• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.126-138
• /
• 2017

This study was conducted to investigate the potential of chicken feather (CF), which is a by-product in poultry industry, as a raw material of wood adhesives. For the purpose, adhesive resins were formulated with NaOH- and $H_2SO_4$-hydrolyzed CF as well as crosslinkers, and then the properties and water resistance of the adhesive resins against hot water were measured. CF was made of mainly keratin-type protein, and no or very low content of heavy metals was detected. Hydrolysis rate of CF increased as NaOH concentration in hydrolysis solutions increased. However, in order to minimize the loss of adhesive property of protein itself by the severe hydrolysis of CF and to seek its proper hydrolysis conditions, NaOH concentrations in hydrolysis solution determined to adjust to 5%, 7.5% and 10%. In the NaOH-hydrolyzed CF, $H_2SO_4$-hydrolyzed CF as a hardener and crosslinker were added to formulate CF-based adhesive resins. Solid content of the resins ranged from 28.3% to 44.8% depending on hydrolysis conditions and type of crosslinker. Viscosity of the resins at $25^{\circ}C$ was very high. However, when the temperature of the resins was increased to $50^{\circ}C$, the viscosity decreased greatly and thus the resins could be applied as a sprayable resin. Retention rate measured to evaluate the water resistance of adhesive resins was the highest in the cured resin formulated with 5% NaOH-hydrolyzed CF and 5% $H_2SO_4$-hydrolyzed CF of 10% based on the solid weight as a hardener. Retention rate depending on crosslinkers added into adhesive resins was the highest phenol-formaldehyde (PF) followed by melamine-urea-formaldehyde (MUF) and formalin. The retention rate of CF-based adhesives formulated with 5% NaOH-hydrolyzed CF, PF and $H_2SO_4$-hydrolyzed CF of 10% and over did not differ statistically from that of commercial MUF resins. All of CF-based adhesives formulated with PF as a crosslinker and one with 5% NaOH-hydrolyzed CF of 55%, 5% $H_2SO_4$-hydrolyzed CF of 15%, and MUF of 30% on the basis of solid weight could be substituted for commercial urea-formaldehyde resins, From the results, CF can be used as a raw material of wood adhesives if hydrolyzed in proper conditions.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.1
• /
• pp.27-40
• /
• 2014

The functions of urban open space, which embraces community revitalization, are diverse. It is the means of public healthcare, learning centers for children, hub of arts and cultural programs, as well as promoter of urban tourism. However, in-depth discourse and research on the topic of urban open spaces has been limited so far. Hence, this study aims to investigate the motivations and satisfaction of visitation based on four representative waterfront open space in Seoul; Cheongyecheon Waterfront, Seoul Forest Park, Seonyudo Park and Banpo Hangang Park. The methods of study are literature review, observation investigation, and questionnaire survey. The findings are analyzed through the Exploratory Factor Analysis, Reliability Analysis, ANOVA Analysis and Regression Analysis by SPSS 18.0. The results of the study are as follows. First, urban waterfront open spaces in Seoul has 5 factors of visitor motivation; community amenity, nature access, cultural and educational assets, aesthetic enjoyment, and lastly means of escape. Second, factors of recognizing urban waterfront open spaces as community amenity and nature access indicate meaningful differences in visitor's perception by spatial characteristics. Third, distances between the destination and the visitor's residence influence significantly their perceived motivation. Close-range visitors perceived nature access as a principal factor, whilst medium to long-range visitors perceived visitation for aesthetic purposes more importantly. Lastly, the will to escape was shown as the influential factor in visitor satisfaction. Visiting open spaces for the enjoyment of nature and aesthetic purposes were factors that also closely relate to visitor satisfaction. In addition, it was found that there are different visitor motivations that influence visitor satisfaction in accordance with the spatial characteristics of each open space. In summary, it can be said that urban waterfront open space is a hybrid space connected to various types of urban contents beyond daily experiences. It was found that several visitor motivations including community development, design aesthetics, education and culture, entertainment, enjoyment of natural landscape, and relaxation, affect the overall satisfaction of the visiting experience. It is anticipated that the results of the study will be used by the local government in setting up strategies for the creation and management of successful urban waterfront open space, and for those involved in planning and design act as a starting point for spatial programming and amenities arrangement in accordance to the city's tourism and urban marketing approach.

