유발되는 변형의 크기에 대해서는 크게 유의할 필요가 없었다. 그러나 비교적 저강도인 섬유보강재의 경우, 한계상태에서 예상되는 섬유보강재 자체의 변형량은 주변 뒤채움흙의 소성변형 유발에 필요시 되는 변형량을 종종 초과하게 되며, 이와같은 크기의 과도한 변형량은 보강토벽체 구조체 자체의 안정성 확보 측면에서 허용할 수 없는 경우가 대부분이다. 결국 보증토벽체 구조체의 전면부 발생변위에 대한 일반적인 허용조건을 충족하기 위해서는, 극한강도 보다 훨씬 작은 크기의 강도가 섬유보강재의 경우 발휘하는 것으로 보아야 할 것이며, 따라서 최종적인 구조체 안정검토를 위해서는 보강재 자체의 예상변형량에 대한 평가가 섬유보강재의 경우 특히 중요시 된다. 보강재의 인장응력 -변형률 관계는 강보강재의 경우 선형탄성거동으로 가정할 수 있으나, 섬 유보강재의 경우에는 일반적으로 비 선형거동을 나타낸다. 본 연구에서는 쌍곡선 함수를 이용하여 섬유보강재의 비선형 거동특성을 모델링하였으며,또한 뒤채움흙 다짐으로 인한 유발응력등을 고려하기 위해 Ehrlich SE Mitchell, Duncan등이 제안한 방법을 수정하여 섬유 보강토벽체의 안정 해석법을 제시하였다. 본 안정 해석법 에서는 침투수압의 영향 및 뒤채움흙의 구속효과에 따른 섬유보강재의 부분적인 상대강성 변화 등을 고려하였으며, 이를 토대로 깊이별 각 섬유보 강재의 최대인장력 및 변형량 등의 예측이 가능하다. 본 연구에서는 제시하리라 하는 안정해석법의 적용성을 위해, paraweb polyester fibre multicord, non-woven polyester 지오텍스타일 및 knitted polyester 지오그리드 등 3가지 종류 보강재의 인장응력-변형률 관계 실험결과를 회귀분석하여 쌍곡선 함수형태로 이와같은 섬유보 강재의 비선형거동을 모델링하였다. 또한 이를 토대로 한 븐 연구 해석법의 적합성 검토를 위해, Ho & Rowe가 제시한 유한요소해석결과 및 LCPC, FHWA등에서 시행한 시험결과와 깊이별 각 섬유보강재의 최대인장력,변형량 및 지점별 변형률 등에 대해서도 비교하였다. 아울러 섬유 보강재의 상대강성, 뒤채움흙의 깊이별 구속효과의 정도, 다짐정도 및 침투수압 등이 각 섬유보강재의 변형량 및 전체적인 변형형태 등에 미치는 영향을 종합적으로 분석하였다.

• 연구논문집
• /
• 통권29호
• /
• pp.111-121
• /
• 1999

고속 Rapier loom에서 경사와 위사의 조직을 완성하여 직물을 제직하는 위입과 바듸침 기구는 캠구동 방식으로 동일축선 상에 4개의 캠이 설치되어 있다. 이들 캠들은 2개씩 한쌍을 이루면서 서로 공액운동을 수행하고 있으므로 정확한 설계에 의한 동기화운동이 필수적이다. 따라서 본 연구는 전체 거동의 파악을 위한 시스템의 정확한 해석과 컴퓨터 시뮬레이션을 통한 Rapier loom의 고속화를 목적으로, 위입과 바듸침기구의 곡선선정 및 캠의 회전에 따라 정확한 운동을 유도할 수 있도록 2가지 운동의 연관성은 물론 동시에 화면상에 구현할 수 있는 4개의 캠기구에 대한 시뮬레이션 프로그램을 개발하는 것이다.

• 한국의류산업학회지
• /
• 제10권6호
• /
• pp.1023-1035
• /
• 2008

This study conducted a survey to find out dermatitis patients' preferred garment performance and their sentiment in spring/summer knitwears. SPSS 12.0 program was used for factor analysis, frequency analysis, T-test, ANOVA, and Duncan test. The result was as follows; First, in garments, patients required 'health hygiene', 'practicality in use care', 'skin contact' and 'easy movement'. Especially, 'skin contact' is an important property to be considered in patients' clothes. Second, in garment sensitivity, patients importantly considered 'modesty', 'feminine', 'boldness', 'decency', 'easy movement', 'youth', and 'simplicity'. Third, patients preferred simple and modest plain knitwear in light color with thin and soft fabric such as plain knit. And especially, dot pattern in knitwears should be avoided. Fourth, the preferred style of patients was that 'appropriately fit with suitable ease.' They also preferred 'front closed,' ; 'boat neckline' and 'V neckline'; 'raglan sleeve' and 'set-in sleeve'. For hem trim, they preferred 'rib'. Male preferred simple and plain style with round collar of 'tubular trim' and 'rib trim', while female preferred sophisticated and characteristic style with setin sleeve.

