• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.43-48
• /
• 1998

Prior to launch, simulated radiances of the Ocean Scanning Multispectral Imager (OSMI) will be very useful to guess the real imagery of OSMI and to check the data processing system for OSMI. The data processing system for OSMI which is one sensor of Korea Mult i - Purpose Satellite (KOMPSAT) scheduled for launch in 1999 is being developed based on the SeaWiFS Data Analysis System (SeaDAS). Such a simulation should include the spectral bands, orbital and scanning characteristics of the OSMI and KOMPSAT spacecraft. The simulation is also very helpful for finding and preparing for problem areas before launch. This paper describes a method to create simulated radiances of the OSMI over the oceans. Our method for constructing a simulated OSMI imagery is to propagate a KOMPSAT orbit over a field of Coastal Zone Color Scanner (CZCS) pigment values and to use the values and atmospheric components to calculate total radiances. A modified Brouwer - Lyddane model with drag was used for the realistic orbit prediction, the CZCS pigment data were used to compute water - leaving radiances, and a variety of radiative transfer models were used to calculate atmospheric contributions to total radiances detected by OSMI. Imagery of the simulated OSMI total radiances for 6 nominal bands was obtained. As expected, water - leaving radiances were only a small fraction of total radiances and sun glint contaminations were observed near the solar declination. Therefore, atmospheric correction is very important in the calculation of pigment concentration from total radiances. Because the imagery near the sun's glitter pattern is virtually useless and must be discarded, more advanced mission planning will be required.

• 대한수의학회지
• /
• 제40권4호
• /
• pp.683-689
• /
• 2000

The present study was carried out to investigate the blood markers of Thoroughbred horses (TB) The blood red cell types and blood protein types (biochemical polymorphisms) were tested from 1,125 Thoroughbred horses by serological and electrophoretic procedures, and their phenotypes, gene frequencies, heterozygosity, polymorphic information content values and exclusion probability were estimated. The blood group and biochemical polymorphism phenotypes observed with high frequency were Aaf(91.7%), Ca(94.7%), K-(94.5%), Ua(75.9%), P-(50.6%), Qabc(82.6%), ALB-BB(67.7%), GC-FF(92.7%), AIB-KK(99.6%), ES-II(77.9%), TF-DF1(23.6%), PI-LL(23.2%), HB-B2B2(73.6%), PGD-FS(45.4%) and genotypes Dcgm/dk(16.9%), Dbcm/cgm(13.6%), Dbcm/dk(11.9%), Dcegmn/cegmn(10.0%), Dcgm/cgm(8.7%) in TB. Alleles observed with high frequency were Aaf(0.796), Ca(0.769), Ddk(0.266), Dcgm(0.261), Dbcm(0.211), K-(0.972), P-(0.710), Qabc(0.565), Q-(0.368), Ua(0.509), $HB^{B2}$(0.858), $PGD^F$(0.634), $ALB^B$(0.825), $GC^F$(0.927), $AIB^K$(0.998), $ES^I$(0.881), $TF^{F1}$(0.346), $TF^D$(0.319), $TF^{F2}$(0.184), $PI^L$(0.479), $PI^N$(0.214), $PI^U$(0.116) in TB. The heterozygosity, polymorphic information content (PIC) and exclusion probability (PE) were calculated. The mean heterozygosity and PIC value were 0.3899 and 0.3375, respectively. The highest heterozygosity and PIC were estimated 0.7834 and 0.7492 in blood group D locus, respectively. The cumulated PE obtained by blood groups and biochemical polymorphisms was 0.9813.

• 대한수의학회지
• /
• 제45권4호
• /
• pp.575-579
• /
• 2005

A 6-month-old male Poodle was referred with chief complaint of dysponea and cough. Cyanosis was not detected. This dog was diagnosed as a case of canine patent ductus arteriosus (PDA) by X-ray and ultrasonography. Diuretics and bronchodialators were administered for 4 weeks. Clinical symptoms were not improved. Thoracotomy was done at right recumbent position. The length of ductus arteriosus was 8 mm and the diameter was 6 mm, respectively. Double ligation was performed in surgery. Continuous cardiac murmur, cough and strong femoral pulsation were disappeared after surgery. The diameters of the pulmonary artery and vein found to normal by X-ray on 10 days after operation. The diameter of the aorta measured to be larger than that of the main pulmonary artery by ultrasonography. The fractional shortening (FS) on 10 days after surgery was 17.32% by ultrasonography. The needle-acupuncture therapy was used in acupoints BL-15 as local point plus PC-6, HT-7 and HT-5 as distant points for 3 days (15 min/once/a day). The FSs were increased to 21.31% and 29.44% at 1 and on 3 days after acupuncture, respectively. The present patient was a case of typical canine PDA that showed favorable therapeutic responses by surgery combined with needle-acupuncture treatment.