• The Journal of the Korea Contents Association
• /
• v.17 no.12
• /
• pp.461-472
• /
• 2017

The purpose of this study is to analyze the current status and condition of children's playgrounds in K which parents recognize as in Gyeonggi-do and provide basic data for the qualitative environment for daily outdoor play of young Children. To do so, a survey of 269 parents living in Gyeonggi-do was conducted and reconstructed based on the advanced research related to outdoor play. Also it was evaluated and revised after consultation with 3 children education specialists. The repossessed questionaries were frequency-analyzed with SPSS 20.0 program. The result of the analysis on outdoor playgrounds is in the following. First of all, it was analyzed that parents required 1 or 2 hours for their children to play outdoors in a type of "forest playgrounds." Moreover, they said that it was really important for the children to feel "interesting and funny" during the outdoor play, and they recognized that the play would be helpful for the children's socialization. However, they felt that a risk factor of the outdoor play was "a vehicle risk in streets." Secondly, the study suggested that there were outdoor playgrounds around parents' houses, and a type of the outdoor play was "a playground installed in the apartment complex." Furthermore, most of the parents weren't satisfied with the outdoor play because the apartment neglected the management of the playgrounds, and there were no playing facilities that were good enough to derive children's curiosity and adventurous spirit. The result also showed that most of the children played outdoors with "their mothers," and they participated in indoor activities, especially playing a game or watching TV rather than outdoor activities after attending a children educational institute. Lastly, when it comes to areas of outdoor play to be improved, it was necessary to "expand playgrounds that children can use for each season," build "safe playgrounds" for a type of the outdoor play," provide "playing spaces" for a spatial type, and "control vehicles around the playgrounds and deal with dangerous things" to prevent safety accidents. The result can expand the understanding of outdoor play for Young Children and offer discussions about the relevant organizations and studies.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.48-59
• /
• 2018

This study was conducted to suggest the effective management and recycling processes of coffee waste, which can be easily obtained from coffee shops and coffee-related products industries. Prior to the fabrication of pellets, the potential of coffee waste as a raw material of pellet was investigated through the examination of its chemical compositions and fuel characteristics. Major gradient included in coffee waste was holocellulose, followed by fat/oil and protein. Coffee waste contained a small quantity of ash (0.7%), such as calcium, sodium, potassium and magnesium. Interestingly, coffee waste was easily dried probably due to its porous structure. Pellets fabricated with coffee waste and larch sawdust showed good fuel characteristics, such as moisture content, ash content, density and durability. The pellets exceed greatly the minimum requirements of $1^{st}$-grade wood pellet standard designated by National Institute of Forest Science (NIFOS). Particularly, the high calorific value of coffee waste showed the potential as a raw material of pellet. However, owing to high nitrogen and sulfur contents, coffee waste is like to be used as a raw material of wood pellet for combined heat and power plants equipped with a reduction system of $NO_x$ and $SO_x$ gases. On the other hand, 91 wt% larch sawdust and 9 wt% coffee waste are required to fabricate the $1^{st}$-grade wood pellets designated by NIFOS. Pellets fabricated with the conditions are estimated to have nitrogen content of 0.298% and sulfur content of 0.03%. Lastly, if amounts of coffee waste and sawdust in the production of wood pellets are adequately adjusted according to its purchasing price, the manufacturing cost of pellet can effectively be reduced. In addition, it is expected tp prepare the effective recycling process of waste and to relieve the environmental burden with the reduction of waste from the commercialization of coffee waste/larch pellets.

• Korean Journal of Environment and Ecology
• /
• v.23 no.2
• /
• pp.177-186
• /
• 2009

