• Journal of Veterinary Science
• /
• v.23 no.1
• /
• pp.9.1-9.11
• /
• 2022

Background: Escherichia coli, which causes subclinical or clinical mastitis in cattle, is responsible for transmitting antimicrobial resistance via human consumption of raw milk or raw milk products. Objectives: The objective of this study was to investigate the molecular characteristics of 183 E. coli from bulk tank milk of five different dairy factories in Korea. Methods: The molecular characteristics of E. coli such as serogroup, virulence, antimicrobial resistance, and integron genes were detected using polymerase chain reaction and antimicrobial susceptibility were tested using the disk diffusion test. Results: In the distribution of phylogenetic groups, group D was the most prevalent (59.6%) and followed by group B1 (25.1%). The most predominant serogroup was O173 (15.3%), and a total of 46 different serotypes were detected. The virulence gene found most often was fimH (73.2%), and stx1, fimH, incC, fyuA, and iutA genes were significantly higher in isolates of phylogenetic group B1 compared to phylogenetic groups A, B2, and D (p < 0.05). Among 64 E. coli isolates that showed resistance to at least one antimicrobial, the highest resistance rate was observed for tetracyclines (37.5%). All 18 integron-positive E. coli carried the integron class I (int1) gene, and three different gene cassette arrangements, dfrA12+aadA2 (2 isolates), aac(6')-Ib3+aac(6')-Ib-cr+aadA4 (2 isolates), and dfrA17+aadA5 (1 isolate) were detected. Conclusions: These data suggest that the E. coli from bulk tank milk can be an indicator for dissemination of antimicrobial resistance and virulence factors via cross-contamination.

• Journal of Korean Medicine Rehabilitation
• /
• v.34 no.3
• /
• pp.107-117
• /
• 2024

The objective of this study is to report the clinical effects of applying an integrated rehabilitation protocol to four patients with traumatic cervical spinal cord injuries. The treatments applied included acupuncture, cupping and moxibustion, chuna manual therapy, functional electrical stimulation, and other physical therapies. The evaluation methods included American Spinal Injury Association Impairment Scale, functional independence measure (FIM), modified Barthel index (MBI), numeric rating scale (NRS) and other scales. All patients presented marked improvements in FIM, MBI, NRS and other scales, along with increased muscle strength in the manual muscle test. The application of our protocol resulted in clear clinical benefits and enhanced the recovery and quality of life for the patients in this study.

• Agricultural and Biosystems Engineering
• /
• v.4 no.2
• /
• pp.50-57
• /
• 2003

This study was conducted to develop software which provides automatic site-specific field data acquisition, data processing, data mapping and management for precision agriculture. The developed software supports acquisition and processing of both digital and analog data streams. The architecture was object-oriented and each component in the architecture was developed as a separate class. In precision agriculture research, the laborious task of manual ground-truth data collection will be avoided using the developed software. In addition, gathering high-density data eliminates the need for interpolation of values for un-sampled areas. This software shows good potential for expansion and compatibility for variable-rate-application (VRA). The FIM (Field Information Management) computer program provides the user with an easy-to-follow process for field information management for precision agriculture.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.165-171
• /
• 1999

An oil layer fuel absorption /desorption modeling was developed. Multi-component fuel model has showed more reasonable condition than single component model. Henry's constant which is related to solubility is the most important variable in the oil layer absorption/desorption mechanism. The oil segments close to the top of the cylinder liner have more significant contribution to the fuel absorption and desorption process than other oil segments. At the warmed-up condition, the effect of the engine speed on the precent fuel absorbed/desorbed is minimal. But at low il film temperature, percent of fuel abosrbed/desorbed is decreased with increasing the engine speed because of low value of molecular diffusion coefficient of fuel. The amount of fuel trapped in the piston crevice is from 2 to 2.3 times larger than that of fuel in the oil fim. However, fuel form oil film slowly desorbs into the combustion chamber compared with fuel from the piston crevices when the engines is cold.

