• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.459-466
• /
• 2002

Modern embedded system employs a hybrid architecture which contains a general micro processor and reconfigurable devices such as FPGAS to retain flexibility and to meet timing constraints. It is a hard and important problem for embedded system designers to explore and find a right system configuration, which is known as design space exploration (DSE). With DES, it is possible to predict a final system configuration during the design phase before physical implementation. In this paper, we implement a timing analysis simulator for a DSE on a hybrid embedded system. The simulator, integrating exiting timing analysis tools for hardware and software, is designed by extending Y-chart approach, which allows quantitative performance analysis by varying design parameters. This timing analysis simulator is expected to reduce design time and costs and be used as a core module of a DSE for a hybrid embedded system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.355-366
• /
• 2022

This paper proposes a microcode-based neural network accelerator controller for artificial intelligence accelerators that can be reconstructed using a programmable architecture and provide the advantages of low-power and ultra-small chip size. In order for the target accelerator to support various neural network models, the neural network model can be converted into microcode through microcode compiler and mounted on accelerator to control the operators of the accelerator such as datapath and memory access. While the proposed controller and accelerator can run various CNN models, in this paper, we tested them using the YOLOv2-Tiny CNN model. Using a system clock of 200 MHz, the Controller and accelerator achieved an inference time of 137.9 ms/image for VOC 2012 dataset to detect object, 99.5ms/image for mask detection dataset to detect wearing mask. When implementing an accelerator equipped with the proposed controller as a silicon chip, the gate count is 618,388, which corresponds to 65.5% reduction in chip area compared with an accelerator employing a CPU-based controller (RISC-V).

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.629-638
• /
• 2005

In the System on a Chip design, the on chip bus is one of the critical factors that decides the overall system performance. Especially, in the case or reusing the IPs such as processors, DSPs and multimedia IPs that requires higher bandwidth, the bandwidth problems of on chip bus are getting more serious. Recently ARM proposes the Multi-Layer AHB BusMatrix that is a highly efficient on chip bus to solve the bandwidth problems. The Multi-Layer AHB BusMatrix allows parallel access paths between multiple masters and slaves in a system. This is achieved by using a more complex interconnection matrix and gives the benefit of increased overall bus bandwidth, and a more flexible system architecture. However, there is one clock cycle delay for each master in existing Multi-Layer AHB BusMatrix whenever the master starts new transactions or changes the slave layers because of the Input Stage and arbitration logic realized with Moore type. In this paper, we improved the existing Multi-Layer AHB BusMatrix architecture to solve the one clock cycle delay problems and to reduce the area overhead of the Input Stage. With the elimination of the Input Stage and some restrictions on the arbitration scheme, we tan take away the one clock cycle delay and reduce the area overhead. Experimental results show that the end time of total bus transaction and the average latency time of improved Multi-Layer AHB BusMatrix are improved by $20\%\;and\;24\%$ respectively. in ease of executing a number of transactions by 4-beat incrementing burst type. Besides the total area and the clock period are reduced by $22\%\;and\;29\%$ respectively, compared with existing Multi-layer AHB BusMatrix.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.1
• /
• pp.88-95
• /
• 2002

In recent years, the security of hardware and software systems is one of the most essential factor of our safe network community. As elliptic Curve Cryptosystems proposed by N. Koblitz and V. Miller independently in 1985, require fewer bits for the same security as the existing cryptosystems, for example RSA, there is a net reduction in cost size, and time. In this thesis, we propose an efficient hardware architecture of underlying field arithmetic processor for Elliptic Curve Cryptosystems, and a very useful method for implementing the architecture, especially multiplicative inverse operator over GF$GF (2^m)$ onto FPGA and futhermore VLSI, where the method is based on optimized unit operation components. We optimize the arithmetic processor for speed so that it has a resonable number of gates to implement. The proposed architecture could be applied to any finite field $F_{2m}$. According to the simulation result, though the number of gates are increased by a factor of 8.8, the multiplication speed We optimize the arithmetic processor for speed so that it has a resonable number of gates to implement. The proposed architecture could be applied to any finite field $F_{2m}$. According to the simulation result, though the number of gates are increased by a factor of 8.8, the multiplication speed and inversion speed has been improved 150 times, 480 times respectively compared with the thesis presented by Sarwono Sutikno et al. [7]. The designed underlying arithmetic processor can be also applied for implementing other crypto-processor and various finite field applications.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.9
• /
• pp.459-466
• /
• 2007

TCP/IP processing imposes a heavy load on the host CPU when it is processed by the host CPU on a very high-speed network. Recently the TCP/IP Offload Engine (TOE), which processes TCP/IP on a network adapter instead of the host CPU, has become an attractive solution to reduce the load in the host CPU. There have been two approaches to implement TOE. One is the software TOE in which TCP/IP is processed by an embedded processor and the other is the hardware TOE in which TCP/IP is processed by a dedicated ASIC. The software TOE has poor performance and the hardware TOE is neither flexible nor expandable enough to add new features. In this paper we designed and implemented a hybrid TOE architecture, in which TCP/IP is processed by cooperation of hardware and software, based on an FPGA that has two embedded processor cores. The hybrid TOE can have high performance by processing time-critical operations such as making and processing data packets in hardware. The software based on the embedded Linux performs operations that are not time-critical such as connection establishment, flow control and congestions, thus the hybrid TOE can have enough flexibility and expandability. To improve the performance of the hybrid TOE, we developed a hardware-based transmission/reception accelerator that processes important operations such as creating data packets. In the experiments the hybrid TOE shows the minimum latency of about $19{\mu}s$. The CPU utilization of the hybrid TOE is below 6 % and the maximum bandwidth of the hybrid TOE is about 675 Mbps.