• Journal of Contemporary Eastern Asia
• /
• v.13 no.1
• /
• pp.57-68
• /
• 2014

This paper positions the triple-Helix as a meso-level notion, an epicycle in a grander circle of technological change, institutional change, and psychological change. Because of the differing speeds of these several kinds of change, speed is proposed as a high-level system metric. This implies that what we commonly call bridging agencies or facilitators - lawyers, venture capitalists, incubators, etc. - are better called buffering agencies, as they help to engage entities changing at different speeds. They use human judgment as well as information technologies to choose feasible timing for these engagements. The paper highlights implications for thinking about innovation diffusion: The grand cycle of socio-technical change means we should, rather, think in terms of innovation reinforcement, or a circle of innovation.

• World Technopolis Review
• /
• v.5 no.2
• /
• pp.98-107
• /
• 2016

By highlighting the efficiencies gained from regional specialization, the cluster concept has distracted economic development officials from their traditional role of diversifying regional and local economies. Clustering was a viable strategy for much of the 18 years following its original appearance in the literature. Now, two events cast doubt on the continued viability of cluster-based specialization. First, the digital convergence has blurred the boundaries that once separated one industry from another. An industry cluster strategy becomes difficult when the industry cannot be defined. Second, many cluster initiatives fail. Combining literature search with the system-theoretic notions of efficiency and redundancy, we find many factors moderate cluster success. This implies regions facing uncertain success in their cluster-building efforts should thoroughly understand their unique circumstances and build upon them. Regions with successful clusters are advised to aim for multiple related clusters or superclusters.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1081-1090
• /
• 2003

Two different electronically resonant two-dimensional spectroscopies are described. The first, two-color photon echo peak shift spectroscopy, is sensitive to correlations in transition frequency between the initial and probed (final) states. It provides new insight into the mechanism of ultrafast solvation and should prove useful for characterizing dynamics in inhomogeneous systems in general. The second technique, fifth order threepulse scattering, contains two coherence periods whose durations are controlled. The entire two-dimensional surface was recorded for a dye molecule in dilute solution and a photosynthetic light-harvesting complex. The data provide insight into the short-time dynamics of solvation and exciton relaxation, respectively.

• The Journal of Information Systems
• /
• v.17 no.2
• /
• pp.73-94
• /
• 2008

Knowledge is a fundamental assets, therefore, the ability to create, acquire, integrate, and share knowledge has emerged as a fundamental organizational capability(Sambamurthy and Subramani, 2005). This apaper reports the results of an empirical study investigating the factors of acceptance and the moderating role of resistance in Knowledge Management Systems(KMS). The research model is based on the theory of planned behavior(TPB) and technology acceptance model(TAM). It includes the perceived usefulness instead of attitude, subjective norm, perceived behavior control and intention of acceptance of KMS. Also, three external variables namely task-technology fit, organizational support, and perceived rewards are added. In the research model, all hypothrses of the baseline model and the moderating effects of resistance were found to be significant. The authors also of fred several implications based chi the findings.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.993-998
• /
• 2002

watches, air bearings and printed circuit hoards (PCB). However, it is not easy to determine optimum cutting conditions since the micro drilling process is very sensitive to various disturbances. Also, undesirable characteristics to optimize the micro drilling are small signal-to-noise ratios, drill wandering motions and high aspect ratios. Thus, in this study, experimental design methods are applied to determine optimum cutting conditions. Suing the methods, three cutting parameters, fred, step and curving speed are optimized to minimize thrust forces. Obtained conditions are verified through required experimental works. As the results, it is shown that the experimental methods can be applied to micro drilling processes to determine Optimum Cutting Conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.20-23
• /
• 2002

In silicon wafer manufacturing process, the grinding process has been adopted to improve the quality of wafer such as flatness, roughness and so on. This paper describes the effect of grinding process on the surface quality of wafer. The experiments are carried out by high precision in fred grinder with air bearing spindle. The relationship between the inclination of chuck table and the flatness of wafer is investigated, and the effect of grinding conditions including wheel speed, table speed, and feed rate on damage depth and roughness of wafer is also investigated. The experimental results show that there is close relationship between the inclination of the chuck table and the flatness of wafer, and the grinding conditions within this paper little affect the flatness of wafer and relatively high affect the damage depth of wafer.

• Proceedings of the KOR-KST Conference
• /
• 1999.10a
• /
• pp.155-160
• /
• 1999

이 연구는 도로상의 신호사거리에서 신호변환시 발생하는 혼돈지역의 개념을 이용하여 도로-철도 교차로에 설치되는 사각차단기의 운영시간을 결정하는 방법론을 제시한다. 이 방법론은 현재 미국 일리노이주에서 시카고-세인트루이스의 고속전철 노선중 6개의 교차로에 설치중인 사각차단기의 운영시간을 설정하여 제시함으로써 현장검증이 되었다. 특히, 운전자가 교차로 진입시 차단기 사이에 차량이 걸리지 않으며 혹은 정지시 안전하게 교차로 앞에서 정지하도록 하는 의사결정이 이루어 지도록 최적의 차단기 운영시간을 운전자에게 제시하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.7-14
• /
• 2000

본 글은 1999년 5월 CASA/SME Blue Book에 Jim Jordan 그리고 Fred Michel이 “Next Generation Manufacturing”라는 제목으로 게재한 자료를 편자의 의도에 따라 재편집한 것입니다. CASA(Computer and Automated Systems Association)는 SME(Society of Manufacturing Engineers)에서 활동하고 있는 하나의 분과로서 CIM Enterprise Wheel을 만들어 내 유명한 곳이기도 합니다. 저자는 본 괌에서 앞으로 10여 년 간 펼쳐질 차세대 제조 시스템에서는 지식의 경영이 가장 중요한 요소라고 정의하고 있습니다. 그리고 차세대 제조 시스템의 운영전략으로는 기업통합, 인간자원의 지적이용, 지식의 개발 및 유지, NGM 프로세스 장비 및 기술의 채용을 들고 있습니다. 차세대 제조 시스템(1)은 전월호에서 소재되었습니다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.1-8
• /
• 2002

For gasoline engines, a three-way catalytic converter that has the maximum efficiency at stoichiometric air/fuel ratio is used to clean up the exhaust gas. So a precise air/fuel ratio control is necessary to maximize the catalytic conversion efficiency, For a transient condition, a fred-forward air/fuel ratio control method that estimates the air mass inducted into a cylinder is being used. In this study, a fuel injection map that makes an accurate air/fuel ratio control possible was constructed for the very same transient condition. For the same condition above, intake air model and fuel model were refined so that fuel injection values based on air mass through a throttle valve and intake manifold pressure are equal to the map values.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.37-40
• /
• 2001

This paper presents the modeling methodology of Zinc diffusion process applied for high-speed avalanche photodiode fabrication using neural networks. Three process factors (sealing pressure, amount of Zn$_3$P$_2$ source per volume, and doping concentration of diffused layer) are examined by means of D-optimal design experiment. Then, diffusion rate and doping concentration of Zinc in diffused layer are characterized by a static response model generated by training fred-forward error back-propagation neural networks. It is observed that the process models developed here exhibit good agreement with experimental results.