• Korean Journal of Environment and Ecology
• /
• v.29 no.1
• /
• pp.81-87
• /
• 2015

This study was carried out in the peatland for estimating the paleoenvironment based on the analysis from its fossils plant and radiocarbon at the Hwayang-ri, Hyeondeok-myeon, Pyeongtaek-city, South Korea. Variety of fossil was collected from the peatland which could discriminated with naked eye and sorted into seeds, leaves, stems from four-stage of standard sieve. During analysis for the large plant fossil within the peatland, the dead plants were largely divided into 3 fossil zones according to its peatland. In the fossil zone III (the oldest layer; 6,970~6,070 yr $C^{14}$ B.P.), the observation of leaves of hydrophyte such as Trapa sp. and stems of Alnus japonica which appeared in wetland means that the environment was influenced by the climate changes such as rainfall increasing and sea level rise. In the fossil zone II (the middle layer; 6,070~5,800 yr C14 B.P.), the occurrence of Gramineae, Cyperaceae and Fagaceae indicate that the environmental condition might be more or less dry by decreasing rainfall and drop in sea level. The fossil zone I (the recent layer; 5,800~4,540 yr $C^{14}$ B.P.) where lots of herbaceous plants, increasing of Fagaceae, decreasing of A. japonica. and distribution of Pinaceae were showed, was inferred to be repeated both dry and wet environment due to human disturbance.

• Corrosion Science and Technology
• /
• v.4 no.4
• /
• pp.140-146
• /
• 2005

Fossil fired power plant produces the electric energy by using a thermal energy by the combustion of fossil fuels as like oil, gas and coal. The exhausted flue gas by the combustion of oil etc. contains usually many contaminated species, and especially sulfur-content has been controlled strictly and then FGD (Flue Gas Desulfurization) facility should be installed in every fossil fired power plant. To minimize the content of contaminations in final exhaust gas, high corrosive environment including sulfuric acid (it was formed during the process which $SO_2$ gas combined with $Mg(OH)_2$ solution) can be formed in cooling zone of FGD facility and severe corrosion damage is reported in this zone. These conditions are formed when duct materials are immersed in fluid that flows on the duct floors or when exhausted gas is condensed into thin layered medium and contacts with materials of the duct walls and roofs. These environments make troublesome corrosion and air pollution problems that are occurred from the leakage of those ducts. The frequent shut down and repairing works of the FGD systems also demand costs and low efficiencies of those facilities. In general, high corrosion resistant materials have been used to solve this problem. However, corrosion problems have severely occurred in a cooling zone even though high corrosion resistant materials were used. In this work, a new technology has been proposed to solve the corrosion problem in the cooling zone of FGD facility. This electrochemical protection system contains cathodic protection method and protection by coating film, and remote monitoring-control system.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.335-339
• /
• 2003

The estimation of seawater intrusion into deep aquifers has been becoming an important subject in terms of site characterization for geological disposal of radioactive waste. Conventional direct-current resistivity methods have been used for ground water explorations and recently have been applied to environmental problems. However, electromagnetic methods are more practical and useful for such a deep investigation. We consider audio-frequency magnetotelluric (AMT) and surface-to-borehole electromagnetic (EM) tomography methods as promising tools for the investigation of deep aquifer. These methods were tested in the Hasunuma area, Chiba Prefecture, Japan. Although the study area is in an urban area, high-quality AMT data were acquired, which was mainly accomplished by night-time data recording and remote-reference data processing. One-dimensional inversion results of the AMT data revealed two extremely conductive zones, which is consistent with the electrical conductivity profile of pore water in core samples. It can be interpreted as the seawater intrusions into both zones. However, the chemical analysis of the groundwater sampled in the deep zone suggests that this groundwater must be fossil seawater that had been confined during sedimentation processes. In addition, the permeability coefficient of the deep layer is very low. Thus the deep conductive zone corresponds to the fossil seawater regarded as being difficult to flow.

• Economic and Environmental Geology
• /
• v.40 no.3 s.184
• /
• pp.307-318
• /
• 2007

The occurrence of geothermal water has high correlates highly with fossil geothermal system. A fuzzy logic based data integration is applied for geothermal potential mapping in the Southern Gyeongsang Basin which is distributed in the regional fossil geothermal system. Several data sets are related with the origin and distribution of fossil geothermal system, such as the geological map, the density of lineaments, the aerial survey map of magnetic intensity, the map of hydrothermal alteration, the distribution density of hydrothermal mines, which were collected as thematic maps for the integration. Fuzzy membership functions for all thematic maps were compared to the locations of the spa hot springs, which were used as ground-truth control points. After integrating all thematic maps, the results of gamma operator (${\gamma}=0.1$) was showed the highest success rate, and new geothermal potential zone is prospected in some area.

