• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1391-1396
• /
• 2010

Recently, communication components prefer Bluetooth or Zigbee for PAN. However, using these makes expensive and complicated products such as audio equipments, mobile phones, PC, etc. for transmitting simple messages with low rate. In this paper, we propose wireless communication method using ultrasonic in the audio frequency limit band with speakers and microphones which are in products. We suggest transmitting and receiving methods in the audio frequency limit band for transmitting data without affecting audio signal, and implement an ultrasonic communication modem. Finally, we verify the performance of the ultrasonic communication modem by experiments in an environment with background noise.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.579-585
• /
• 2006

In this study, we analysis an optical receivers using the optical preamplifier in a spectrum-sliced WDM systems. The average numbers of photons/bit, for an $10^{-9}$ error probability, counts using the OOK and FSK transmission. As a result, the theoretical sensitivity for PIN receiver and optical preamplifier receiver are approximately $9.2\times10^4\;and\;7.2\times10^2$ in the m=20, respectively. Also, the average numbers of photons/bit, for and given error probability, theoretical receiver sensitivity for Gaussian method and k-square method are approximately $9\times10^2\;and\;2.16\times10^2$ in the m=40, respectively. And the average numbers of photons/bit, for an given error probability, theoretical receiver sensitivity, OOK and FSK transmission are approximately $1.9\times10^2\;and\;3.1\times10^2$ in the m=20, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.109-112
• /
• 2010

Recently, communication components prefer Bluetooth or Zigbee for PAN. However, using these makes expensive and complicated products such as audio equipments, mobile phones, PC, etc. for transmitting simple messages with low rate. In this paper, we propose wireless communication method using ultrasonic in the audio frequency limit band with speakers and microphones which are in products. We suggest transmitting and receiving methods in the audio frequency limit band for transmitting data without affecting audio signal, and implement an ultrasonic communication modem. Finally, we verify the performance of the ultrasonic communication modem by experiments in an environment with background noise.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.370-381
• /
• 2021

This paper presented an efficient transceiver structure of multiband Frequency Shift Keying (FSK) signals with direct sequence spread spectrum for maintaining covertness and performance. In aspect to covertness, direct sequence spread spectrum method, which multiplying by Pseudo Noise (PN) codes whose rate is much higher than that of data sequence, is employed. In aspect to performance, in order to overcome performance degradation caused by multipath and Doppler spreading, we applied multiband, turbo equalization, and weighting algorithm are applied. Based on the simulation results, by applying 4 number of multiband and number of chips are 8 and 32, experiments were conducted in a lake with a distance of moving from 300 m to 500 m between the transceivers. we confirmed that the performance was improved as the number of bands and chips are increased. Furthermore, the performance of multiband was improved when the proposed weighting algorithm was applied.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.11
• /
• pp.1428-1433
• /
• 2019

Interest in mountain accidents among the technical trends of disasters in Korea is increasing continuously. When accidents occur, the most common methods are location tracking and accident reporting using smartphones, and rescue activities are being carried out by using them. In this paper, we proposed an improvement of wireless safety system for mountain climbing safety using 447 FSK. Using the 447 MHz band transmitter / receiver, it accumulates position coordinates and data through position transmission and rescue signal transmission in case of anomalies. If a sender is out of the threshold of the set area range, a danger warning notification can be generated to quickly exit the danger zone. Provide services. In addition, it is considered that the health condition of the sender is continuously checked and the receiver is warned when the specified threshold is exceeded, so that it is possible to respond to the sender's disaster.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.6
• /
• pp.59-66
• /
• 2018

In this paper, we experimented how long distance voice communication is possible After implemented PTT(Push to talk) Bi-directional radio using open source project Codec 2, which is a low speed voice codec for digital amateur radio and 900MHz FSK transceiver. In case of a general digital radio, the AMBE+2 codec, which is regarded as an industry standard in terms of performance, is expensive and has the monopoly of technology. Using the 400MHz band in terms of frequency, narrow bandwidth of DMR(12.5kHz) and DPMR(6.25kHz) is used, so the data rate is low. In the 900MHz bandwidth can be extended, which is advantageous in terms of data transmission. As a result of the voice quality and distance field test, we could find that the communication takes place within about 500m. In this paper, only voice communication is reviewed. if a review of data transmission such as a simple image is added, this solution can be used in various fields as a low cost IOT radio.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.4
• /
• pp.467-473
• /
• 1999

We have realized the two kinds of power line communication systems by the FSK MODEM. The first approach is the DS-SS (Direct suquence-spread spectrum) technique using 8 bits pseudo noise, the other is Convolutional coding method by the new algorithm. Their characteristics are comparied with each other by experimenting their Bit Error Rates (BER) in high level of Noise. The results have showed that two systems are useful to the application of HA (Home Automation) systems.

• 전기의세계
• /
• v.24 no.5
• /
• pp.32-37
• /
• 1975

The use of a Microprocessor and PROM memories in an Electronic Loop Switching System has been described. The use provides telephone service for up to 128 subscriber lines using 32 trunks with increased reliability, maintenance capabilities, and flexibility. Date Communication between the central office terminal and the remote terminal is by FSK at 1-KHz rates over an idle trunk. Software functions and traffic handling capabilities are also described.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.43-46
• /
• 2001

This paper has been studied a implementation Home Automation by PLM and Telephone system. The PLM is composed of FSK IC-chip and the circuit for the power line communication. In this paper load control was made with PIC16F84A and its communication speed was 1200 baud rates.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1251-1258
• /
• 2002

The weather FAX machine is the one of necessary of safety navigation for ship. which is the machine which make the weather image by the receiving radio signal which is modulated using FSK method and transmitted on air by coast station. after Coast station scan the weather image and broadcast the image with black dot to 1500Hz and white dot to 2300Hz using FSK modulation. This paper implement weather fax machine using only general IBM-PC by software. By using IBM-PC we can make some good functions like print, edit, save etc. The modulated signal from SSB go into RS232C port via photo coupler not to give damage to PC. by using Timer Interrupt and RS232C serial interrupt, we can measure signal frequency and remake weather image. This paper use only IBM-PC with general SSB receiver which is widely spread on the ship. so this is very economic and possible to implement mutifunctions.