In the flora of the whole area of Jakeundang at Byeonsanbando National Park, a total of 105 taxa were identified including 50 families, 88 genera, 98 species, 6 varieties and 1 form. These were again divided into 31 taxa (29.5%) of woody plants and 74 taxa (70.5%) of herbaceous plants. In addition, 4 taxa of the Korea Forest Service, designated rare plants in the flora were identified to grow there including Phacelurus latifolius (Preservation priority order: No. 194), Aristolochia contorta (No. 151), Koelreuteria paniculata (No. 115), and Glehnia littoralis (No. 203). Indigofera koreana, Viola seoulensis that are on the list of Korean endemic plants were also identified and the plants approved for export were identified similarly to rare plants. In addition, among the floral region-based specific plants, the plant group belonging to class V, class IV and II didn't appear and a total of 16 taxa 3 taxa including Elymus mollis, Salsola collina and Koelreuteria paniculata in class III, and 13 taxa including Ischaemum anthephephoroides, Phacelurus latifolius, Asparagus cochinchinensis, Melandryum oldhamianum for. roseum, Calystegia soldanella, Messerschmidia sibirica, Scutellaria strigillosa and Aster spathulifolius, etc. in class I were identified. Among the naturalized plants in the surveyed sites, 6 families, 10 genera, and 10 taxa were identified to grow, such as Bromus unioloides, Phytolacca americana, Lepidium apetalum, Robinia pseudoacacia, Oenothera biennis and Xanthium canadense, etc. and the naturalization rate was analyzed to be 9.5% of all 105 taxa of vascular plants. This research analyzed the coverage ratio and importance value by dividing the community into a sand dunes and back swamp and divided the sand dune area into Vitex rotundifolia community and the back swamp into Phacelurus latifolius community. Jakeundang is designated as a sand dune plants observation area and managed by the office of Byeonsanbando National Park. To preserve this place, it is desirable to take a systematic management measure, such as a visit to this place on a subscription basis or education and publicity on sand dune plants.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.4
• /
• pp.23-34
• /
• 2017

This study focused on a planned site located in Gosangol Village in Daegu Metropolitan City that aims to build an urban agricultural park combining urban agriculture and urban park for the sustainable realization of urban agriculture. Accordingly, this study has significance in two perspectives: firstly, suggesting development strategies to be considered when building an urban agricultural park as a theme park, and secondly, presenting guidelines for spatial programs and facilities to be introduced for actual applications. The results are as follows. Firstly, building an urban agricultural park fills a role as a local community space prompted by the demand-oriented evolution of urban parks, and agricultural behaviors to be incorporated in the theme. In this context, 'building an urban agricultural space focusing on sustainability', 'constructing green space systems focusing on agricultural landscape', and 'structuring leisure spaces for communications in the community' are presented as development strategies. Secondly, key functions that an urban agricultural park should have include production and trade of agricultural products on the production side, soil preservation, resource cycling and green space provision on the environmental side, leisure and experience, community vitalization, education, and social security on the social and cultural side, and entertainment functions, ecological functions, and protective functions as urban park functionality. Thirdly, key facilities needed when building an urban agricultural park include urban agricultural facilities other than park management facilities, landscape facilities, recreational facilities, sports facilities, educational facilities, and convenient facilities, and family gardens as the key facility of the urban agricultural park should be scaled in consideration of various purposes and behaviors of their use. This study has a limitation that the subject site was limited to a specific area but has significance in that it presented a planning model for the spatial structuring of park-type urban agriculture.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.385-394
• /
• 2017

In this study, reaction mechanism and curing characteristics of adhesives formulated with NaOH- and $H_2SO_4$-hydrolyzed chicken feather (CF) and formaldehyde-based crosslinkers were investigated by FT-IR and DSC. In addition, adhesive properties and formaldehyde emission of medium-density fiberboards (MDF) applied with the adhesives were measured. CF-based adhesives having a solid content of 40% and over were very viscous at $25^{\circ}C$, but the viscosity reduced to $300{\sim}660m{\cdot}Pa{\cdot}s$ at $50^{\circ}C$. Consequently, the adhesives could be used as a sprayable resin. Through the FT-IR spectra of liquid and cured CF-based adhesives, addition reaction of methylol group and condensation reaction between the functional groups with the use of formaldehyde-based crosslinkers were identified. From the analysis of DSC, it was elucidated for CF-based adhesives to require a higher pressing temperature or longer pressing time comparing to commercial urea-formaldehyde (C-UF) resin. MDF bonded with CF-based adhesives, which was formulated with 5% NaOH-hydrolyzed CF (CF-AK-5%) and PF of formaldehyde to phenol mole ratio of 2.5 (PF-2.5), and pressed for 8 min had higher MOR and IB than those with other CF-based adhesives. MOR and IB of MDF bonded with the CF-based adhesives regardless of formulation type and pressing time were higher than those with C-UF resin. When the values compared with the minimum requirements of KS standard, IB exceeded the KS standard in all formulations and pressing time, but MOR of only MDF bonded with CF-AK-5% and PF-2.5 and pressed for 8 min satisfied the KS standard. What was worse, 24-TS of MDF bonded with all CF-based adhesives did not satisfied the KS standard. However, MOR and 24-TS can be improved by increasing the target density of MDF or the amount of wax emulsion, which is added to improve the water resistance of MDF. Importantly, the use of CF-based adhesives decreased greatly the formaldehyde emission. Based on the results, we reached the conclusion that CF-based adhesives formulated under proper conditions had a potential as a sprayable resin for the production of wood panels.