• Journal of Biosystems Engineering
• /
• 제28권1호
• /
• pp.53-58
• /
• 2003

This study was carried out to design, construct, and test a greenhouse monitoring system fur the environment and status of control devices in a greenhouse from a remote site using internet. The measuring items selected out of many environmental factors were temperature, humidity, solar radiation, CO$_2$, SOx, NOx concentration, EC, pH of nutrient solution, the state of control devices, and the image of greenhouse. The developed greenhouse monitoring system was composed of the network system and the measuring module. The network system consists of the three kinds of monitors named the Croup Monitor. the Client Monitor and the Server Monitor. The results of the study are summarized as follows. 1. The measuring module named the House Monitor. which is used to watch the state of the control device and the environment of the greenhouse, was developed to a embedded monitoring module using one chip microprocessor 2. For all measuring items. the House Monitor showed a satisfactory accuracy within the range of ${\pm}$0.3%FS. The House Monitors were connected to the Croup Monitor by communication method of RS-485 type and could operate under power and communication fault condition within 10 hours. The Croup Monitor was developed to receive and display measurement data received from the House Monitors and to control the greenhouse environmental devices. 3. The images of the plants inside greenhouse were captured by PC camera and sent to the Group Monitor. The greenhouse manager was able to monitor the growth state of plants inside greenhouse without visiting individual greenhouses. 4. Remote monitoring the greenhouse environment and status of control devices was implemented in a client/server environment. The client monitor of the greenhouse manager at a remote site or other greenhouse manager was able to monitor the greenhouse environment and the state of control devices from the Server Monitor using internet.

• 지질공학
• /
• 제30권2호
• /
• pp.175-184
• /
• 2020

국내에서는 비탈면을 대상으로 유사정적해석 시 수평 지진계수에 대한 적용 규정과 적용 사례들이 많이 있지만 연직 지진계수에 대한 규정이나 사례는 미비한 실정이다. 본 연구에서는 연직 지진계수의 영향도를 검토하고자 단양군 단양읍 ◯◯리를 대상으로 현장조사 및 실내시험을 수행하고, 이를 반영하여 무한사면 안정해석 기반의 유사정적 사면안정해석을 수행하였다. 분석 결과 지진규모가 5 이하인 경우에는 연직 지진계수의 영향이 거의 없는 것으로 분석되며, 지진규모가 6 이상인 경우에는 연직 지진계수가 안전율 1.1 이하의 불안정 영역을 크게 증가시키는 것으로 나타난다. 이러한 경향은 강우가 없는 조건보다 강우가 있는 조건에서 더욱 뚜렷하게 나타난다.

• Ocean and Polar Research
• /
• 제27권4호
• /
• pp.397-417
• /
• 2005

Phytoplankton community structure and distribution pattern in the surface water around the Ieodo Ocean Research Station were investigated during seven cruises carried out from July, 2003 to October, 2004. Samples were analyzed using various tools including a microscope, flow cytometer, and HPLC. Satellite images were used to analyze spatio-temporal phytoplankton biomass distribution. SeaWiFS chlorophyll a (chl a) images showed that spring blooms occurred in April-May near the Ieodo Station, and these waters were under the influence of Changjiang Dilute Water during July-October. Also, during the July-October period, HPLC pigments data showed increasing zeaxanthin concentrations, a marker pigment of cyanobacteria whereas increasing concentrations of various other pigments such as fucoxanthin, peridinin, prasinoxanthia alloxanthin, 19'-hexanoyloxyfucoxanthin and chlorophyll b were noted during spring blooms. Such pigment marker data were consistent with picoplankton data analyzed by flow cytometer and nano-microplankton analyzed by microscope. The pigment-CHEMTAX method was used to drive the phytoplankton group apportioned chi a. Diatoms, chlorophytes, dinoflagellates, and cryptophytes comprised 25.8, 20.7, 15.9, and 14.1%, respectively, of the total chl a in May. Average cyanobacteria concentrations in July-October contributed 25.4% of the total concentration. This was the highest percent contribution and was followed by chlorophytes, diatoms, and prymnesiophytes. This study discusses results from various methods, similarities and differences in the results among those methods, and the application range of the results from different analytical methods. Also, the study reveals a detailed phytolpankton community structure in the waters around the Ieodo Station, and suggests future monitoring considerations in relation to cell morphology, ecology and diversity factors according to taxonomic groups.

