• Geomechanics and Engineering
• /
• v.37 no.5
• /
• pp.431-441
• /
• 2024

A newly developed line-style sand pluviator has been calibrated to prepare repeatable sand specimens of specific statuses of compactness and homogeneity for laboratory tests. Sand is falling via a bottom slot of a fixed hopper, and by moving the sample container under the slot, the container is evenly filled with sand. The pluviator is designed with high flexibility: The falling height of sand, the hopper's opening width and the relative moving speed between the hopper and the sample box can be easily adjusted. By changing these control factors, sand specimens of a wide range of densities can be prepared. A series of specimen preparation was performed using the coarse Merwede River sand. Performance of the pluviator was systematically evaluated by exploring the alteration of achievable density, as well as checking the homogeneity and fabric of the prepared samples by CT scanning. It was found that the density of prepared coarse sand samples has monotonic correlations with none of the three control factors. Furthermore, CT scanning results suggested that the prepared samples exhibited excellent homogeneity in the horizontal direction but periodical alteration of density in the vertical direction. Based on these calibration test results, a preliminary hypothesis is proposed to describe the general working principles of this type of pluviators a priori, illustrating the mechanisms dominating the non-monotonic correlations between control factors and the relative density as well as the vertically prevalent heterogeneity of specimens. Accordingly, practical recommendations are made in a unified framework in order to lessen the load of similar calibration work.

• Fibers and Polymers
• /
• v.6 no.3
• /
• pp.186-199
• /
• 2005

A selection of commercially available poly(ethy1ene terephtha1ate) fibers with different degrees of molecular alignment and crystallinity have been investigated utilizing a wide range of techniques including optical microscopy, infrared spectroscopy together with thermal and wide-angle X-ray diffraction techniques. Annealing experiments showed increased molecular alignment and crystallinity as shown by the increased values of birefringence and melting enthalpies. Crystallinity values determined from thermal analysis, density, unpolarized infrared spectroscopy and X-ray diffraction are compared and discussed in terms of the inherent capabilities and limitations of each measurement technique. The birefringence and refractive index values obtained from optical microscopy are found to decrease with increasing wavelength of light used in the experiments. The wide-angle X-ray diffraction analysis shows that the samples with relatively low orientation possess oriented non-crystalline array of chains whereas those with high molecular orientation possess well defined and oriented crystalline array of chains along the fiber axis direction. X-ray analysis showed increasing crystallite size trend with increasing molecular orientation. SEM images showed micro-cracks on low oriented fiber surfaces becoming smooth on highly oriented fiber surfaces. Excellent bending characteristics were observed with knotted fibers implying relatively easy fabric formation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.5
• /
• pp.855-866
• /
• 2016

This study explored the concept and use of two kinds of textiles goods (Cheongpo [blue textile] and Samseung) sold by Cheongpo-jeon merchants in the Joseon Dynasty of Korea. Research was conducted based on an analysis of relevant documents published during the Joseon Dynasty. The Cheongpo-jeon was a merchant group that predated 1637. They sold various imported goods such as Cheongpo, Samseung, cotton textiles, felts, hats, incense, and needles. Cheongpo and Samseung were the main products among these imported goods. Cheongpo was a blue cotton textile imported from China that was sold by Chengpo-jeon merchants. The Samseung sold by merchants was a kind of imported textile whose surface provided a feeling like cotton flannel. The concept of the two textiles were different from existing ideas. Generally, the Cheongpo was believed to be a hemp fabric dyed in blue and the Samseung was a textile with a density of three seung (a traditional density unit of textiles). Cheongpo was used as a currency for war supplies during the two Japanese invasions of Korea (1592 to 1598). In addition, it was also used to make military uniforms, tents, and flags after the Japanese invasion. Samseung was used in the combat uniforms of Chinese soldiers from Ming China during the Japanese invasion of Korea. In addition, it was continuously used to make quilted gambeson amour and some of military uniforms until the $19^{th}$ century.

• Journal of the Korean Home Economics Association
• /
• v.12 no.1
• /
• pp.459-471
• /
• 1974

This study was carried out on the thermal transmission on account of variation of weaves and researched on the selection of the most suitable weaves for warmth. Also the interrelation among the density, thickness and thermal transmission by different weaves was studied, the author has woven three fundamental weaves, five weaves derived from the fundamental weaves and two special weaves for the purpose of experiment. In weaving of fabrics for experiments the lever type hand loom was used. Testing of texture was carried out according to KS and ASTM. The thermal transmission was also tested by as cooling method which were developed by the author. The conclusions of experiments were as follows. 1. Matt weaves, honey comb weaves and satin weaves having long floating yarns have large cover factor and were thicker. these structures of the weaves were good in warmth. 2. Thermal transmission was reciprocated to the cover factor, thickness and value of cover factor multiplied by thickness : It was found that the weaves of woven fabrics for warmth had better use of satin weaves, Matt weaves, Granite weaves and Honey comb weaves. In the time of warmth is not the first purpose, had better use of Rib weaves. Plain weaves and Twill weaves with thin thickness and high thermal transmission.

