• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.1
• /
• pp.1-12
• /
• 2015

Intrusive Vehicle Detectors have excellent detection performance compared to other types of detector, but disadvantages of high installation and maintenance costs, short life time due to greater damage to roads and paving materials. In contrast, Non-Intrusive Vehicle Detectors attached to the stationary pole have advantages because it does not damage the road surface and easy and less expensive to maintain. Despite these advantages, Non-Intrusive type detectors are still not been widely used in traffic signal control systems because of the low detection performance. In this study, a FMCW(Frequency Modulated Continuous Wave) radar Vehicle Detector was designed as an alternative detector for the signalized intersection, and the performance evaluation was presented by purpose applicability.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.939-942
• /
• 2000

본 논문에서는 차량 충돌 방지 시스템으로 많이 사용되고 있는 밀리미터파를 이용한 FMCW(Frequency Modulated Continuous Wave) 레이더의 신호 처리부를 분석 및 설계하였고, 설계한 레이더의 파라미터 값들을 이용하여 선행 차량의 거리와 속도 정보를 검출하는 신호 처리 과정을 시뮬레이션 해 보았다. 최종적으로 FMCW 레이더의 신호 처리부를 TI사의 TMS320C31 DSP을 이용하여 하드웨어로 구현하였다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.349-350
• /
• 2023

본 논문에서는 FMCW(Frequency Modulated Continuous Wave) 레이더를 사용하여 재난 상황에서 누워 있는 사람의 다양한 각도의 자세를 통해 사람의 상태를 파악하거나 위치를 추정하고자하였다. 사람의 세 가지 누운 자세 데이터를 전처리하고 이미지로 변환한 데이터를 CNN(Convolutional Neural Network) 1D 모델로 학습시켜 누운 자세를 다양한 각도에서 구별할 수 있는지 분석하여 확인하고자하였으며, 분석 결과 CNN 1D 모델은 99.27%의 정확도를 보였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.523-531
• /
• 2018

An analysis technique for detecting moving targets on a single-channel airborne frequency-modulated continuous-wave (FMCW) technology and synthetic aperture radar (SAR) image is presented. To analyze the relative velocities of moving targets, an FMCW-based signal model for stationary and moving targets was studied, and a SAR ambiguity function considering its signal model was simulated. The relative velocities of the moving targets on a reconstructed SAR image can be estimated by peak searching of the SAR ambiguity function, and the stationary and moving targets are easily distinguished when there is a large variation of the relative velocity. Analysis results of the moving targets on a reconstructed FMCW-SAR image, using practical airborne data and a SAR ambiguity process, are compared with the in situ testing in the study area.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.8
• /
• pp.632-639
• /
• 2018

This paper presents a single antenna radar sensor with a Ku-band radar transceiver IC realized by 130 nm CMOS processes. In this radar receiver, sensitivity time control using a DC offset cancellation feedback loop is employed to achieve a constant SNR, irrespective of distance. In addition, the receiver RF block has gain control to adjust high dynamic range. The RF output power is 9 dBm and the full chain gain of the Rx is 82 dB. To reduce the direct-coupled Tx signal to the Rx in a single antenna radar, a stub-tuned hybrid coupler is adopted instead of a bulky circulator. The maximum measured distance between the horn antenna and a metal plate target is 6 m.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.362-370
• /
• 2011

This paper presents a K-band radar system installed on the ground moving vehicle to detect and track a high-speed target. The presented radar is separated into three search regions to satisfy a wide area detection and a limitation of the installing space of the radar, and each region performs detecting the target independently and tracking the detected target automatically. The presented radar radiating K-band FMCW waveform acquires range and velocity information of the target at the every dwell and receiving antenna of the radar is applied the multiple baseline interferometer to extract the precise angle information of the target. 3-dimensional tracking accuracy of the radar is 0.25 m RMSE measured actually through a fire experiment of an imitation target.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.6
• /
• pp.253-258
• /
• 2021

In this paper, we developed a hardware and software platform of the real-time data logging system to verify radar FEM (Front-end Module) and signal-processing algorithms. We developed a hardware platform based on FPGA (Field Programmable Gate Array) and DSP (Digital Signal Processor) and implemented firmware software to verify the various FEMs. Moreover, we designed PC based software platform to control radar logging parameters and save radar data. The developed platform was verified using 24 GHz multiple channel FMCW (Frequency Modulated Continuous Wave) in an environment of stationary and moving targets of chamber room.

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.108-117
• /
• 2003

In this paper, two types of radar vehicle detectors compatible with currently being used ILD(Inductive Loop Detector) without any modification has been developed. With these vehicle detectors based on FMCW altimeter and Doppler speedometer techniques at 24 GHz, the length and speed of a vehicle can be detected. For signal processing part, we have used DAQ board and programmed with LabView. For compatibility with traffic information network connected with existing ILD's, traffic information has been sent to VDS by using RS-232C standard interface. This development has improved approximately 10% in accuracy in terms of the speed and length information compared with that of the installed ILD in the test field.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1243-1248
• /
• 2014

In General, LPI radar's detection probability by ES equipments is lower than that of conventional pulsed radar because of very low transmitting power and high antenna gain etc. LPI radar is a kind of RF stealth technique such as RCS reduction design. Therefore the ultimate goal of LPI radar is detection probability reduction by opponent. If one of the two, RCS value or LPI radar performance is not sufficient, own platform will be found first by opponent. In this paper, some considerations are suggested for detection probability reduction.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.517-522
• /
• 2023

Existing radars have been developed by applying RF sub-array algorithms, and recently, fully digital Multiple-Input Multiple-Output (MIMO) radar algorithms have been implemented for vehicle radars. In this paper, the radar algorithm applying the Phased MIMO method to the hardware of the RF sub-array method, which is an unsecured technology, was implemented and verified in real time. In order to secure RF sub-array Phased MIMO algorithm technology, a hardware structure for FPGA-based real-time signal processing was presented, and performance was first predicted through design and simulation. Through this, the digital signal of FPGA-based broadband MIMO FMCW radar The processing hardware was developed, and the Phased MIMO radar algorithm of the RF sub-Array method was finally implemented and verified in real time. Based on this, it is judged that it will be possible to secure and apply core technologies necessary for terahertz band radar in the future.