• Journal of Environmental Science International
• /
• v.3 no.3
• /
• pp.263-271
• /
• 1994

A detachment of biofilm was investigated in an inverse fluidized bed biofilm reactor(IFRBR). The biofilm thickness, 5 and the bioparticle density, Pm were decreased by the increase of Reynolds number, Re and the decrease of biomass concentration, h. The correlations were expressed as $\delta$=6l.6+16.33$b_c$-0.004Re and Ppd=0.3+0.027$b_c$- 2.93x$l0^{-5}$ no by multiple linear regression analysis method. Specific substrate removal rate, q was derived by F/M ratio and biofilm thickness as q=0.44.+0.82F/M-5.Ix10$-4^{$\delta$}$. Specific biofilm detachment rate, bds was influenced by FIM ratio and Reynolds number as $b_{ds}$=-0.26+0.26F/M+ 2.17$\times$$10^{-4}$Re. Specific biofilm deachment rate in an IFBBR was higher than that in a FBRR(fluidized bed biofilm reactor) because of the friction between air bubble and the bioparticles.

• Journal of Technology Innovation
• /
• v.16 no.1
• /
• pp.191-213
• /
• 2008

This study investigates the effect of technology import and R&D investment on the value of the firm in Korea. The result shows that the technology import announcement effect of firms with a low R&D investment is higher than that of firms with a high R&D investment. The evidence suggests that technology import can substitute the existing R&D capability of the firm. In addition, the result shows that there is an optimal level of technology import and R&D investment to maximize the value of the firm. In particular, firms with a low R&D investment and a large amount of technology import experience the highest announcement effect. The study concludes that an adequate allocation of fim's capital between R&D investment and technology import is needed for firm's optimal technology strategy.

• Transactions of Materials Processing
• /
• v.20 no.3
• /
• pp.250-256
• /
• 2011

Vacuum-assisted thermoforming is one of the critical steps for the successful application of film insert molding(FIM) to parts of complex shapes. If the thickness distribution of the formed film is non-uniform, cracking, deformation, warping, and wrinkling can easily occur at the injection molding stage. In this study, the effects of processing parameters, which include the film heating time, plug depth, plug speed and vacuum delay time, on film thickness distribution were investigated. It was found that the film thickness at the part sidewall decreases with increasing the film heating time and plug depth, but the thickness at the bottom was found to exhibit the opposite behavior. The film thickness of the sidewall was observed to increase at higher plug speed and vacuum delay time of 0 ~ 0.3sec.

• The Journal of Korean Physical Therapy
• /
• v.17 no.4
• /
• pp.493-504
• /
• 2005

The purpose of this study is to determine the effect of constraint-induced movement therapy on the involved hand function and ADL in stroke patients. Five subjects with fixing unaffected arms by CIMT were assigned to the experimental patient group and the other five patients to control group without fixing unaffected arms. The function of hand for both groups were evaluated by using Jebsen-Taylor hand function test and ADL for both groups were evaluated by FIM(Functional Independence Measure) before and after task practice. In conclusion, results of this study showed that improved hand function and ADL by CIMT in stroke patients. We concluded that CIMT can improved the involved hand function and ADL in stroke patients.

• Bulletin of the Korean Space Science Society
• /
• 2004.04a
• /
• pp.52-52
• /
• 2004

지난해 9월 성공적으로 발사된 과학기술위성 1호의 주탑재체인 FIMS는 초기운용을 통해 우주궤도상에서 성공적으로 동작하고 있음을 확인하였다. 과학탑재체가 올려지게 되면, 초기에는 분광 성능과 위성 자세의 보정 등이 이루어지게 된다. 현재는 초기운영을 통한 보정이 마무리되어 주요 임무인 원자외선 영역의 전천탐사를 수행하고 있다. 앞으로 1년여에 걸쳐 은하 전 영역에 걸친 분광영상을 획득하게 된다. (중략)

• Transactions of Materials Processing
• /
• v.22 no.3
• /
• pp.171-177
• /
• 2013

Vacuum-assisted thermoforming is one of the critical steps for successful application of film insert molding (FIM) to make parts of complex shape. If the thickness distribution of the formed film is non-uniform, then cracking, deformation, warpage, and wrinkling can easily occur at the injection molding stage. In this study, the simulation of thermoforming was performed to predict the film thickness distribution, and the results were compared with experiments. Uniaxial tensile tests with a constant crosshead speed for various high temperatures were conducted to investigate the stress-strain behavior. An instance of yielding occurred at the film temperature of $90^{\circ}C$, and the film stiffness increased with increasing crosshead speed. Two types of viscoelastic models, G'Sell model, K-BKZ model, were used to describe the measured stress-strain relationship. The predicted film thickness distributions were in good agreement with the experimental results.