• 미생물학회지
• /
• 제12권1호
• /
• pp.37-51
• /
• 1974

Three strains which accumulated large quantities of L-hlutamic acid as the chief product of metabolism in the presence of glucose and inorhanic ammonium salt under the aerobic condition sere newly isolated. These strains have the general characters as follows: Gram-positive, short fod-shaped, non-sporulating, non-motile, and facultative anaerobe. A change of cell shates was not almost observed in their life cycles and neither a phenomenon of cell-elongation nor a pleomorphism was recognized in any cases. Together with rigid stability in Gram-stain, these characters as above indicated evidences that newly isolates would belong to genus Brevibacterium clearly differentiated from genus Corynebacterium. At the same time the newly isolates, in addition to nutritional requirement of biotin and thiamine, showed the distinctive character of requirement of special amino acid such as histidine or cysteine for their considerable growth. These physiological characters including nitrates reduction, reaction on milk, and slow formation of acid from sugar also were useful in confirming that these bacteria would be Brevibacterium ammoniagenes.

• 치과방사선
• /
• 제19권1호
• /
• pp.19-22
• /
• 1989

florid osseous dysplasia(FOD)는 악골에 전반적인 방사선 불투과성을 보이는 질환으로 환자는 대개 무증상이나 만성 골수염에 이환 될 가능성이 상당히 높다. 치료로는 환자가 무증상인 경우 아무런 처치가 필요하지 않으나 구강위생을 청결히 하여 치아를 보존하여야 하며 치과 보철물 등의 장착에 장애가 될 경우나 만성 골수염에 이환 된 경우 주의 깊은 외과적 처치가 요구된다고 할 수 있다.

• 한국소음진동공학회논문집
• /
• 제16권1호
• /
• pp.3-11
• /
• 2006

This paper presents a new approach for hysteresis modeling of a magnetorheological (MR) fluid. The field-dependent hysteresis of MR fluid is investigated using the Preisach model. The commercial MR product (MRF-132LD, Lord Corporation) is employed. Its field-dependent shear stress is then obtained using a rheometer (MCR 300, Physica). In order to show the applicability of the Preisach model to the MR fluid, two significant properties; the minor loop property and the wiping-out. property are experimentally examined. Subsequently, the Preisach model for the MR fluid is identified using experimental first order descending (FOD) curves in discrete manner. The effectiveness of the identified hysteresis model is verified in the time domain by comparing the predicted field-dependent shear stress with the measured one. In addition, the hysteresis model proposed in this work is compared to Bingham model.

• 항공우주시스템공학회지
• /
• 제2권2호
• /
• pp.1-7
• /
• 2008

Recently the wind energy has been alternatively used as a renewable energy resource instead of the mostly used fossil fuel due to its lack and environmental issues. This work is to propose a structural design and analysis procedure for development of the low noise 100W class small wind turbine system which will be applicable to relatively low speed region like Korea and for the domestic use. Structural analysis including load cases, stress, deformation, buckling, vibration and fatigue life was performed using the Finite Element Method, the load spectrum analysis and the Miner rule. In order to evaluate the designed structure, the structural test was carried out and its test results were compared with the estimated results. In addition, the blade should be safe from the impact damage due to FOD(Foreign Object Damage) including the bird strike. In order to analize the bird strike penomena on the blade, MSC. Dytran was used, and the applied method Arbitrary Lagrangian-Eulerian was evalud by comparison with the previous study results.

• 한국안전학회지
• /
• 제18권2호
• /
• pp.34-39
• /
• 2003

In this paper, when CF/PEEK laminates for high efficiency space structure are subjected to FOD(Foreign Object Damage), the effects of temperature change on the impact damages(interlaminar separation and transverse crack) of CF/PEEK laminates and the relationship between residual lift and impact damages are experimentally investigated. Composite laminates used in this experiment are CF/PEEK orthotropic laminated plates, which have two-interlaces [$0^{\circ}_4/90^{\circ}_8/0^{\circ}_4$]. A steel ball launched by the air gun collides against CF/PEEK laminates to generate impact damages. And then CF/PEEK specimens with impact damages are observed by a scanning acoustic microscope under room and high temperatures. In this experimental results, various relations are experimentally observed including the delamination area vs. temperature change, the bending strength vs. impact energy and the residual bending strength vs. impact damage of CF/PEEK laminates.

• 한국자동차공학회논문집
• /
• 제2권6호
• /
• pp.66-75
• /
• 1994

In this paper, the effects of temperature change on the impact damages of CF/PEEK laminates are experimentally investigated. Composite laminates used in this experiment are CF/PEEK orthotropic laminated plates, which have two-interfaces$[0^{\circ}_4/90^{\circ}_4]_{9+} A steel ball launched by the air gun collides against CFRP laminates to generate impact damage. The delamination damages are oberved by a scanning acoustic microscope. And various relations are experimentally observed including the impact energy vs. delamination area, the specimen temperature vs. transverse crack, and the impact energy vs. residual bending strength of carbon fiber peek composite laminates subjected to FOD(Foreign Object Damage) under high temperatures.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.213-216
• /
• 2005