• 복식문화연구
• /
• 제4권1호
• /
• pp.93-109
• /
• 1996

Madeleine Vionnet, a representative designer of the 1920′s, who made prefectly organized clothes with unique formativeness was the first to express fabric in a modern method and was called "The architect of fashion". This is because she developed a three dimensional design by expressing cloth-she rejected corset, should pad, etc-into elegant curved lines that do not stick to the body. By granting meaning to the beauty of the body and its movement in her own unique ways, she emphasized the formativeness in her work and gave shape to creative artistry. Expecially with the "Bias-Cut" she could express the lines of the body more flexibly and could make geometrical styles like the diamond shape dress or the triangle dress more effectively. Using the "Tired Bias cut" and "Handkerchief point" she let the skirt hemline dangle irregularly in geometrical forms, thus showing modern formative sense which forms a three dimensional solidness along the movement of the human body. Thus far, analyzed how the contemporary trend of art was reflected in her designs by studying her work; also investigated through her artistic characteristics and pattern method. Also be tried to find out what can be learned through her artistic view and superb formativeness as a designer.

• 감성과학
• /
• 제13권2호
• /
• pp.391-402
• /
• 2010

전기방사한 나노섬유 웹은 가는 섬유직경과 수많은 미세공극 구조로 인해 우수한 투습성 및 차단 성능을 나타내며, 초박막 초경량의 특성을 갖는다. 이러한 특성 때문에 새로운 투습방수 소재로서 전기방사한 나노섬유 웹을 이용하고자 하는 시도가 이루어지고 있으며, 본 연구에서는 나노섬유 웹 처리소재의 역학적 특성을 측정하고 이를 기존 투습방수 소재와 비교함으로써 기능적 성능과 더불어 감성적 성능을 만족시키는 새로운 투습방수 소재 개발을 위한 기초자료를 제시하고자 하였다. 실험실 제작(lab-scale) 나노섬유 웹과 대량생산(commercial) 나노섬유 웹을 이용하여 웹 밀도와 기반 직물, 적층 구조, 라미네이팅 여부 등에 차이를 두어 다양한 전기방사 나노섬유 웹 처리소재를 제작하였다. 이들 시료에 대해 KES-FB system을 이용하여 역학적 특성을 평가하고, 이를 기존 투습방수 소재인 고밀도 직물, PTFE 라미네이팅 직물, PU 코팅 직물의 역학적 특성치와 비교하였다. 연구 결과, 실험실에서 제작한 나노섬유 웹 처리소재는 부피감이 있으면서 유연하였고, 대량생산된 나노섬유 웹을 라미네이팅한 소재는 신장 변형이 적은, 치밀한 구조의 소재인 것으로 나타났다. 또한 고밀도 직물과 실험실 제작 나노섬유 웹 처리소재는 낮은 인장선형성과 굽힘강성, 전단강성으로 유사한 거동을 나타내어, 기존 PU 코팅이나 PTFE 라미네이팅 직물에 비해 뻣뻣함이 덜하면서 유연하고 부드러운 태를 가지는 것으로 해석되었다. 따라서 전기방사 나노섬유 웹 처리소재가 일정 수준의 방수성을 확보한다면 기능적 성능과 감성적 성능을 모두 충족시키는 새로운 투습방수 소재로 이용될 수 있을 것으로 사료된다.

• 복식문화연구
• /
• 제6권4호
• /
• pp.84-103
• /
• 1998

The purpose of this study si focused on Futurism style and contemporary fashion in the 20th century, by researching the Giacomo Balla, Fortunato Depero, Tullio Crali, Erenesto Thayate characteristics fashion design. The results of this study are following as : The general traits of Futurism style are classified with aesthetics, formative characteristics. First, aesthetic characteristics are based on H. Bergson's life-phylosophy and F. Nietzche's art theory. Second, formative characteristics is Dynamism. Futurism Dynamism are classified with psychological Dynamism and physical Dynamism. Futurism trends in the costume : first, dynamism in fashion design, second, asymmetrical balance, third, formativeness, forth, technology, fifth, anti-traditionalism. Dynamism are expressed textile, pattern and costuem shape in contemporary dress. Asymmetrical balance are expressed costume silhouette shape and framework through the geometrical asymmetrical balance. Formativeness are agree with Paco Rabanne's fashion design expressed body and movement and phychological world of human through the secondly fabric. Technology are expressed new mechanical dynamism in used technology art and new fashion material by metal. The last, anti-traditionalism is recognized new value and idea in fashion.

