• 콘크리트학회논문집
• /
• 제19권4호
• /
• pp.491-497
• /
• 2007

본 연구에서는, FRP 피복 보강에 의한 철근콘크리트 구조물의 변위-기반 내진성능설계 기법을 제시하였다. FRP 피복 콘크리트 부재에 대한 비선형 휨 해석을 위한 정밀 예측을 위하여 콘크리트 및 FRP 복합재료의 다축 구성관계를 고려한 해석 모델을 제시하였다. FRP 피복 보강에 의한 내진성능설계를 위하여 기존 철근콘크리트 구조물에 적용하던 변위계수법에 의한 방법을 개선하여 성능 개선 부재의 FRP 보강 두께 결정을 위한 알고리즘을 제시하였다. 대상부재의 성능 개선 설계 적용을 통하여, 본 연구에서 제시된 방법은 성능 개선 설계에 적용하는데 쉽고 용이할 뿐만 아니라 성능 개선된 부재에 대한 비선형 지진 성능 거동을 추정하는데도 실용적인 것으로 평가된다.

• International Journal of Concrete Structures and Materials
• /
• 제7권4호
• /
• pp.265-271
• /
• 2013

Prestressed concrete cylindrical pipe (PCCP) has been widely used for the distribution of water in communal, industrial, and agricultural systems for a long time. However, as it deteriorates, structural failures have been experienced. Replacing the entire existing PCCP with partial damages is not an economical method. Currently, as a cost effective repairing method, a new approach using fiber reinforced polymer (FRP) has been applied. A new design procedure of this method was proposed considering various kinds of loading condition. However, it is not easy to apply this method for design purpose due to its complex procedures. The objective of this study is to provide a new design criteria and process for PCCP rehabilitation with FRP. Through this method, the appropriate quantities of FRP layers will be decided after examining of limit states of deteriorated PCCP. For this purpose, two deterioration conditions are assumed; fully deteriorated and partially deteriorated. Different limit states for each case are applied to decide the quantities of attached FRP. The concept of "margin of safety" is used to judge whether the design results are within the optimal ranges to satisfy all limit states.

• 콘크리트학회논문집
• /
• 제23권2호
• /
• pp.185-193
• /
• 2011

이 연구에서는 FRP 전단보강 및 무보강 콘크리트 보의 전단강도를 정확하게 평가하기 위하여 통합전단설계방법을 개발하였다. 이를 위하여, FRP의 전단강도 기여분과 콘크리트의 전단강도 기여분을 각각 정의하였다. 기존의 FRP 전단강도 평가모델과 실험 결과를 비교 분석한 결과, Triantafillou의 FRP 전단강도 평가모델이 FRP의 유효변형률과 전단강도의 추정이 우수하므로 Triantafillou의 모델을 이용하여 FRP의 전단강도 기여분을 정의하였다. 콘크리트 전단강도 기여분은 선행 연구에서 제안된 변형도 기반 전단강도모델을 이용하여 정의하였다. 콘크리트 단면의 압축대에 작용하는 압축응력과 전단응력의 상관관계를 고려하기 위하여 콘크리트 재료파괴기준을 이용하여 콘크리트 전단강도 기여분을 산정하였다. 제안한 설계방법은 기존 실험 연구 결과와 비교하여 유효성을 검증하였다. 비교 결과 제안한 설계방법은 다양한 설계변수 범위에서 FRP 전단보강 및 무보강 콘크리트 보의 전단강도를 정확하게 평가하는 것으로 나타났다.

• Computers and Concrete
• /
• 제6권2호
• /
• pp.95-108
• /
• 2009

In the current research, a displacement-based seismic design scheme to retrofit reinforced concrete columns using FRP composite materials has been proposed. An accurate prediction for the nonlinear flexural analysis of FRP jacketed concrete members has been presented under multiaxial constitutive laws of concrete and composite materials. Through modification of the displacement coefficient method (DCM) and the direct displacement-based design method (DDM) of reinforced concrete structures, two algorithms for a performance-based seismic retrofit design of reinforced concrete columns with a FRP jacket have been newly introduced. From applications to retrofit design it is known that two methods are easy to apply in retrofit design and the DCM procedure underestimates the target displacement to compare with the DDM procedure.

• 한국지진공학회논문집
• /
• 제11권2호
• /
• pp.105-113
• /
• 2007

본 연구에서는, 기존 철근 콘크리트 구조물에 적용된 직접 변위-기반 설계법을 적용 FRP 피복 보강된 성능개선 콘크리트 부재에 대한 정밀 비선형 휨 해석 및 내진성능설계의 구체적 알고리즘을 제시하였다. 비선형 휨 해석의 정밀 예측을 위하여 콘크리트 및 FRP 복합재료의 다축 구성관계를 고려하였으며, Chopra 등 (1999)이 제안한 직접 변위-기반 설계법(DDM)을 개선하여 철근콘크리트 기둥에 대한 성능개선을 위한 FRP 피복 보강을 위한 성능설계 알고리즘을 제시하였다. 제시된 직접 변위-기반 설계법은, 변위계수법과 비교하여, 비선형 거동이 큰 경우에도 목표 변위 성능 값에 대한 정확한 추정을 해준다. 이는 변위계수법이 항복 이전의 유효탄성계수를 사용하는 반면, 직접 변위-기반 설계법은 유효탄할선탄성계수를 고려하고 있어, 목표 변위에 따른 성능설계 평가에 있어서 보다 높은 연성비의 거동을 반영하고 있기 때문인 것으로 평가된다.

