• Journal of the Korean Home Economics Association
• /
• v.37 no.2
• /
• pp.113-126
• /
• 1999

In order to investigate the detergency effect of stained cotton and PET fabric, respectively, these fabrics stained with solid soils such as carbon black, liquid paraffin, and fat and examined the detergency effect in the optimum washing condition. The evaluation of washing efficiency of washed fabrics studied by using the surface reflectance measurement before and after washing treatment. The maximum detergency effect of stained cotton and PET fabric obtained in the mixed washing liquor-bleachig agen(ml)/concentrated washig agent(g/l). To obtain the excellent detergency effect, 2-step washing treatment, pre-washing by bleaching agent only and washing by concentrated detergent, is preferred. In comparing the detergency of polyester and cotton fabric, the detergency of stained polyester fabric superior than that of stained cotton fabric because of the difference of adhesive force between soil material and fabric in preparing soled stained fabric. In this study, we also studied the degree of fabric damage by the measurement of tensile strength change. From the results of the tensile strength measurement, the damage of washed fabric before and after washing treatment was nearly changed.

• Journal of the Korean Home Economics Association
• /
• v.31 no.2
• /
• pp.189-203
• /
• 1993

The objective of this study was to investigate the changes of the fabric absorbency, stiffness and antistatic property by using a fabric softner at laundering. The samples selected in this study were cotton and polyester fabrics. The cotton fabric was treated with 1/2 times(0.035%), 1 time(0.07%), 3 times(0.21%) and 10 times(0.7%) of the commercially suggested concentration (0.07%) of the fabric softner. And polyester fabric was done at 1 time(0.07%) of that. In order to examine the effect of the fabric by using a fabric softner, the abstraction of a surface active agent and quantitative analysis was performed by using a UV/VIS Spectroscopy and the correlations among the absorbency, stiffness and antistatic property was analyzed. The results obtained from this study were as follows; 1. In the cotton fabric, fabric softner gave the degradation of absorbency, and stiffness improvement was not shown by repeated fabric softner on the cotton fabric. 2. In the polyester fabric, the absorbency increased and the stiffness in creased very slightly. Specially, it is desirable to use fabric softner on the polyester due to improvement of antistatic property.

• Textile Coloration and Finishing
• /
• v.10 no.6
• /
• pp.55-66
• /
• 1998

In order to investigate the detergency effects of various detergents to stained polyester & cotton fabric with solid soils such as carbon black, liquid paraffin and fat, the optimum washing conditions according to the types of washing agent, the assesment of detergency effect by the measurement of reflectance after and before washing were studied. The detergency effect of various detergents to stained polyester and cotton fabric increased by using the mixtures of bleaching and enzyme detergent. In order to obtain the excellent detergency effect, 2-step treatment, the pre-washing with bleaching agent and bleaching-enzyme mixture detergent treatment is preferred. In comparison of the detergency to polyester and cotton fabric, it is assumed that the detergency to polyester stained fabric was superior than that to cotton stained fabric because of the difference of adhesive force between soil material and fabric in preparing solid stained fabric.

• Journal of Fashion Business
• /
• v.10 no.6
• /
• pp.9-15
• /
• 2006

Colors of textile products or fashionable clothing play one of the most important roles. From the point of visual cues, the realism of an image is the result of a good interaction of local light scattering or transmittance model applied. A 3-dimensional CAD software was used to construct a solid plain fabric model. In order to simulate a union fabric with different warp and filling colors, rendering was performed on the fabric model. It was demonstrated that the iridescent effect, pearl effect, or superficial color change effect of the union fabric during wearer's movement could be explained using the fabric models at inclined fabric positions during viewer's observation.

• Journal of Fashion Business
• /
• v.10 no.6
• /
• pp.16-27
• /
• 2006

The purpose of this study was to examine the effects of chemical finishes on performance characteristics of microfiber blend fabrics. A 60% polyester microfiber /40% cotton blend woven fabric was finished by ten chemicals: three silicone softeners, one fluorochemical, and their mixtures. Performance characteristics examined were fabric hand attributes. Fabric hand was evaluated by instrumental measures using Kawabata KES-F system instruments. Silicone-only finishes did not change the bending properties significantly from those of the control fabric. The fluorochemical-only finish made the fabric stiffer and crisper. When the two chemicals were mixed they tended to offset this adversary effect. Most of the chemical finishes made the surface finer and smoother. Fluorochemical-only finish improved fabric strength. Likewise, dimethylpolysiloxane silicone improved fabric strength. Amino-functional hydrophilic and diamino-functional silicone softeners, on the other hand, reduced fabric strength. However, when mixed with the fluorochemical, the adversary effect was diminished.

