• 한국소음진동공학회논문집
• /
• 제26권4호
• /
• pp.375-382
• /
• 2016

The mechanical property of a carbon-fiber-reinforced plastic (CFRP) is subjected to two elements, carbon fiber and polymer resin, in a first step and the selection of multi-layered structure is second one. Many combination of fabric layers, i.e. plainweave, twillweave, can be derived for candidates of test specimen used for a basic mechanical components so that a reliable identification of dynamic nature of possible multi-layered structures are essential during the development of CFRP based component system. In this paper, three kinds of multi-layered structure specimens were prepared and the dynamic characteristics of service specimens were conducted through classical modal test process with impact hammer. In addition, the design sensitivity analysis based on transmissibility function was applied for the measured response data so that the response sensitivity for each resonance frequency were compared for three CFRP test specimens. Finally, the evaluation of CFRP specimen over different multi-layered fabric structures are commented from the experimental consequences.

• 한국의상디자인학회:학술대회논문집
• /
• 한국의상디자인학회 2004년도 International Conference & Exhibition
• /
• pp.95-97
• /
• 2004

• 한국의상디자인학회지
• /
• 제23권1호
• /
• pp.37-45
• /
• 2021

This study observed the release of microplastics according to washing weights and filtering conditions, measured microplastic generation rates, fiber lengths, and fiber diameters. This study attempted to present data for the development of filters that decrease microplastic generation. For test samples, polyester piled knit fabric (cut-pile) was selected, which currently has the highest amount of consumption in the clothing industry, but can easily cause marine pollution because of its low biodegradability. For test equipment, a drum washer was used and microplastics were collected using two filter pore sizes, 5 ㎛ and 20-25 ㎛. Microplastic fibers weights and lengths were measured. The results of the experiment showed the following: 1) The release of microplastics differed according to the fabric weights and washing process; 2) washing fabric weights showed a differences in the collection amount according to the filter pore size (5 ㎛, 20-25 ㎛); 3) observations of differences in the lengths of the microplastics that occur during the washing process by filter pore size were made. Fibers with shorter lengths appeared with filter pore sizes of 5㎛ in comparison to filter pore sizes of 20-25㎛. The results from this study on microplastic generation by fabric during washing, demonstrated the following conclusions that can be used to reduce the release of microplastics. First, the release of microplastics according to fabric weights and washing courses are affected by physical force. Therefore, it is necessary to reduce the amount of physical force due to water flow, increase the fabric weight, or wash the material in low temperatures. Second, in the manufacturing of washing machines, microplastic filtration can be promoted or legislatation supporting microplastic filtration can be introduced.

• 복식
• /
• 제64권2호
• /
• pp.126-134
• /
• 2014

This study studied female Hanbok that appeared in Korean movies in different periods, and investigated the changes and flow of the Hanbok in the movies based on the design and the form. Research scope is limited to Hanbok in Korean movies released between 1950' and 1980', and in order to study Hanbok in movies, snapshots of Korean movies for each period are used. Pictures are sourced from the Korean movie database, and forms and colors of Hanbok in the pictures are classified into 7 categories. Based on this, characteristics, changes and flow of Hanbok for each period are studied. Based on this, by investigating the Hanbok in Korean movies from silhouette and design perspectives and comparing each period, it is found that the following changes have been made: From 1950' to 1980', generally Min Jeogori (Normal Korean traditional jacket) had a higher rate. Up to early 1960', wide collar and collar strip were trends, but from 70' to 80', they have been remarkably narrowed. After liberation, ease and functional elements of western clothing were accepted. From 1950' to 80', generally wide and round shape sleeve were used. Also, from 50' to 80', normally skirt and Jeogori had the same color and fabric. Lastly. as Hanbok with western style fabric, rather than traditional Hanbok fabric was increasing, Hanbok with variously patterned fabric was shown. The lack of colored pictures led of limited research materials, and so a more accurate and sophisticated research on material and design was not possible, However, it is meaningful that this study has investigated changes and flow of Hanbok in modern Korean movies.