• Textile Coloration and Finishing
• /
• v.9 no.4
• /
• pp.39-46
• /
• 1997

In this study, Two types of polyester fabrics were hydrolysed with NaOH using the CDR m/c of pad-steam type and the Sofleena m/c of liquor-flow type to determine the alkali hydrolysis properties of polyester fabrics. The results were as follows: Under the same conditions, the weight loss of charmeuse was about 0.5% and 2~3% higher than that of pebble with CDR m/c and with Sofleena m/c, respectively. The weft density of pebble decreased about 14picks/inch with CDR m/c and 3picks/inch with Sofleena m/c comparing to the untreated sample at 18% of weight loss, while the weft density of charmeuse decreased about 5picks/inch with CDR m/c and 2picks/inch with Sofleena m/c at 20% of weight toss. K/S value decreased almost identically within about 11% weight loss of pebble and 8% of charmeuse processed with both CDR and Sofleena. However, in the above these weight losses, K/S value of the fabrics processed with Sofleena was higher than that of fabrics processed with CDR. The bending rigidity of warp direction of the fabrics ($2{\times}10^{-2}gf.cm^2 /cm$ higher for charmeuse and ($7{\times}10^{-3}gf.cm^2 /cm$ higher for pebble) processed with CDR m/c was higher than that of the fabrics processed with Sofleena m/c.

• Macromolecular Research
• /
• v.15 no.1
• /
• pp.22-30
• /
• 2007

High water vapor permeable coating materials were prepared by blending aqueous poly(vinyl alcohol) (PVA) solution with waterborne polyurethane-urea (WBPU) dispersions synthesized by prepolymer mixing process. Stable WBPU/PVA dispersions were achieved at PVA content below 30 wt%. As the water soluble polymer PVA content increased, the number and density of total micro-pores (tunnel-like/isolated micro-pores) formed after the dissolution of PVA in water increased, and the water vapor permeability of coated Nylon fabric also increased significantly. Using WBPU/water soluble polymer PVA blends as a coating material and then dissolving PVA in water was confirmed to be an effective method to obtain prominent breathable fabrics.

• Korean Journal of Human Ecology
• /
• v.14 no.4
• /
• pp.645-651
• /
• 2005

The purpose of the study was to investigate the thermophisiological responses and subjective wearing comfort for the six lining fabrics of one-piece dress in summer environment. There were significant differences in the microclimate, the mean skin temperature and the subjective wear comfort for the lining fabrics. The mean skin temperature of rayon and acetate were lower than that of synthetic fiber. The wearing comfort of rayon and acetate were better than that of synthetic fiber. There were clear correlations between the mechanical properties and the subjective wear comfort of lining fabrics. The hygroscopicity and density of textile affected the humidity and tactile sensation of dress, and they were important factors determining the wearing comfort of one-piece dress.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2004.11a
• /
• pp.238-244
• /
• 2004

In this study we have examined Copper and Nickel double metal layer on the synthetic fabrics by electroless chemical plating. We have focused on the shielding effect of the four kinds of woven and none-woven structure against electromagnetic fields. The shielding effectiveness of Copper and Nickel double metal layer showed between 90dB and 70dB, which are closely related to the fabric structure, that is cover factor and density. The more dense, The better shielding effect.

• Journal of Fashion Business
• /
• v.12 no.4
• /
• pp.131-142
• /
• 2008

One of the major fashion trends is the naturalism and ecology-conscious trend. The natural looks required in the trend require somewhat random distribution of yarn linear density, which results in irregular appearance along the yarn. This is a technically challenging work of producing yarns that look natural far from being artificial yet maintaining the intricately aesthetic randomness without causing process disturbances. This study focused on the characteristics of fabrics made of natural cellulosic fibers including hemp, ramie, flax, and polyester fabrics. Image analysis of the fabric samples included area measurement of yarn specimen, FFT and inverse FFT. Measurements of bending resistance, thickness, air permeability, and weight were also implemented to interpret the structural differences.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.11a
• /
• pp.199-203
• /
• 2004

Fibrous arsenic (As) adsorbent was synthesized by loading zirconium (Zr) on fibrous phosphoric adsorbent that was directly synthesized by radiation-induced graft polymerization of 2-hydroxyethyl methacrylate phosphoric acid on polyethylene-coated polypropylene nonwoven fabric. Zirconium reacted with phosphoric acid grafted in the polyethylene layer. Zirconium density of the resulting adsorbent was 4.1 mmol/g. The breakthrough curve of As(V) adsorption was independent of the flow rate up to $1300\;h^{-1}$ in space velocity. The total capacity of As(V) was 2.0 mmol/g-adsorbent at pH of 2. The adsorbed Zr(IV) could be evaluated by 0.4 M sodium hydroxide solution because negligible Zr(IV) could be found in the eluted solution.