• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.3
• /
• pp.123-129
• /
• 2014

Objectives: The aim of this study was to verify the concordance of the measurement values when the same cephalometric analysis method was used for two-dimensional (2D) cephalometric radiography and three-dimensional computed tomography (3D CT), and to identify which 3D Frankfort horizontal (FH) plane was the most concordant with FH plane used for cephalometric radiography. Materials and Methods: Reference horizontal plane was FH plane. Palatal angle and occlusal plane angle was evaluated with FH plane. Gonial angle (GA), palatal angle, upper occlusal plane angle (UOPA), mandibular plane angle (MPA), U1 to occlusal plane angle, U1 to FH plane angle, SNA and SNB were obtained on 2D cephalmetries and reconstructed 3D CT. The values measured eight angles in 2D lateral cephalometry and reconstructed 3D CT were evaluated by intraclass correlation coefficiency (ICC). It also was evaluated to identify 3D FH plane with high degree of concordance to 2D one by studying which one in four FH planes shows the highest degree of concordance with 2D FH plane. Results: ICCs of MPA (0.752), UOPA (0.745), SNA (0.798) and SNB (0.869) were high. On the other hand, ICCs of gonial angle (0.583), palatal angle (0.287), U1 to occlusal plane (0.404), U1 to FH plane (0.617) were low respectively. Additionally GA and MPA acquired from 2D were bigger than those on 3D in all 20 patients included in this study. Concordance between one UOPA from 2D and four UOPAs from 3D CT were evaluated by ICC values. Results showed no significant difference among four FH planes defined on 3D CT. Conclusion: FH plane that can be set on 3D CT does not have difference in concordance from FH plane on lateral cephalometry. However, it is desirable to define FH plane on 3D CT with two orbitales and one porion considering the reproduction of orbitale itself.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.865-875
• /
• 1998

The purpose of this study was to investigate the angle formed by the Sella-Nasion(SN) plane and Frankfort-Horizontal(FH) plane and evaluate the correlation and difference of the FH plane to other horizontal reference planes. Through this study we hope to present a basis for selecting a horizontal reference plae which can be implemented in cephalometric studies and in surgical orthodontic treatment planning. 600 subjects were chosen following a clinical examination md lateral cephlometric X-rays were taken. According to cephalometric analysis the subjects were classified into 3 groups , Skeletal Class I malocclusion or normal occlusion group(male 50, female 50), Skeletal Class II malocclusion group(male 50, female 65) and Skeletal Class III malocclusion group(male 50, female 50). The results were as follows. 1. The angle formed by the SN plane and FH plane showed no difference among the malocclusion groups, but there was a significant sex difference. For males the angle measured was $7.47^{\circ}{\pm}2.40^{\circ}$ whereas for females it was $8.93^{\circ}{\pm}2.72^{\circ}$. 2. The angle formed by the SN plane or FH plane and Mandibular plane was higher in females for all malocclusion groups. This angle in the Skeletal Class I malocclusion group was lower than in the other two groups. 3. There was no difference among the sexes or malocclusion groups considering the angle formed by the FH plane and Palatal plane. 4. The genial angle in the Skeletal Class III malocclusion group was higher than in the Skeletal Class I and Class II malocclusion groups in both sexes.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.39 no.2
• /
• pp.71-76
• /
• 2013

Objectives: In three-dimensional computed tomography (3D-CT), the cant is evaluated by measuring the distance between the reference plane (or line) and the tooth. The purpose of this study was to determine the horizontal skeletal reference plane that showed the greatest correlation with clinical evaluation. Materials and Methods: The subjects were 15 patients who closed their eyes during the CT image taking process. The menton points of all patients deviated by more than 3 mm. In the first evaluation, clinical cant was measured. The distance from the inner canthus to the ipsilateral canine tip and the distance from the eyelid to the ipsilateral first molar were obtained. The distance between the left and right sides was also measured. In the second evaluation, skeletal cant was measured. Six reference planes and one line were used for the evaluation of occlusal cant: 1) FH plane R: Or.R - Or.L - Po.R; 2) FH plane L: Or.R - Or.L - Po.L; 3) F. Ovale plane R: Rt.F.Ovale - Lt.F.Ovale - Or.R; 4) F. Ovale plane L: Rt.F.Ovale - Lt.F.Ovale - Or.L; 5) FZS plane R: Rt.FZS - Lt.FZS - Po.R; 6) FZS plane R: Rt.FZS - Lt.FZS - Po.L, and; 7) FZS line: Rt.FZS - Lt.FZS. Results: The clinical and skeletal cants were compared using linear regression analysis. The FH plane R, FH plane L, and FZS line showed the highest correlation (P<0.05). Conclusion: The FH plane R and FH plane L are the most appropriate horizontal reference plane in evaluation of occlusal cant on 3D-CT.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.251-265
• /
• 1999