• The Research Journal of the Costume Culture
• /
• v.11 no.3
• /
• pp.431-440
• /
• 2003

The purpose of this study is to investigate the feasibility of applying the chitosan for a natural mordant. The chitosan, a natural chelate macromolecule, is acquired from the crustacean. Investigation was focused on the change of the dyeability according to the chitosan treatment based on the Caesalpinia sappan and the color change of the dyed fabric according to the application of heavy metal mordant. The change of air permeability of the fabric with the dyeing condition was also investigated systematically. The effect of dyeing with/without mordant on the air permeability of the fabric after the chitosan treatment. It seems that the increase in the dye-uptake is attributable to the fact that chitosan forms a complex with the Caesalpinia sappan and Al during mordant dyeing of cotton fabric. For nylon fabric, the darkest color was achieved on the occasion of non-mordant dyeing of the fabric. The mordant treatment or chitosan treatment, however, reduced the dyeability. While the dyed nylon fabric could maintain the same air permeability as the grey nylon fabric, the cotton fabric lowered the air permeability after dyeing.

• The Research Journal of the Costume Culture
• /
• v.11 no.3
• /
• pp.423-430
• /
• 2003

Cotton fabric md nylon fabric were chosen as base fabric specimens for dyeing using Japanese pagoda tree colorants through chitosan, treatment. With the chitosan treatment, the dye-uptake of the treated fabric increased. This treatment is also expected to be effective in terms of environment-friendliness. The effect of the dyeing methods, mordanting or non-mordanting, and chitosan treatment on the dye-uptake and air permeability of the treated fabrics was investigated. In case of cotton fabric, Al mordanted dyeing resulted in higher dye-uptake through the chitosan treatment. Therefore, the chitosan treatment is effective in this case. Japanese pagoda tree seems to have direct affinity for nylon fabric without the mordanting treatment. In case of cotton fabric, it seems that the cellulose molecules, colorants, and the chitosan make a complex, thereby reducing the air permeability. In case of nylon fabric, due to the fact the Japanese pagoda tree colorant molecules form direct physical bonding with the nylon molecules, it seems that there is not much of air permeability reduction.

• Textile Coloration and Finishing
• /
• v.21 no.3
• /
• pp.1-9
• /
• 2009

Polycarboxylics acids are used as crosslinking agents for cotton cellulose to produce durable finished press cotton fabric. It has been observed that the strength of the cotton fabric treated with polycarboxylic acids showed significant reduction as a result of the crosslinking process. The effect of acid-catalyzed depolymerization on the tear strength of cotton fabric is investigated by evaluating the cotton fabric treated by succinic acid, which does not crosslink cotton cellulose and form little ester on the cotton fabric. We find that the tear strength of cotton fabric treated with succinic acid decreases at elevated temperature due to acid-catalyzed depolymerization of cellulose. The magnitude of fabric strength reduction increases as the acid concentration increases. At a constant acid concentration, it increases as the curing temperature and time increases. It decreases as the pH of the acid solution increases. We also find that the dissociation constant of an acid also has a significant effect on the fabric strength reduction. The magnitude of fabric tear strength reduction increases as the acid dissociation constant decreases.

• Textile Coloration and Finishing
• /
• v.12 no.3
• /
• pp.207-217
• /
• 2000

A new, high-efficiency ultrasonic fabric washing machine was developed to be an energy-efficient washing machine and to enhance fabric washing quality in washing processes of the dyeing and finishing process in the textile industry. This system is composed of ultrasonic wave generator, air blowing nozzle, torque motor for fabric tension control, and enclosed washing bath, multi-tube type exchanger, noiseless heater, air cylinder, expander roller, mangle upper and lower rollers, bend bar, dancer, shower spray nozzle, and solenoid valve, and so on. These elements are synergised for fabric washing. One of the very important principles is the low tension fabric running system. For an efficient washing effect, a counter flow system is also adopted. The new system also adopts the dancer and torque motor to control fabric tension and prevent fabric creasing. Shower spray nozzle, counter flow and overflow apparatus, and air-blowing apparatus are adopted to enhance the fabric washing effect. In this study, peach yoryu, exter, and moss crepe fabrics were washed by the general and ultrasonic washing systems under different conditions respectively. The washing efficiency was affected by the fabric running speed and characteristics of fabrics. Size content after washing increased with increasing the fabric running speed. The values in the general washing system were higher than those of the ultrasonic washing system. The changes of conductivity in the ultrasonic and the cooling bath were affected by the running time under the ultrasonic generating. The values of conductivity decreased as the experimental time passed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.11
• /
• pp.1237-1245
• /
• 2012

The effect of hydrophilicity and hydrophobicity of PET fabric on the detergency of particulate soil were investigated as functions of the concentration of hydrophilic and hydrophobic chemicals, surfactant concentration, ionic strength, adhesion and removal time, and pH. The detergency of the particulate soil was determined by the adhesion of particles to and their removal from fabric, the PET fabric and ${\alpha}-Fe_2O_3$ were used as textile materials and for the model of particulate soil, respectively. The hydrophilic and hydrophobic finish for PET fabric was treated with a polyester, silicone and fluorine organic compound of resin respectively. The adhesion of particulate soil to fabric treated with hydrophobic chemicals were slightly higher but its removal from fabric treated with hydrophobic chemicals was largely higher than fabric treated with a hydrophilic chemical regardless of solution conditions such as the concentration of hydrophilic and hydrophobic chemicals, surfactant concentration, ionic strength, adhesion and removal time, and pH. Therefore, hydrophobic treatment for fabric had a more positive effect than the hydrophilic treatment on the detergency of particulate soil.