• Korean Journal of Environment and Ecology
• /
• v.27 no.6
• /
• pp.704-717
• /
• 2013

This study aims to provide basic data for management and prevention of infection damage by Oak wilt disease through mapping method of status with infected level in damaged area of Bukhansan National Park. Survey was carried out in the distributed area of oak trees with mapping unit of polygon of actual vegetation and mapped of infection ratio and infection index applying weight according to infected level. Infection ratio of oak trees in Bukhansan National Park was 58.5%, and lightly damaged ratio was 29.6%, half of the damaged ratio was 16.1%, seriously damaged ratio was 8.8% and withered ratio was 4.1%. It was serious to be infected from Beomgol ridge in Wondobong district to Hyeongjaebong in Jeongrung district. Although the infected ratio of the western part of Songchu district, Sanseong district and Gugi district centering main ridge of Bukhansan National Park was low, it of ridge and main valley was high. Infection index of hardly damaged area was 39.1% of whole area, and slightly damaged area was 41.0%, half of the damaged area was 16.1%, seriously damaged area was 3.3% and alarmed withering area was 0.4%. Infection index was high around Musugol valley in Dobong district and Jaunbong, and it of Bohyunbong of Jeongrung district and the part of Hyojari valley of Sanseong district was serious. Predicted numbers of the trees affected Oak wilt disease compared to the distributed area of oak trees was 1,585,937 trees among 2,709,147 trees of Quercus spp. 352,931 trees among the 306,161 trees of oak were infected in Woi district, the most seriously infected area and 53,141 trees among the 145,747 trees of oak was infected in Gugi district, the most slightly infected area.

• Korean journal of applied entomology
• /
• v.51 no.2
• /
• pp.171-190
• /
• 2012