Various types of horizontal reference planes are used for diagnosis, treatment planning and evaluation of treatment results. But these reference Planes lack accuracy and repro-ducibility, and are mainly for Caucasian. Unlike the adult patients who have completed growth, the horizontal reference planes for growing children may change continuously during growth. Therefore this must be considered in selecting the horizontal reference plane. The purpose of this study was to Investigate the angle formed by the Sella-Nasion(SN) plane and Frankfort-Horizontal(FH) plane and evaluate the angle formed by FH plane and other horizontal reference planes in relation to different skeletal maturity and malocclusion types. 540 subjects with no orthodontic treatment history were chosen, and hand -wrist X-rays and lateral cephalometric X-rays were taken. According to SMA(Skeletal Maturity Assessment) of hand-wrist X-rays, the subjects were classified into 3 skeletal maturity groups : SMI 1-4 for group A, SMI 5-7 for group B and SMI 8-11 for group C. A second classification was made according to cephalometric analysis of lateral cephalograms. The subjects were classified into 3 malocclusion groups : Skeletal Class I, II and III malocclusion group. 10 measurements were evaluated. The results were as follows. 1. The angle formed by the SN plane and FH plane showed no difference among skeletal maturity groups, malocclusion groups, and between .sexes. 2. The angles formed by the SN plane and FH plane were $8.27^{\circ}{\pm}2.31^{\circ}$ for males and $8.59^{\circ}{\pm}2.24^{\circ}$ for females. The average value for females and males was $8.42^{\circ}{\pm}2.28^{\circ}$. 3. The angle formed by the FH plane and palatal plane was almost constant showing no difference among skeletal maturity groups, malocclusion groups, and between sexes($1.09^{\circ}{\pm}3.21^{\circ}$).

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.20 no.1
• /
• pp.19-27
• /
• 1990

The primary objective of this study was to analyze the hard and soft tissue profile and comparison of the both sexes in Korean adults using roentgenocephalometry. The subjects were 122 males and 116 females from 18 to 22 years of age selected on the basis of their excellent occlusion and harmonious profile. It was an investigation about the interrelationships in the angles which consisted of Frankfort horizontal plane (FH plane), Sella Nasion plane (SN plane), Nasal floor plane (NF plane) and Mandibular plane (Md plane) as reference planes, and of the axial inclinations of the upper anterior tooth to Nasal floor plane (NF Plane) and of the lower anterior tooth to Mandibular plane (Md Plane). Among the 14 categories estabilishied on the soft tissue land marks, the 6 categories were studied for the relationship to Frankfort horizontal plane (FH Plane), and the 8 categories were studied for the soft tissue contour. The results were as follows: 1. Among 8 measured angles in the hard tissue, the angle of FH-Md, NF-Md and SN-Md were greater in females than in males. 2. The axial inclinations of the anterior teeth to NF Plane and Md plane were slightly greater in males than In females. 3. Among 14 measured angles in the soft tissue, the angles of G-Sn-P and E-Pog-Sn were greater in males, and FH-G-Sn, GㆍSn-Sn. Pog and Pog-Sn-P were greater in females. 4. In males, the variability of measured values in both lips region were high.

• The korean journal of orthodontics
• /
• v.35 no.6 s.113
• /
• pp.475-484
• /
• 2005

This study was performed to investigate the reproducibility of the horizontal and midsagittal planes, and to suggest a stable coordinate system for three-dimensional (3D) cephalometric analysis. Eighteen CT scans were taken and the coordinate system was established using 7 reference points marked by a volume model, with no more than 4 points on the same plane. The 3D landmarks were selected on V works (Cybermed Inc., Seoul, Korea), then exported to V surgery (Cybermed Inc., Seoul, Korea) to calculate the coordinate values. All the landmarks were taken twice with a lapse of 2 weeks. The horizontal and midsagittal planes were constructed and its reproducibility was evaluated. There was no significant difference in the reproducibility of the horizontal reference planes, But, FH planes were more reproducible than other horizontal planes. FH planes showed no difference between the planes constructed with 3 out of 4 points. The angle of intersection made by 2 FH planes, composed of both Po and one Or showed less than $1^{\circ}$ difference. This was identical when 2 FH planes were composed of both Or and one Po. But, the latter cases showed a significantly smaller error. The reproducibility of the midsagittal plane was reliable with an error range of 0.61 to $1.93^{\circ}$ except for 5 establishments (FMS-Nc, Na-Rh, Na-ANS, Rh-ANS, and FR-PNS). The 3D coordinate system may be constructed with 3 planes; the horizontal plane constructed by both Po and right Or; the midsagittal plane perpendicular to the horizontal plane, including the midpoint of the Foramen Spinosum and Nc; and the coronal plane perpendicular to the horizontal and midsagittal planes, including point clinoidale, or sella, or PNS.

