• Microbiology and Biotechnology Letters
• /
• v.20 no.4
• /
• pp.483-490
• /
• 1992

In order to understand the transfer behavior of a particular gene in water environments, kanamycin resistance ($Km^r$) gene was tracked by Southern hybridization with DNA probe in its conjugal transfer. A $Km^r$ natural bacterial isolate and genetically modified microorganisms (GMMs) constructed from the isolate were used as donor for conjugal transfer of the $Km^r$ gene. The transfer frequencies of the $Km^r$ gene from GMM strains were generally 10 to 100 times higher than those from the natural isolate. The conjugants obtained from GMM strains in LB broth had more plasmids newly appeared, and particularly the conjugants in A Wand FW waters revealed more rearrangement in their plasmids as a function of conjugation time. When plasmids of the conjugants obtained in LB broth were Southern hybridized with DNA probe of the $Km^r$ gene, the $Km^r$ plasmids in the conjugants were detected at the same position of the plasmids in donor cells, in spite of the fact that the plasmids were highly rearranged in conjugant cells. But the $Km^r$ plasmids in the donor of DKI and DKC601, and DKC600 were not identified in the conjugants obtained after 50 h conjugation in AW and after 30 h in AW, respectively. The size of the $Km^r$ plasmids showing hybridization signal were a little changed in the conjugants obtained in A Wand FW waters. Therefore, the method of Southern hybridization with DNA probe was proved to be very specific and useful for tracking of particular genes in water environments.

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.2
• /
• pp.119-126
• /
• 2018

Background: The flowering plant Hippophae rhamnoides L. has been used for many studies on fruit or leaf extracts. This study was conducted to investigate the development of a new cosmetic material from H. rhamnoides fruits and leaves that have by antioxidant, anti-inflammatory and wrinkle improvement activities. Methods and Results: The antioxidant abilities of H. rhamnoides extracts, including of a water-soluble fruit powder (FW), a fatsoluble fruit powder (FF), a supercritical extract of fruit by-product (BS), and a mixture of leaf and fruit (MIX), were investigated in vitro. A DPPH radical assay for antioxidant activity was performed for these fractions alongside assay to evaluate the total phenolic and flavonoid content (TPC and TFC). As expected, the MIX had the highest DPPH radical scavenging activity ($RC_{50}=10.27{\mu}g/m{\ell}$), and the TPC and TFC also were highest in MIX ($225.7mg{\cdot}GAE/g$, and $25.18mg{\cdot}QE/g$, respectively). Nitric oxide (NO) production in LPS-induced RAW264.7 cells was estimated and the results indicated an over 75% decrease of NO production in FF and MIX. In other assays, the highest elastase inhibitory activity was found in FW. Conclusions: These results revealed that H. rhamnoides extracts have a high potential for antioxidant, anti-inflammatory and antiwrinkle activities. H. rhamnoides products are suggested to be applied as the functional materials of cosmetic ingredients.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.521-525
• /
• 2001

This study investigated the effects of conventional predrying and modified atmosphere (MA) on the head quality and storability of Chinese cabbage 'Norang' cultivar. Immediately after harvest, heads were predried for 2 days and MA stored in $50{\mu}m$ PE film packages at $4^{\circ}C$. MA packaging restrained Hunter L and b values of Chinese cabbage more effectively than non-packaging during storage at $4^{\circ}C$. But there was little change between the two treatments. Fresh weight decreased less in heads treated with predrying and MA than non-treatment during storage. Predried Chinese cabbage heads kept a high level of soluble solids in 4 weeks of storage, while non-packaging maintained high contents of soluble solids for 6 weeks of storage period. Chinese cabbage heads contained 7.0 mg/gFW glucose, 6.3 mg/gFW fructose, and 0.6 mg/gFW sucrose as major soluble sugars at harvest. The content of sugars decreased immediately after predrying and increased steadily after 2 weeks storage. It was found inappropriate to assess head quality of Chinese cabbage by investigating was investigated by Hunter a, firmness, dry matters content, pH, and soluble sugars after predrying and MA package. Marketability of Chinese cabbage was lost when heads were stored at room temperature in 2 weeks. It showed poor appearance of heads stored at $4^{\circ}C$ in 7 weeks. Decay occurred in Chinese cabbage stored in MA under excessive relative humidity. Predried head showed good appearance during storage at $4^{\circ}C$ for 7 weeks. As a result, Chinese cabbage heads can be successfully stored for at least 7 weeks with predrying and MA storage.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.4
• /
• pp.259-264
• /
• 2001

Typhoon and neap tide on Cochlodinium polykrikoides bloom and water temperature on disappearance of C. polykrikoides bloom were investigated to elucidate the outbreak mechanism of C. polykrikoides blooms at Naro and Namhae coastal area in South Sea of Korea. The first observation of C. polykrikoides blooms were observed when thermocline was disappeared by typhoon, tide, etc. The first blooms of C. polykrikoides were observed on neap tide or before one day from neap tide in 1996-1998 and 2000. However, thermocline was disappeared by typhoon in 1994 and 1999, the first blooms were observed early 12-30 day than 1996-1998 and 2000. The main reason of disappearance of C. polykrikoides blooms after typhoon on 1997-2000 seems to be other environmental change by typhoon rather than low water temperature. In the future, the first C. polykrikoides bloom will be appear around the first neap tide of latter part of August with breaking down of thermocline, but if the thermocline be collapsed by typhoon in July, the C. polykrikoides bloom will be appear at beginning of August. The outbreak of C. polykrikoides blooms will be explain as follows: The vegetative cells, which was germinated by environmental change or already exist in surface water at low level, input to the surface water, and then nutrients and trace metals which were suppled from out side of C. polykrikoides bloom area inflow to surface. The vegetative cells are growth by the nutrients and trace metals at suitable environmental conditions e.g. water temperature, salinity, and sufficient light.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.2
• /
• pp.81-92
• /
• 2001