• Composites Research
• /
• 제19권4호
• /
• pp.39-43
• /
• 2006

A decade ago, the technology of strengthening structures using FRP composites was primitive, with very few publications. Nowadays, the potential growth of research is achieved to the wide recognition of the importance of this new technology. In fact, significant practical applications have been preceded and the development of design methods have been achieved. However, the specific design methods for each applications are still lack of design skills in spite of the wide applications of FRP composites in the construction industry. The purpose of this paper is to report the development of design methods for FRP-strengthened structures by technical review design methods and guidelines of fiber reinforced composites.

• Structural Engineering and Mechanics
• /
• 제70권6호
• /
• pp.703-710
• /
• 2019

While fiber-reinforced plastic (FRP) materials have been largely used in the retrofitting of concrete buildings, its application has been limited because of some problems such as de-bonding of FRP layers from the concrete surface. This paper is the part of a wide experimental and analytical investigation about flexural retrofitting of reinforced concrete (RC) columns using FRP and mechanical fasteners (MF). A new generation of MF is proposed, which is applicable for retrofitting of RC columns. Furthermore, generally, to evaluate a retrofitted structure the nonlinear static and dynamic analyses are the most accurate methods to estimate the performance of a structure. In the nonlinear analysis of a structure, accurate modeling of structural elements is necessary for estimation the reasonable results. So for nonlinear analysis of a structure, modeling parameters for beams, columns, and beam-column joints are essential. According to the concentrated hinge method, which is one of the most popular nonlinear modeling methods, structural members shall be modeled using concentrated or distributed plastic hinge models using modeling parameters. The nonlinear models of members should be capable of representing the inelastic response of the component. On the other hand, in performance based design to make a decision about a structure or design a new one, numerical acceptance should be determined. Modeling parameters and numerical acceptance criteria are different for buildings of different types and for different performance levels. In this paper, a new method was proposed for FRP retrofitted columns to avoid FRP debonding. For this purpose, mechanical fasteners were used to achieve the composite behavior of FRP and concrete columns. The experimental results showed that the use of the new method proposed in this paper increased the flexural strength and lateral load capacity of the columns significantly, and a good composition of FRP and RC column was achieved. Moreover, the modeling parameters and acceptance criteria were presented, which were derived from the experimental study in order to use in nonlinear analysis and performance-based design approach.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.45-46
• /
• 2009

본 연구는 CFFT(Concrete Filled FRP Tube)구조의 FRP관의 적용으로 인한 콘크리트구속효과와 PS 긴장재 도입에 따른 역학적 거동 특성을 반영하는 단면설계를 제안하고자 하였다. 이를 위해 본연구팀이 FRP로 구속된 콘크리트의 응력-변형률 관계를 기초로 실험 결과를 통하여 검증한 기 제안식을 바탕으로 실 CFFT구조의 단면설계를 수행하였으며 이는 CFFT구조의 단면설계에 잘 적용될 수 있음을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.463-468
• /
• 2002

For the Externally bonded FRP systems, flexural design method is studied focusing on the reinforcement layer of the carbon fiber sheets. As the FRP layer is added, strengthening rate increases, but not proportionally as the FRP layer increases. This is reflected in the design formula appropriately by the bond cofficients from the added layers. As the number of FRP layer increases, the stress reinforcement and FRP sheet decreases, and it generally corresponds to the decrease rate of member flexural strength. This phenomenon is appearing indentically in a design formula and experimental result. The rate of $M_{test}$ and $M_n$ is 1.19 and it is estimated as safety factor which is the reduction factor, ${\psi}_f = 0.85$.

• 대한건축학회논문집:구조계
• /
• 제35권11호
• /
• pp.137-146
• /
• 2019

Recently, the Near-Surface-Mounting method using Fiber reinforced polymer (FRP) has been developed and applied to the reinforcement of many concrete structural members. However, as a part of the fire resistance design, there is a lack of research related to fire insulation for the areas reinforced with FRP. In case of NSM reinforcement, there is a difference in the transferred temperature from the external surface to the groove corresponding to the location of the groove where the FRP is embedded, and the effect of this should be reflected in the fireproof insulation design. Therefore, in this study, after forming grooves for surface embedding in concrete blocks, fireproof insulation reinforcement was performed using Calcium Silicate (CS) fireproof board and an experiment to evaluate the temperature transfer was performed. By observing the temperature at these groove positions, the reduction of temperature transfer according to fireproof insulation detail was studied. As a result, when the NSM-FRP is properly fire-insulated using the CS-based fireproof board, the epoxy inside the groove does not reach its glass transition temperature until the external temperature reaches $800^{\circ}C$.