This paper presents force feedback control performance of a 3DOF haptic device that can be used for minimally invasive surgery (MIS). As a first step, a 3DOF electrorheological (ER) joint is designed using a spherical mechanism. And it is optimized based on the mathematical torque modeling. Subsequently, the master haptic device is manufactured by the spherical joint. In order to achieve desired force trajectories, model based compensation strategy is adopted for the ER master. Therefore, Preisach model fur the PMA-based ER fluid is identified using experimental first order descending (FOD) curves. A compensation strategy is then formulated through the model inversion to achieve desired force at the ER master. Tracking control performances for sinusoidal force trajectory are presented, and their tracking errors are evaluated.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권6호
• /
• pp.837-843
• /
• 2001

Two experiments were conducted to compare the feed intake patterns and growth performance of Meishan and Yorkshire growing pigs. Experiment 1 was carried out over a 6-wk period and used 48 barrows with equal numbers of purebred Meishan (M) and Yorkshire (Y). Pigs were allocated to four groups of 12 pigs consisting of equal numbers of M and Y. Initial BW were $36.4{\pm}0.32kg$ and $42.1{\pm}1.41kg$ for M and Y, respectively. Experiment 2 was carried out over a 5-week period and used 48 pigs consisting of equal numbers of both barrows and gilts and of crossbred Meishan$\times$Yorkshire (MY) and purebred Yorkshire (Y) animals. Pigs were allotted to 6 pens of 8 pigs, with 4 single- and 2 mixed-genotype groups (initial $BW=28.5{\pm}0.99kg$). In both experiments, pigs were given ad libitum access to a grower diet (17% crude protein, 0.9% lysine, 3365 kcal/kg ME) via feed intake recording equipment (F.I.R.E.). Pigs carried an ear-tag transponder with an unique identification which allowed the time, duration, and size of individual meals to be recorded. In Exp. 1, Y had higher ADG (721 vs 353 g, p<0.01), daily feed intake (DFI; 2.338 vs 1.363 kg, p<0.01), made more frequent visits to the feeder per day (NFV; 18.5 vs 7.7, p<0.01), had a shorter feeder occupation time per visit (FOV; 7.4 vs 12.9 min, p<0.01), and ate less feed per visit (FIV; 130 vs 177 g, p<0.01) than M pigs. Feed consumption rates (CR) were greater for Y compared to M (19.3 vs 14.8 g/min, p<0.01). Feeder occupation time per day (FOD) was longer for Y than M (114.3 vs 82.8 min/pig, p<0.01). Yorkshire pigs visited the feeder more frequently between 0800 and 1100 h. Meishan pigs showed more frequent feeder visits between 0600 and 0800 h, and between 1600 and 2100 h when feeding competition with Y was reduced. In Exp. 2, there was no effect of genotype or group composition on DFI, ADG or gain:feed ratio. Crossbred pigs (MY) made fewer feeder visits (12.6 vs 17.7, p<0.01), and had greater FIV (124 vs 98 g/visit, p<0.01), and longer FOV (8.11 vs 7.24 min/visit, p<0.01) and FOD (112 vs 100 min, p<0.05) than Y pigs. Results of this study suggest substantial genetic variation in feeding patterns as well as in growth performance.

• 디지털콘텐츠학회 논문지
• /
• 제4권2호
• /
• pp.211-221
• /
• 2003

본 논문은 중심 화소값과 인접 가해 성분값의 평균으로 축소 성분값을 산출함으로써 ZOD(Zero Order Decimation)와 FOD(First Order Decimation)의 장점을 적응적으로 반영한 디지털 문서 영상 축소 알고리즘의 성능을 분석함에 그 목적이 있다. 제안된 방법은, 슬라이딩 윈도우의 중앙에 위치되는 중심 화소를 축소 성분값의 주성분으로 선택하고, 1차 미분 연산자를 이용하여 중심 화소의 우측 및 하측 인접 화소의 기울기의 크기를 각각 계산한다. 이후, 두 기울기의 크기를 합산한 결과로 각 기울기의 크기를 나누어 우측 및 하측 인접 화소 각각의 국부 가해 가중치를 구한다. 다음으로, 각각의 국부 가해 가중치를 우측 및 하측 인접 화소값에 곱한 후에 그 결과를 합산함으로써 인접 가해 성분값을 산출한다. 이렇게 구한 인접 가해 성분값과 중심 화소값을 평균하여 축소 성분값을 구하는 과정을 입력 영상의 모든 화소들에 반복적으로 수행함으로써 축소 영상을 얻을 수 있다. 본 논문에서는 주관적인 성능과 하드웨어 복잡도 측면에서 제안된 방법과 기존의 각 방식에 대한 성능을 분석했고. 이러한 분석 결과를 토대로 개선된 디지털 문서 영상 축소 알고리즘을 개발하기 위한 바람직한 접근법에 대해 고찰했다.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.835-842
• /
• 2002

In this paper, static and fatigue bending strengths and failure mechanisms of CFRP (carbon fiber reinforced plastics) laminates having impact damages have been evaluated. Composite laminates used for this experiment are CF/EPOXY orthotropy laminated plates, which have two-interfaces $[0^0_ 4/90^0_4]_{ sym}$. A steel ball launched by the air gun collides against CFRP laminates to generate impact damages. The damage growth during bending fatigue test is observed by the scanning acoustic microscope (SAM) and also, the fracture surfaces were observed by using the SEM (scanning electron microscope). In the case of impacted-side compression, fracture is propagated from the transverse crack generated near impact point. On the other hand, fracture is developed toward the impact point from the edge of interface-B delamination in the case of impacted-side tension. Eventually, failure mechanisms have been confirmed based on the observed delamination areas and fracture surfaces.