• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1091-1099
• /
• 2024

Fluoride-salt-cooled High-temperature Reactor (FHR) is a promising nuclear reactor technology. Among many challenges presented by the molten fluoride salts is the corrosion of salt-facing structural components. Higher moisture contents, in the FLiNaK (LiF-NaF-KF, 46.5-11.5-42 mol%) salt, aggravate intergranular corrosion and pitting for the given alloys. Therefore, several thermal dehydration tests of FLiNaK salt were performed with a batch size suitable for thermal-hydraulic experiments. Thermogravimetric Analysis (TGA) was performed for the three constituent fluoride salts individually. Preliminary thermal dehydration plans were then proposed for NaF and KF salts based on the TGA curves. However, the dehydration process may not be required for LiF since its low mass loss (<1.3 wt%). To evaluate the performance of these thermal dehydration plans, a batch-scale salt dehydration test facility was designed and constructed. The preliminary thermal dehydration plans were tested by varying the heating rates, target temperature, and holding time. The sample mass loss data showed that the high temperatures (>500 ℃) were necessary to remove a significant amount of moisture (>1 wt%) from NaF salt, while relatively low temperatures (around 300 ℃) with a long holding time (>10 h) were sufficient to remove most of the moisture from KF salt.

• Proceedings of the Korean Statistical Society Conference
• /
• 2002.11a
• /
• pp.299-304
• /
• 2002

본 연구에서는 자궁 내 태아의 발육지연이 주산기 사망률 및 이환율을 증가시키는 고위험 임신의 한 예로써, 태아 발육제한증과 관련한 비선형적인 자료를 통계적인 방법으로 접근하는데 초점을 두었다. 이에 정상태아와 발육제한증 태아를 판별하기 위한 분석을 실시함에 있어 신경망 이론 중 하나인 다층 퍼셉트론 모형으로 예측하고자 하였다.

• Journal of Energy Engineering
• /
• v.11 no.2
• /
• pp.81-89
• /
• 2002

IGCC (Integrated Coal Gasification Combined Cycle) is a technology that generates electric power using coal gasification and gasified fuel. Carbon conversion value of IGCC is higher and the influence on the environment is lower than the pulverized coal power plant. Especially, in the nations where the weight of fossil fuel for power generation is remarkably high like in Korea, IGCC stands out as an alternative plan to cope with sudden limitation for the emissions. In this paper, system design study for the commercial IGCC system which the introduction is imminent to Korea was performed. Two cases of entrained gasification process are adapted, one is FHR(full heat recovery) type IGCC system for high efficiency and the other is Quench type IGCC system for low cost. System simulations using common codes like AspenPlus were performed for each system. In the case of Quench system, system option study and sensitivity analysis of the air extraction rate was performed. Thermal performance result for the FHR system is 42.6% (HHV, Net) and for the quench system is 40% (HHV, net) when 75% air is extracted.

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1119-1126
• /
• 2002

In this paper, we propose two predictive spatial data mining based on spatial statistics and apply for predicting the forest fire hazardous area. These are conditional probability and likelihood ratio methods. In these approaches, the prediction models and estimation procedures are depending un the basic quantitative relationships of spatial data sets relevant forest fire with respect to selected the past forest fire ignition areas. To make forest fire hazardous area prediction map using the two proposed methods and evaluate the performance of prediction power, we applied a FHR (Forest Fire Hazard Rate) and a PRC (Prediction Rate Curve) respectively. In comparison of the prediction power of the two proposed prediction model, the likelihood ratio method is mort powerful than conditional probability method. The proposed model for prediction of forest fire hazardous area would be helpful to increase the efficiency of forest fire management such as prevention of forest fire occurrence and effective placement of forest fire monitoring equipment and manpower.

• The korean journal of orthodontics
• /
• v.33 no.4 s.99
• /
• pp.293-305
• /
• 2003

The pharynx have significant locations and functions because it forms a part of the unit in which respiration and deglutition are carried out. Because of the closed relationship between the pharynx and the dentofacial and craniofacial structure, many studies are carried out on this subjects. The purpose of this study were to compare the airway size including pharynx, soft palate, tongue and hyoid bone between normal and hyperdivergent skeletal pattern and to evaluate the change of those size in different age. The sample of this study were consisted of 51 subjects in normal group, 52 subjects in hyperdivergent group. Each was divided into two subgroups by age , child group(9-l2yr old) and adult group(18yr old over). The lateral cephalometric radiographs were taken and the distance, angle and ratio of the facial skeleton, pharynx, soft palate, tongue and hyoid bone were measured and evaluated statistically. The result obtained were summarized as follows : 1 SN-Mn angle, FMA, and Pal-Mn angle were significantly larger in child group than adult group, but the lower anterior facial height(LAFH) and facial height ratio(FHR) were significantly smaller in child group than adult group. Occlu-Mn angle was significantly steep in hyperdivergent group than normal, but not significantly different between child group and adult group. 2. Hyperdivergent group and child group had the stronger correlation between SN-Mn angle, FMA, Pal-Mn angle, LAFH and FHR and airway size than normal group and adult group. Hyperdivevgent child group had significant negative correlation between SN-Mn angle, FMA, Pal-Mn angle and sagittal skeletal dimension of nasopharynx and sagittal depth of nasopharyngeal lumen. Significant positive correlation were seen between LAFH and vertical measurement of airway. 3. There was no difference of the linear measurement of airway size between hyperdivergent group and normal group. 4. Adult group had smaller posterior pharyngeal wall, target nasopharyngeal depth longer nasopharyngeal height and longer pharyngeal length than child group. 5. The sagittal measurement of hyoid bone had no difference between child group and adult group. But adult group had larger vertical measurement of hyoid bone than child group.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.181-184
• /
• 2004