• 한국의류산업학회지
• /
• 제14권2호
• /
• pp.277-285
• /
• 2012

This research studied how to develop tight upper sportswear from 3D scan data considering fabric stretch property. Subjects were five Korean men of average figure in their 20's. Scanning was done for ten postures via vitus smart/pro(Techmath LTD). Analyzing from 3D scan data, more than 70% of the upper body surface showed surface change rate under 20%. It was shoulder and under arm side part that showed most noticeable body surface change when moving. A parametric model with convex surface was generated and flattened onto the plane, resulting 2D pattern. The error rate occurring in the process of 3D to 2D conversion was 0.2% for outline and 0.13% for area, respectively. Thirteen kinds of stretchable fabrics in the market were collected for this study. Stretch property was in the range of 16.0~58.2% for wale direction; 23.1~78.4% for course. Based on wear trial test, four fabrics were chosen for making the 1st experimental garment and finally one fabric was chosen for the 2nd one, which was developed applying 4 kinds of crosswise reduction rate on 2D pattern: 0, 5, 10, and 15%. Through wear trial test and garment pressure measurement, experimental garment applied with 10% pattern reduction rate was evaluated as most comfortable and considerable.

• 한국생활과학회지
• /
• 제20권5호
• /
• pp.1025-1034
• /
• 2011

The purpose of this study was to examine the evaluation of fabric characteristics on the drapability, texture image and preference of blouse fabrics, and to analyze the effects of the texture image, objective and subjective drapability on the preference. As specimen, silk and polyester fabrics were collected. 52 female subjects evaluated 16 specimens with semantic differential scale of 18 fabric image and 20 sensibility. Data were analyzed through factor analysis, pearson correlational coefficient using spss win 12.0. For the evaluation, structural characteristics such as fiber contents, weave type, weight and thickness were analyzed. The results were as follows: The evaluation results of objective and subjective drapability showed differences. Sensory image factors of blouse fabrics were 'surface smoothness', 'elasticity', 'weight' and 'flexibility'. Sensibility image factors were 'elegance', 'classic', 'characteristic' and 'mannish'. 'Elegance', 'classic' and 'characteristic' of sensibility images showed high correlation with 'surface smoothness' and 'elasticity' of sensory image, also 'mannish' of sensibility image showed significant correlation with 'weight' of sensory image. The significant fabric characteristics affecting objective drapability were density, weight, thickness. The significant texture image factors affecting objective drapability were 'weight', 'flexibility' of sensory image and 'elegance' of sensibility image. On the other hand, the significant factors affecting subjective drapability were thickness of fabric characteristics and 'elegance', 'characteristic', 'mannish' of sensibility images. 'Elegance', 'characteristic' and 'classic' of sensibility image, 'elasticity' of sensory image and subjective drapability affected on the purchase preference.

• 감성과학
• /
• 제13권1호
• /
• pp.279-284
• /
• 2010

본 연구는 직물구조 디자인의 데이터 베이스에 대한 기초 연구를 수행한다. 이를 위해서 소모직물과 면직물들의 직물밀도계수가 월츠 교수와 피카놀 회사에서 제안된 커버팩터와 관련시켜 분석되고 토의된다. 또한 소모직물과 면직물의 직물밀도계수와 커버팩터와의 관계가 직물조직과 실의 번수에 따라 분석 토의된다. 끝으로 이들 천연직물들의 염색 가공공정에서의 공정수축률이 직물밀도계수와 함께 직물구조 디자인의 데이터베이스 시스템의 예비 연구로서 분석 토의된다. 그 결과는 소모직물과 면직물의 밀도계수, K 값은 600에서 1000까지 분포하였으며 이들 직물들의 직물밀도계수는 0.4에서 0.8 그리고 0.2에서 1.0의 범위에서 각각 분포하였다. 모직물의 가공축은 2%에서 10% 그리고 면직물의 가공축은 2%에서 20%까지 분포하였다. 그리고 모직물과 면직물의 직물밀도계수는 직물구조디자인에 대한 데이터 베이스의 개념으로서 직기와 직물구조 그리고 직축과 가공축에 따라서 분포됨을 보여주었다.