• Journal of Environmental Science International
• /
• v.11 no.5
• /
• pp.455-461
• /
• 2002

Polycyclic aromatic hydrocarbons(PAHs) are ubiquitous contaminants in coastal marine environment. PAHs enter estuarine and nearshore marine environment via several routes such as combustion of fossil fuels, domestic and industrial effluents and oil spills. In August of 1997, mussels(Mytilus edulis) were collected at 6 sites near Kori nuclear power plant in order to analyze the PAH content by HPLC with uv/vis detection. Unfortunately, I could not find any living oysters in which I firstly intended to measure the PAH content in the study area. NPTHL and ANCPL were the major dominant PAH compounds in mussels living in the intertidal zone of Kori, Korea, and DahA, BbF, BaP were the next dominant PAH group in mussels in the study area. The mean concentrations of 15 PAH in mussels ranged from 3.2 to 1,680 ppb(mean 105$\pm$60.5 ppb). Compared with other studies world over, the concentrations of carcinogenic PAHs were relatively low in mussels in the study area, even though total PAH content was rather high. According to N/P(Naphthalene/Phenanthrene) ratio(147) and the ratio of 2∼3 ring to 3∼5 ring PAHs(58∼90 %) in mussels in the study area, I expect that the major source of PAHs in this study area is rather fresh petroleum-derived. This study presents preliminary data for the PAH levels in mussels from the intertidal zone of Kori, and the data will hopefully be utilized for the assessment of oil pollution in the East Sea, Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.1
• /
• pp.47-58
• /
• 1999

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous contaminants in coastal marine environment. PAHs enter estuarine and nearshore marine environment via several routes such as combustion of fossil fuels, domestic and industrial effluents and oil spills. In August of 1997, sediment and mussels (Mytilus edulis) were collected at 6 sites near Kori nuclear power plant in order to analyze the PAH content by HPLC with uv/vis detection. The concentrations of 15 PAH in sediment ranged from < 1 to 5,900 ppb ( mean 173.5$\pm$99.7 ppb), and in mussels, from < 0.5 to 4,125 ppb (mean 105$\pm$60.5 ppb). Compared with other studies world over, the concentrations of carcinogenic PAHs were relatively low in both sediment and mussels from the intertidal zone of Kori. This study presents preliminary data for the PAH levels in sediment and mussels from the intertidal zone of Kori, and the data will hopefully be utilized for the assessment of oil pollution in the Southeast East Sea, Korea (especially for the PAHs).

• Journal of Welding and Joining
• /
• v.16 no.1
• /
• pp.70-76
• /
• 1998

Most fossil power plants and many critical components will be approaching the end of their nominal design life. At the same time, utilities are finding it economically attractive to extend the use of these plants for several more years, Especially Main steam pipe that operated under high temperature and pressure, often under the more severe operating conditions associated with cycling duty, is most important pipe system and critical component in fossil power plant. To extend the viability of older pipe system and to improve the operation and maintenance reliability, some technologies of precise diagnosis and life management have evolved out of the necessity. The purpose of this study is to descrive the related technologies and show the example of one power plants. The purpose of this study is to descrive the related technologies and show the example of one power plants. The stress analysis was done using ANSYS FEM Code. The branch area from main steam to turbine was the high stressed zone. To evaluate the degradation of the pipe material, replica, visual check, magnetic test, hardness test were done at the welding spot. The degradation level of welding point was E/F, so the remaining life of the welded area was about 0-25%.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1556-1571
• /
• 1993

Nitrogen oxides ($NO_x$) are air pollutants which are generated from the combustion of fossil fuels. Stage combustion is an effective method to reduce $NO_x$ emissions. The effects of $NO_x$ reduction by stage combustion in a pilot scale combustor(6.6kW) have been investigated using propane gas flames laden with NH$_{3}$ as Fuel-N. The results in this study are follows; (1) $NO_x$ emissions are dependent on the reducing environment of fuel-rich zone regardless of total air ratio. The maximum $NO_x$ reduction is at the stoichiometric ratio of 0.8 to 0.9 in the reducing zone. (2) $NO_x$ reduction is maximum when burnout air is injected at the point where the oxygen in reducing zone is almost consumed. (3) $NO_x$ reduction is dependent upon the temperature of reducing zone with best effect above 950.deg. C in the reducing zone. (4) The fuel stage combustion is more effective to reduce $NO_x$ formation in the wide range of stoichiometric ratio than two stage combustion. (5) The results of this study could be utilized mainly in a design strategy for low $NO_x$ emission from the combustion of high fuel-nitrogen in energy sources ratio than as an indication of the absolute levels of $NO_x$ which can be achieved by stage combustion techniques in large scale facilities.

• Economic and Environmental Geology
• /
• v.45 no.4
• /
• pp.407-429
• /
• 2012

There has been much debates on the geologic age of the sediments of the Domi Basin, since age results varied after research methods and fossil groups. This study carried out palynological analysis and seismic interpretation to establish a stratigraphy and environmental reconstruction mainly based on fossil dinoflagellates and Seismic data from the Domi-1 and Sora-1 wells. The dinocyst assemblages found enabled zonation of the well sediment sequence resulting in 4 ecozones. Index fossils among dinocysts and palynomorphic substances indicate geologic age of the well ranges from Eocene to Pleistocene, and paleoenvironment varies from freshwater to inner-neritic marine. The fossil association also suggests strong relationship to Japanese Tertiary basins in Kyushu area in terms of stratigraphy and basin developmental history.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.2
• /
• pp.220-228
• /
• 2008

Toluene adsorption characteristics in the adsorption bed packed with activated carbon fiber (ACF) were studied. Experimental apparatus is composed of VOC generation equipment, adsorption bed, and analytical instrument. Breakthrough characteristics were investigated with length of the adsorption bed which consisted of 3 or 5 sheets of the ACF and flow rate when toluene concentration are 400 ppm and 800 ppm respectively. When mass transfer zone (MTZ) comes out of the adsorption bed, toluene concentration is increased sharply and reached plateau region by saturation. Experimental results are compared with semi-empirical gas adsorption model proposed by Yoon and Nelson. In order to investigate the movement of the MTZ with adsorption time in the adsorption bed packed with ACFs, weight increment of each ACF was measured with the location of ACF at each run. When the weight increment of ACF by toluene adsorption which located at the exit of the bed reaches about 20%, toluene started to be detected.