• The korean journal of orthodontics
• /
• v.37 no.4
• /
• pp.260-271
• /
• 2007

The purpose of this study was to evaluate the relationships between the occlusal plane angle and craniofacial skeletal pattern in relation to anterior overbite. Methods: Lateral cephalograms of 90 adults with skeletal class III malocclusions were traced and measured to analyze skeletal factors and occlusal plane angles. In terms of anterior overbite, all patients were classified into 3 subgroups of positive overbite, edgebite, and negative overbite groups. All measurements were evaluated statistically by ANOVA and Duncan's Post Hoc, and correlation coefficients were evaluated among measurements. Results: In this study, some skeletal measurements (saddle angle, articular angle, Y axis, AFH, SN-FH, SN-Mn, FH-Mn) showed a significant difference among the 3 groups in relation to overbite changes. Correlation coefficient showed that PFH/AFH, SN-Mn, Mx-Mn, and FH-Mn showed a significant difference with FH-Occ, Mx-Occ, and Mn-Occ. Regression analysis showed that Mx-Mn had a determination coefficient of 0.714, 0.560, and 0.677 in relation to FH-Occ, Mx-Occ, and Mn-Occ, respectively. Conclusion: This study suggests that consideration of the occlusal plane in relation to the maxillomandibular vertical skeletal state enable the establishment of a more predictable orthognathic surgery result.

• The korean journal of orthodontics
• /
• v.22 no.4 s.39
• /
• pp.869-880
• /
• 1992

The purpose of this study was to evaluate the difference and relationship between the slope of articular eminence and the inclination of upper and lower incisor teeth, which are related to the functional stability of occlusion in mandibular protrusion, according to Ricketts' facial types, by the use of lateral cephalogram and SAM2 articulator in 68-adult normal occlusion without tooth missing, orthodontic treatment and occlusal equilibration. The results of this study were as follows : 1 . The angle of articular eminence slope to occlusal plane in brachyfacial type was steeper than that in dolichofacial type, but the angle of articular eminence slope to SN plane and FH plane was not different between facial types. 2. The upper incisor axis in dolichofacial type was steeper than that in brachyfacial type, but lingual surface slope of upper incisor was not different between facial types. 3. In all samples there was a positive correlation between the angle of articular eminence slope and the lingual surface slope of upper incisor to SN plane and FH plane, and in mesofacial type there was a positive correlation between the angle of articular eminence slope and the lingual surface slope of upper incisor to SN plane, FH plane and occlusal plane, and in brachyfacial type there was a positive correlation between the angle of articular eminence slope and the lingual surface slope of upper incisor to occlusal plane. 4. In all samples there was a positive correlation between the angle of articular eminence slope and the angle of Dc-Gn to SN plane, and in mesofacial type there was a positive correlation between the angle of articular eminence slope and the angle of Dc-Gn to occlusal plane, and in brachyfacial type there was a positive correlation between the angle of articular eminence slope and the angle of Dc-Gn to SN plane and FH plane. 5. In all samples there was a positive correlation between the angle of Dc-Gn and the lingual surface slope of upper incisor to SN plane and FH plane, and in mesofacial type there was a positive correlation between the angle of Dc-Gn and the lingual surface slope of upper incisor to SN plane. 6. In all samples and facial types there was a negative correlation between MP to 1 axis and condylar incisal angle.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.4
• /
• pp.346-351
• /
• 2011

Purpose: The purpose of this study was to measure the angular differences between the horizontal reference planes on the CBCT generated PA cephalogram and the modified interpupillary plane, which was usually used in the clinical examination, and to evaluate the validity of the horizontal reference planes. Methods: The CBCT generated PA cephalogram was used to measure the angles between the FH, Lo and IP planes. The subjects consisted of 42 patients with facial asymmetry (males: 21, females: 21, mean-age: 21.6 years). The control groups were also assessed (males: 10, females: 10, mean-age: 23.8 years). The distance of the interpupil was measured on the soft-tissue volume rendered image. The angular differences were statistically analyzed using the $Mann-Whitney$ $U$ $test$ for inter-group comparisons and the $Friedman$ $test$ for intra-group comparisions. Results: The angle between the FH plane and IP plane (the angle of the FH-IP line) showed a statistically significant difference between the two groups ($p$ <0.05). There was no statistical differences between each angle (angle of the FH-IP line, angle of the FH-Lo line, angle of the Lo-IP line) on the intra-group comparision ($p$ >0.05). Conclusion: The angle between the Lo line and IP line (angle of the Lo-IP line) showed no statistically significant difference in both the control and asymmetry groups. Therefore, the Lo line could be used as a horizontal reference plane in CBCT generated PA cephalograms.

• Journal of Korean Dental Science
• /
• v.14 no.1
• /
• pp.26-31
• /
• 2021

Purpose: This study aimed to find a correlation between the occlusal plane and two reference planes that are frequently used in semi-adjustable articulators. Materials and Methods: Sixty-two males and fifty females with normal articulation were recruited and the lateral cephalograms of these patients were taken. The angles between the Frankfort horizontal (FH) and the occlusal planes, the angles between the gnathologic and the occlusal planes, and the angles between the FH and gnathologic planes were measured on the lateral cephalograms. Result: The mean angles between the FH and the occlusal planes was 8.29°±3.62°, with 8.88°±3.09° and 7.63°±4.10° for male and female patients, respectively. The mean angles between the gnathologic and the occlusal planes was 2.77°±3.62°, and the angle between the FH and the gnathologic planes was 5.52°±3.62°. No significant differences were found in the measured angles between the male and female patients (P>0.05). Conclusion: Different guidance angles may be applied to articulators for prosthodontic restoration, depending on the reference planes that the articulators use.