• Restorative Dentistry and Endodontics
• /
• 제16권1호
• /
• pp.87-105
• /
• 1991

The purpose of this experiment was to measure the leaking and solubility of commonly used dental restorative materials - Silux plus (CS), Hi-pol (CH), Clearfil F-II, Fissureseal (FS), Glass-Ionomer cement Fuji Type II (GI), Amalgam Cavex 68 (AM), Zinc Phosphate Cement (ZP) and gutta-percha (GP) and investigate the relation between the solubility and marginal leakage. Disc-shape specimens were fabricated with each material and dipped into deionized water, 0.01M lactic acid and 0.005M KOH solution, thus the total ionic concentrations in each solution was measured with ion chromatograph after 1, 3, and 7 days, respectively. For the solubility test, each specimen was immersed in 0.001M and 0.01M lactic acid for 24 hours, respectively and total weight loss was calculated. Also, Zn leaking through the margin of restorations was measured. The obtained results were as follows: 1. The amounts of eluted ion from the eight materials were most in 0.01M lactic acid and least in deionized water. 2. Of the eight materials, the fluoride release was greatest for glass ionomer cement (GI) in 0.01 M lactic acid after 7 days. 3. In analysis of the divalent cation, Mg was eluted most for zinc phosphate cement (ZP) and Ca for Clearfil F-II (CF) in 0.01M lactic acid after 7 days. 4. In analysis of transition metals, Cu and Zn were detected only. 5. The solubility rate of eight materials was greater in 0.01M lactic acid than in 0.001M for 24 hours, for zinc phosphate cement (ZP) the rate was greatest (5.4%) in 0.001M lactic acid, and amalgam least (0.01%). 6. The Zn concentration of restorative material with Z.P.C base was greater in 0.01M lactic acid than in 0.001M lactic acid.

• 한국표면공학회지
• /
• 제49권6호
• /
• pp.555-559
• /
• 2016

A biodegradable nanofiber scaffolds using electrospining provide fibrous guidance cues for controlling cell fate that mimic the native extracellular matrix (ECM). It can create a pattern using conventional electrospining method, but has a difficulty to generate one or more pattern structures. Femtosecond(fs) laser ablation has much interested in patterning on biomaterials in order to distinguish the fundamental or systemic interaction between cell and material surface. The ablated materials with a short pulse duration using femtosecond laser that allows for precise removal of materials without transition of the inherent material properties. In this study, linear grooves and circular craters were fabricated on electrospun nanofiber scaffolds (poly-L-lactide(PLLA)) by femtosecond laser patterning processes. As parametric studies, pulse energy and beam spot size were varied to determine the effects of the laser pulse on groove size. We confirmed controlling pulse energy to $5{\mu}J-20{\mu}J$ and variation of lens maginfication of 2X, 5X, 10X, 20X created grooves of width to approximately $5{\mu}m-50{\mu}m$. Our results demonstrate that femtosecond laser processing is an effective means for flexibly structuring the surface of electrospun PLLA nanofibers.

• Imaging Science in Dentistry
• /
• 제46권2호
• /
• pp.77-85
• /
• 2016

Purpose: To analyze the relative position of the mandibular foramina (MnFs) in patients diagnosed with skeletal class III malocclusion. Materials and Methods: Computed tomography (CT) images were collected from 85 patients. The vertical lengths of each anatomic point from the five horizontal planes passing through the MnF were measured at the coronoid process, sigmoid notch, condyle, and the gonion. The distance from the anterior ramus point to the posterior ramus point on the five horizontal planes was designated the anteroposterior horizontal distance of the ramus for each plane. The perpendicular distance from each anterior ramus point to each vertical plane through the MnF was designated the horizontal distance from the anterior ramus to the MnF. The horizontal and vertical positions were examined by regression analysis. Results: Regression analysis showed the heights of the coronoid process, sigmoid notch, and condyle for the five horizontal planes were significantly related to the height of the MnF, with the highest significance associated with the MnF-mandibular plane (coefficients of determination ($R^2$): 0.424, 0.597, and 0.604, respectively). The horizontal anteroposterior length of the ramus and the distance from the anterior ramus point to the MnF were significant by regression analysis. Conclusion: The relative position of the MnF was significantly related to the vertical heights of the sigmoid notch, coronoid process, and condyle as well as to the horizontal anteroposterior length of the ascending ramus. These findings should be clinically useful for patients with skeletal class III mandibular prognathism.

• 항공우주시스템공학회지
• /
• 제12권2호
• /
• pp.37-45
• /
• 2018

차세대 중형위성에 탑재되는 2축 짐벌식 안테나는 고해상도 영상정보를 효율적으로 지상국에 송신하기 위해 적용된다. 본 연구에서는 발사 진동환경에서 상기 2축 짐벌식 안테나의 구조 건전성을 보장하기 위해 발사구속장치의 적용을 포함한 구조설계를 수행하였으며, 이에 대한 설계유효성을 입증하고자 구조해석을 실시하였다. 우선 모드 해석을 통해 발사 및 궤도환경 하에서 발사구속장치가 각각 구속 및 해제됨에 따른 안테나의 동적응답특성을 예측하였다. 또한 준정적 해석을 통해 안테나 조립체에 대한 구조 건전성을 검토하였으며, 안테나 기저면과 위성체간의 체결부 I/F에 적용된 볼트에 대한 구조 건전성을 검토하였다. 마지막으로 발사구속장치의 구속력에 따라 Ball & Socket Interface의 소켓과 볼트머리 간에 발생하는 이격 (Gapping)을 비롯해 상기 Interface에 적용된 볼트 자체의 안전여유를 산출하여 발사구속장치의 적정 구속력 범위를 결정하였다.