According to analyses of high-resolution seismic profiles (air gun, sparker, and SBP) and a deep-drill core(YSDP 105) in the mid-eastern Yellow Sea, stratigraphic and geoacoustic models have been established and seismo-acoustic modeling has been fulfilled using ray tracing of finite element method. Stratigraphic model reflects seismo-, litho-, and chrono-stratigraphic sequences formed under a significant influence of Quaternary glacio-eustatic sea-level fluctuations. Each sequence consists of terrestrial to very-shallow-marine coarse-grained lowstand systems tract and tidal fine-grained transgressive to highstand systems tract. Based on mean grain-size data (121 samples) of the drill core, bulk density and P-wave velocity of depositional units have been inferred and extrapolated down to a depth of the recovery using the Hamilton's regression equations. As goo-acoustic parameters, the 121 pairs of bulk density and P-wave velocity have been averaged on each unit of the stratigraphic model. As a result of computer ray-tracing simulation of the subsurface strata, we have found that there are complex ray paths and many acoustic-shadow zones owing to the presence of irregular layer boundaries and low-velocity layers.

• Korean journal of food and cookery science
• /
• v.29 no.6
• /
• pp.671-677
• /
• 2013

The objective of this study was to examine the levels of free amino acids and identify the correlation between ${\gamma}$-aminobutyric acid (GABA)and L-glutamic acid contents in Kimchi during fermentation. During 2 weeks of fermentation, the acidity of Kinchi increased, i.e., the pH level decreased from 5.24 to 4.40. The content of amino acids determined using HPLC differed significantly (p < 0.05) during 7 weeks of fermentation. Over the 7 weeks of fermentation, the content of most free amino acids increased in the order L-valine > L-glutamic acid > L-glycine, except L-methionine decreased. Initially, the GABA content was found to be $72.43{\mu}M/100g$ fresh weight (fw), and it increased to $229.06{\mu}M/100g$ fw after 7 weeks. This rapid increase in the GABA content in the initial stage is considered to be due to L-glutamic acid. However, during the period of 0~7 weeks, no correlations were found between the L-glutamic acid and GABA contents.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.529-536
• /
• 2000

This paper describes the analysis of aerodynamics and the prediction of airflow induced noise around simplified pantograph. First, computational fluid dynamics (CFD) is conducted far several model to evaluate linear/nonlinear flow field characteristics due to high speed flow and the CFD results support the computational aeroacoustics. The accurate prediction of the aeroacoustic analysis is necessary for designers to control and reduce the airflow induced noise. We adopt the acoustic analogy based on Ffowcs Williams- Hawkings (FW-H) equation and predict aeroacoustic noise.

• Journal of the Korean Vacuum Society
• /
• v.15 no.3
• /
• pp.325-330
• /
• 2006

In order to verify the integrity of the first wall (FW) of the International Thermonuclear Experimental Reactor (ITER), the fabricated Cu/SS mock-up is tested in the JAEA Electron Beam Irradiation Test Stand (JEBIS). To fabricate the Cu/SS mock-up, CuCrZr and 316L authentic stainless steel (SS316L) are used for Cu alloy and steel, respectively The hot isostatic pressing (HIP) is used as a manufacturing method with a $1050^{\circ}C$ and 150 MPa. The high heat flux (HHF) test is performed using an electron beam with a heat flux of $5MW/m^2$ and a cycle of 15-sec on time and 30-sec off time. The temperature measurement in the HHF test shows good agreement with the results obtained from ANSYS code analysis, which is used for determining the HHF test conditions.

• Korean Journal of Crystallography
• /
• v.9 no.1
• /
• pp.71-76
• /
• 1998

Crystal structure of Bis(ethylenediamine)palladium(II)-Bis(oxalato)palladate(II0 has been determined by X-ray crystallography. Crystal data : (Pd(C2H8N2)2.Pd(C2O4)2), Fw=509.04, Monocline, Space Group P21/c (no=14), a=6.959(2), b=13.506(2), c=15.339(2) Å, β=99.94(3), Z=4, V=1420 Å3, Dc=2.380 gcm-3, μ=25.46cm-1, F(000)=992. The intensity data were collected with Mo-Kα radiation (λ=0.7107 Å) on an automatic four-circle diffractometer with a graphite monochromater. The structure was solved by Patterson method and refined by full matrix least-square methods using unit weights. The final R and S values were R=0.021, Rw=0.030, Rall=0.032 abd S=2.1 for 1472 observed reflections. The essentially planar complex anions form diade of interplanar distances of 3.41 Å and their diads are stacked along aaxis with interplanar separation of 3.44 Å.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.3
• /
• pp.321-327
• /
• 2019

The purpose of this study is paper is to improve the flow performance and to reduce the aerodynamic noise of air discharge system consisting of a centrifugal fan, ducts and a housing for the clothes dryer. Using computational fluid dynamics and acoustic analogy based on FW-H (Ffowcs-Williams and Hawkings) Eq., air flow field and acoustic fields of the air discharge system are investigated. To optimize aerodynamic performance and aerodynamic noise, the response surface method is employed. The two factors central composite design using the inflow and outflow angles of fan blades is adopted. The devised optimum design shows the reduction of turbulent kinetic energy in the ducts and the housing of the system, and as a result, the improved flow rate and reduce noise is confirmed. Finally, the experment using the proto-type manufactured usign the optimum design shows the increase of flow rate by 4.2 %.