The Korean Society of Applied Entomology (KSAE) celebrates its First 50 years history this year, 2011. It began in the year 1962, as the Korean Society of Plant Protection (KSPP) to discuss all aspects of plant protection including entomology and plant pathology. At that time it was one of the earliest scientific ones among agricultural societies in Korea. Before liberation from the Japanese colonial rule there were a few scientific societies for Japanese scientists only in the Korean Peninsula. It seemed that there was a single exception, in medical field, formed by and operated for Korean ethnics. Right after the liberation, Korean scientists rushed to form new scientific societies in the fields of mechanical engineering, architecture, textile, internal medicine, biology, etc. in 1945, mathematics, chemistry, metallurgy, etc. in 1946, and so on. But agricultural scientists had to wait for more time before setting up their own scientific society, Korean Agricultural Society(韓國農學會), comprising all agricultural subfields, in 1954. They had annual meetings and published their own journal every year until 1962. Then those working in the plant protection field established their own KSPP, right after their section meeting in 1962. At that time the total number of participants for KSPP were only around 50. KSPP scientists were interested in plant pathology, agricultural chemicals, weed science, or bioclimate, besides entomology. They had annual meetings once or twice a year until 1987 and published their own journal, Korean Journal of Plant Protection (KJPP), once a year at the earlier years but soon gradually increasing the frequency to four times a year later. Articles on entomology and plant pathology occupied about 40% each, but the number of oral or posters were a little bit higher on plant pathology than entomology, with the rest on nematology, agricultural chemicals, or soil microarthropods. There also had a number of symposia and special lectures. The presidentship lasted for two years and most of president served only one term, except for the first two. The current president should be $28^{th}$. In the year 1988, KSPP had to be transformed into the applied entomology society, Korean Society of Applied Entomology (KSAE), because most of plant pathologists participating left the society to set up their own one, Korean Society of Plant Pathology in 1984. Since that time the Society concentrates on entomology, basic and applied, with some notes on nematology, acarology, soil microarthropods, agricultural chemicals, etc. The Society has been hosting annual meetings at least twice a year with special lectures and symposia, from time to time, on various topics. It also hosted international symposia including binational scientific meetings twice with two different Japanese (applied entomology in 2003 and acarology in 2009) societies and the Asia-Pacific Congress of Entomology in 2005. The regular society meeting of this year, 2011, turns out to be the 43rd and this autumn non-regular meeting would be the 42nd. It has been publishing two different scientific journals, Korean Journal of Applied Entomology (KJAE) since 1988 and the Journal of Asia-Pacific Entomology (JAPE) since 1998. Both journals are published 4 times a year, with articles written in Korean or English in the first, but those in English only in the latter with cooperation from the Taiwan Entomological Society and the Malaysian Plant Protection Society since 2008. It is now enlisted as one of those SCI(science citation index) extended. The highest number of topics discussed at their annual meetings was on ecology, behavior, and host resistance. But at the annual meetings jointly with the Korean Society of Entomology, members were more interested in basic aspects, instead of applied aspects, such as physiology and molecular biology fields. Among those societies related to entomology and plant protection, plant pathology, pesticide, and applied entomology societies are almost similar in membership, but entomology and plant pathology societies are publishing more number of articles than any others. The Society is running beautifully, but there are a few points to be made for further improvement. First, the articles or posters should be correctly categorized on the journals or proceedings. It may be a good idea to ask members to give their own version of correct category for their submissions, either oral or poster or written publication. The category should be classified detailed as much as possible (one kind of example would be systematics, morphology, evolution, ecology, behavior, host preference or resistance, physiology, anatomy, chemical ecology, molecular biology, pathology, chemical control, insecticides, insecticide resistance, biocontrol, biorational control, natural enemies, agricultural pest, forest pest, medical pest, etc.) and such scheme should be given to members beforehand. The members should give one or two, first and second, choices when submitting, if they want. Then the categories might be combined or grouped during editing for optimal arrangement for journals or proceedings. Secondly the journals should carry complete content of the particular year and author index at the last issue of that year. I would also like to have other information, such as awards and awardees in handy way. I could not find any document for listing awards. Such information or article categorization may be assigned to one of the vice presidents. I would rather strongly recommend that the society should give more time and energy on archive management to keep better and more correct history records.

• Journal of Environmental Impact Assessment
• /
• v.24 no.4
• /
• pp.352-366
• /
• 2015

The purpose of this study is to offer the basic data to the habitat conservation and management by surveying and analysing the ecological characteristics such as the flora, vegetation structure and soil of Rhodotypos scandens habitat. The flora were summarized as 131 taxa including 57 families, 99 genera, 107 species, 1 subspecies, 17 varieties and 6 forms. The life forms grouped as in the follows; the megaphanerophytes(MM) were 21 taxa, 24 taxa of the microphanerophytes(M), 30 taxa of nanophanerophytes(N), 6 taxa of chamaiphytes(Ch), 20 taxa of hemicryptophytes(H), 17 taxa of geophytes(G), 12 taxa of therophytes(Th) and 1 taxa of hydrophytes(HH). The present conditions of communities were 8 types including Zelkova serrata, Quercus aliena, Ulmus parvifolia, Rhamnella frangulioides, Castanea crenata, Albizia julibrissin, Celtis sinensis and Robinia pseudoacacia. In case of the dominant species by layers, the tree layer species were Zelkova serrata, Quercus aliena, Ulmus parvifolia, Castanea crenata, Albizia julibrissin, Celtis sinensis and Robinia pseudoacacia, and the subtree layer species were Rhamnella frangulioides, Q. aliena, Z. serrata, A. julibrissin, U. parvifolia and Broussonetia kazinoki. The shrub layer species was Rhodotypos scandens. In the results of analyzing the diversity index, $H^{\prime}{_{max}}$ from 1.691 to 2.610, from 2.197 to 3.466 in H'max, from 0.646 to 0.903 in J' and from 0.097 to 0.354 in D. In the results of analysing the soil, there showed that acidity was 5.6, 0.5dS/m of electrical conductivity(EC), 59.1mg/kg of available $P_2O_5$, 49.7% of organic matter content, $0.4cmol^+/kg$ of exchangeable $K^+$, $13.5cmol^+/kg$ of exchangeable $Ca^{2+}$, $3.3cmol^+/kg$ of exchangeable $Mg^{2+}$.