There are reports showing that electromagnetic fields (EMFs) emitted at non-thermal levels may be associated with biological alterations in target cells. In this study it is objected to assess the potential influences of EMFs produced by cellular phones on fetal heart rate. Non Stress Test (NST) is a widely used method of fetal monitoring and assessing fetal health and well-being. Sixty volunteers with uncomplicated term pregnancies were studied by a Spacelabs AM-67 Doppler ultrasound monitor. Fetal Heart Rate recordings were obtained while there were no Cellular Phone around for 10 minutes. Afterwards, all patients were exposed to EMFs for 10 minutes. NST was performed while they were holding the CP on stand-by mode and then on dialing mode, each for 5 minutes. The recordings were analyzed with respect to baseline heart rate, accelerations and decelerations. The Wilcoxon matched-pairs signed-ranks test was used to compare these variables. The results indicate that EMFs emitted by CP do not cause any demonstrable effects on baseline FHR, acceleration or deceleration.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.8 no.2
• /
• pp.132-139
• /
• 2008

This paper proposes a scatternet topology formation, self-healing, and self-routing path optimization algorithm based on Relative Neighborhood Graph. The performance of the algorithm using ns-2 and extensible Bluetooth simulator called blueware shows that even though RNG-FHR does not have superior performance, it is simpler and easier to implement in deploying the Ad-Hoc network in the distributed dynamic environments due to the exchange of fewer messages and the only dependency on local information. We realize that our proposed algorithm is more practicable in a reasonable size network than in a large scale.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.2
• /
• pp.99-108
• /
• 1997

Many studies on the second-order analysis of reinforced concrete columns have been dealt for symmetric sections under uniaxial loading. However, actual columns are practically subjected to hiaxial loading. In order to more accurately predict the behavior of concrete columns under biaxial loading. the interaction between bending moments of major and minor axes should be considered. In this paper, a stiffness matrix of columns under biaxial loadings was derived and a numerical method was proposed. Numerical analyses, based on the proposed method. were performed to predict behavior of concrete columns with square and rectangular sections under various loading conditions. The analytical results were compared to those using the moment magnifier method in ACI code. It was found that the ultimate strength of concrete rectangular columns, fhr some cases of' biaxial loading conditions. calculated by the moment magnifier method was larger than the values based on the proposed method and therefore. may be ovet.'stimated.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.3879-3891
• /
• 2021

A heat pipe residual heat removal system is proposed to be incorporated into the reactor driven subcritical (RDS) facility, which has been proposed by MIT Nuclear Reactor Laboratory for testing and demonstrating the Fluoride-salt-cooled High-temperature Reactor (FHR). It aims to reduce the risk of the system operation after the shutdown of the facility. One of the main components of the system is an air-cooled heat pipe heat exchanger. The alkali-metal high-temperature heat pipe was designed to meet the operation temperature and residual heat removal requirement of the facility. The heat pipe model developed in the previous work was adopted to simulate the designed heat pipe and assess the heat transport capability. 3D numerical simulation of the subcritical facility active zone was performed by the commercial CFD software STAR CCM + to investigate the operation characteristics of this proposed system. The thermal resistance network of the heat pipe was built and incorporated into the CFD model. The nominal condition, partial loss of air flow accident and partial heat pipe failure accident were simulated and analyzed. The results show that the residual heat removal system can provide sufficient cooling of the subcritical facility with a remarkable safety margin. The heat pipe can work under the recommended operation temperature range and the heat flux is below all thermal limits. The facility peak temperature is also lower than the safety limits.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.205-218
• /
• 1996

A given facial type can be considered as a syndrome in which various features are aggregated, so a single parameter is not sufficient to accurately identify a given facial type. This study was designed to identify & characterize the skeletal types that blend under the headline-'Cl III,deepbite'. Cephalograms of thirty-four untreated mixed dentition patients, selected mainly on the basis of clinical impression of Cl III with reduced lower face heights were studied. The following conclusion can be drawn. 1. Cl III malocclusion with reduced lower face height could be classified into three types. 2. Subtype 1 was identified by the following features : strong ramus, more anteriorly positioned upper molars without alveolar hypoplasia, acutely reduced Mn. plane angle. 3. Subtype 2 was characterized by a short ramus, sharply reduced postrior alveolar height, and normal Mn. plane angle. In general, this type had hypoplasia tendency in the vertical dimension. 4. In subtype 3, the AUFH occupying more percentage than ALFH was a outstanding feature. Ramal height was in normal range, alveolar hypoplasia and slightly reduced Mn. plane angle was observed. 5. The features of the subtypes were reflected in certain indices, which can be regarded as discriminative index. LAFH: if reduced, regardless of subtypes, indicates reduced lower ant. face height consistently. FHR: when this ratio is increased, it indicates subtype 1. FHI: when this ratio is in normal range, it indicates subtype 2. FPI: if reduced greatly, it indicates subtype 3.