• 패션비즈니스
• /
• 제6권3호
• /
• pp.1-14
• /
• 2002

According to Scythian tradition, many burials contained numerous artifacts, from weapons and harness to everyday objects and a multiplicity of personal adornments. Most valuable of all is the Scythian Gold often lavishly decorated with precious stones. The detailed images on these pieces make it possible for us to picture the appearance of the Scythians, their clothes and weapons. Scythian Gold Plaques were attached to the fabric in such a way that when they moved with each movement of the wearer it created what must have been a dazzling sight in bright daylight. Scythian Gold Plaques were divided into several types according to the shape, animal style(curved beast shape, profile shape, head reversed over its back shape), round shape, quadrilateral form, star shape, flower shape, crescent shape, bundle shape, human appearance. Through the antique tombs bequests of Three Kingdom States hereby describe the original forms of their source of Baekje gold plaque were influenced by Scythe style. Like nearly all Scythian ornaments, such gold pieces were designed to maximize various magical powers and to signify the owner's importance relative to his fellow tribesmen.

• 한국의류학회지
• /
• 제23권1호
• /
• pp.30-41
• /
• 1999

This study was conducted to verify the advantages of Gal-Ot. Gal-Ot is defined the clothings dyed with persimmon juice. Firstly the physical properties of fabrics were examined. Secondly the wear tests were conducted. The wear tests were performed in climatic chamber controlled 3$0^{\circ}C$ air temperature 50$\pm$5% R.H and 0.2m/s air movement. Four women subjects participated in this experiment and 4 times experiments were performed per one subject. The expeimental schedule was planned following 4 steps that is sedentary posture during 30 minutes-walking the 5。slope treadmill by 70m/min during 20 minutes-sedentary posture during 20 minutes-standing posture on toward the blowing wind during 10 minutes. The results obtained is as folows : The insulation of fabric was increased with dyeing with persimmon juice. The air permeability of fabric was remarkably increased with dyeing with persimmon juice. The mean skin temperatures of subjects were apt to be higher in wearing Gal-Ot than undyed clothing. The clothing micro temperature of subjects were slightly inclined to become lower in wearing Gal-Ot than undyed clothing, The clothing micro humidity was decreasee when: the subjects were gal-Ot than wore undyed clothing, And then it brought about more comfortable on wear sensation. The differences of physiological reactions were not consistent between clothing types except for sweat rate on the back. This result may be attributed the to complex experimental schdules consisted of four steps and to a little difference between open type and close type. However I consider that the clothing type of Gal-Ot is suitable for open type because Gal-Ot is summer wear for blocking the sultry heat.

• 한국의류산업학회지
• /
• 제13권5호
• /
• pp.759-768
• /
• 2011

This study is designed to understand current wearing conditions of air force mechanic parkas and evaluate their functionality by examining the wearing conditions and wearers' subjective assessment. By doing so, it also intends to identify issues that require improvements; and to provide basic data for future development of air force mechanic parkas. A survey was conducted as a study methodology, and the collected 1,628 questionnaires were analyzed. Findings of this study are as follows. 1. In the usability assessment, it was found that visibility of body sides was needed to be enhanced since reflective tapes were attached only to the front and back of the body; pockets were too big, but not convenient to keep mechanic tools; the design of hiding hood was not suitable for water-proof clothing; and a new design of size-controllable hood was called for since the hood blocked eye sight. With respect to the fabric, dissatisfaction was identified with durability, cold-proof and fire-proof features. 2. In the mobility assessment, respondents showed low satisfaction with collar heights and neck girths. Mobility score was over moderate level on average, except the parka length that obstructs wearers' movement, and neck and collar size. 3. In the wearability assessment, respondents presented moderate satisfaction with pleasantness, weight, pressure and dampness. However, insulation was found unsatisfactory. Based on the result, this study proposed improvement plans on design, pattern and fabric; and is expected to serve as basic data for developing more effective and functional air force mechanic parkas.