• Composites Research
• /
• 제33권2호
• /
• pp.61-67
• /
• 2020

프리폼 성형은 섬유 직조물을 이용한 RTM 성형에 있어서 매우 중요한 부분을 차지하고 있다. 탄소 섬유 직조물의 프리폼의 변형은 소재의 강도에 영향을 미치며, 그 중 전단 잠김 각도를 넘어서는 힘이 작용하게 되면 제품에 주름이 발생되어 RTM공정 시 불량발생의 원인이 된다. 그러므로 본 연구에서는 탄소섬유직조물의 전단변형 허용치를 정량화하고 실제 직조물의 성형과 수치모사를 이용하여 성형 특성을 검증하고자 한다. 그 결과 섬유 방향의 설정에 따른 주름의 특성을 확인하고 그 결과를 평가하였다. 앞에 언급한 물성 측정 결과들을 이용하여 수치해석을 수행하였고, 이 결과를 실험 결과와 비교 분석하였다.

• 패션비즈니스
• /
• 제23권1호
• /
• pp.37-48
• /
• 2019

WKSF (Warp-knitted spacer fabrics) knitted using a double Raschel machine is the three-dimensional knit that has vertically connected separate layers in loop structures. Because of its unique structure, the fabric is light, compressible and breathable. Owing to the high production speed, the use of the fabric is increasing in various areas. The purpose of this study is to establish the design process in the utilization of WKSF program and analyze the difference between WKSF and Neoprene as garment materials.. The study on the design related to WKSF has rarely been carried out because of the complexity of WKSF structure and the difficulties encountered in analyzing the structure and thread. Therefore, checking beforehand the simulation results similar to a final knit using the CAD program for WKSF can only enhance the efficiency of the design for the light knits. The conclusion drawn after designing the light knits using the CAD program and analyzing the pros and cons of WKSF through the various property evaluation techniques is as follows. The tension characteristic analysis results indicated that Neoprene specimen has the elastic transformation and resilience, thus behaving like an elastic product such as rubber. By contrast, in the event that clothing and fashion accessories are designed with WKSF, these products are kept in a boxy style fit so that the fabric can be applied flexibly to a curvy body line. In addition, WKSF is good in forming noticeably around a curvy body, because its resistance shear deformation is lower than that of Neoprene.

• 복식문화연구
• /
• 제30권1호
• /
• pp.50-65
• /
• 2022

The aim of this study was to provide data to enable the development of skateboarding pants. From the Chinese skateboard club SNS, 126 skateboarders in their 20s and 30s were chosen to participate in a survey. Data was gathered using a questionnaire from May 14 to May 28, 2021, and then analyzed using SPSS 23. The results concerning production were as follows: clothing sizes are generally divided into six stages: XS, S, M, L, XL, and 2XL. The silhouette is wide, and most pants have e-bands and normal hems. The pants are made from cotton-blend fabric, which is mostly moisture-absorbing and quick-drying. Baggy pants are preferred by skateboarders, with cotton being the most common fabric. The crotch, knees, and buttocks of pants are the least satisfying for skateboarders. When they skateboard, their ankles sustain the most injuries, followed by their knees and wrists. In the survey of consumers' preferences for skateboarding pants, different styles were rated in the following order: straight pant silhouette, ribbed knit and string waistband design; full-rise waist height, string hemline design; and ankle-high pants length (fit), fabric and design. The hygroscopicity and ventilation of the fabric are crucial considerations when purchasing pants. In terms of color, chromatic and pastel colors are most popular. In addition, some people expect new fibers to be used and expect protective equipment and pants to be integrated.