• Journal of Information Processing Systems
• /
• v.11 no.4
• /
• pp.583-600
• /
• 2015

Generally, the wireless network provides priority to handover calls instead of new calls to maintain its quality of service (QoS). Because of this QoS provisioning, a call admission control (CAC) scheme is essential for the suitable management of limited radio resources of wireless networks to uphold different factors, such as new call blocking probability, handover call dropping probability, channel utilization, etc. Designing an optimal CAC scheme is still a challenging task due to having a number of considerable factors, such as new call blocking probability, handover call dropping probability, channel utilization, traffic rate, etc. Among existing CAC schemes such as, fixed guard band (FGB), fractional guard channel (FGC), limited fractional channel (LFC), and Uniform Fractional Channel (UFC), the LFC scheme is optimal considering the new call blocking and handover call dropping probability. However, this scheme does not consider channel utilization. In this paper, a CAC scheme, which is termed by a uniform fractional band (UFB) to overcome the limitations of existing schemes, is proposed. This scheme is oriented by priority and non-priority guard channels with a set of fractional channels instead of fractionizing the total channels like FGC and UFC schemes. These fractional channels in the UFB scheme accept new calls with a predefined uniform acceptance factor and assist the network in utilizing more channels. The mathematical models, operational benefits, and the limitations of existing CAC schemes are also discussed. Subsequently, we prepared a comparative study between the existing and proposed scheme in terms of the aforementioned QoS related factors. The numerical results we have obtained so far show that the proposed UFB scheme is an optimal CAC scheme in terms of QoS and resource utilization as compared to the existing schemes.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.177-181
• /
• 2009

Compositional gradient CrNx coatings were fabricated using arc ion plating in Ar/$N_2$ gaseous mixture by gradually increasing $N_2$ flux rate from 0 to 120 SCCM. The effect of negative substrate bias on the film microstructure and mechanical properties were systematically investigated with XRD, GDOES, and SEM. The results show that substrate bias has an important influence on film growth and microstructure of gradient CrNx coatings. The coatings mainly crystallized in the mixture of hexagonal $Cr_{2}N$ and fcc CrN phases. By increasing substrate bias, film microstructure evolved from an apparent columnar structure to an equiaxed one. With increasing substrate bias, deposition rate first increased, and then decreased. The maximum of deposition rate was 15 nm/min obtained at a bias of -50V.

• The Korean Journal of Malacology
• /
• v.31 no.4
• /
• pp.273-277
• /
• 2015

This study was conducted to provide the reproductive biological information and basic data on the artificial sex control of Haliotis discus hannai. The morphological sex differentiation process of H. discus hannai could be classified into following five phases: 1) formation of gonad outer membrane (FGOM) (${\leq}SL\;10.0{\pm}1.0mm$), 2) primordial germ cells (PGCs) appearance in the connective tissue between intestine and hepatopancreas (PAC), and formation of gonadal cavity (FGC) (SL $15.0{\pm}2.0mm$), 3) PGCs appearance in the epithelial layer of gonadal cavity (PAG) (SL $18.0{\pm}2.0mm$), 4) formation of gametogenic follicle and appearance of early oocytes and spermatogonia (FGOC) (SL $21.0{\pm}2.0mm$), 5) morphological sex differentiation (MSD) (${\geq}SL\;23.0{\pm}2.0mm$). From histological analysis sex differentiation rate in SL 24.1-25.0 mm of H. discus hannai was 90.0% and sex ratio (female : male) was 1:0.8.

• Smart Structures and Systems
• /
• v.13 no.1
• /
• pp.137-154
• /
• 2014

Servohydraulic shaking tables are being increasingly used in the field of earthquake engineering. They play a critical role in the advancement of the research state and remain one of the valuable tools for seismic testing. Recently, the National Earthquake Engineering Research Center, CGS, has acquired a 6.1m x 6.1 m shaking table system which has a six degree-of-freedom testing capability. The maximum specimen mass that can be tested on the shaking table is 60 t. This facility is designed specially for testing a complete civil engineering structures, substructures and structural elements up to collapse or ultimate limit states. It can also be used for qualification testing of industrial equipments. The current paper presents the main findings of the experimental shake-down characterization testing of the CGS shaking table. The test program carried out in this study included random white noise and harmonic tests. These tests were performed along each of the six degrees of freedom, three translations and three rotations. This investigation provides fundamental parameters that are required and essential while elaborating a realistic model of the CGS shaking table. Also presented in this paper, is the numerical model of the shaking table that was established and validated.

• Earthquakes and Structures
• /
• v.6 no.5
• /
• pp.539-560
• /
• 2014

Shaking tables are devices for testing structures or structural components models with a wide range of synthetic ground motions or real recorded earthquakes. They are essential tools in earthquake engineering research since they simulate the effects of the true inertial forces on the test specimens. The destructive earthquakes that occurred at the north part of Algeria during the period of 1954-2003 resulted in an initiative from the Algerian authorities for the construction of a shaking simulator at the National Earthquake Engineering Research Center, CGS. The acceleration tracking performance and specifically the inability of the earthquake simulator to accurately replicate the input signal can be considered as the main challenge during shaking table test. The objective of this study is to validate the uni-axial sinusoidal performances curves and to assess the accuracy and fidelity in signal reproduction using the advanced adaptive control techniques incorporated into the MTS Digital controller and software of the CGS shaking table. A set of shake table tests using harmonic and earthquake acceleration records as reference/commanded signals were performed for four test configurations: bare table, 60 t rigid mass and two 20 t elastic specimens with natural frequencies of 5 Hz and 10 Hz.

• Journal of the Korean Society of Child Welfare
• /
• no.27
• /
• pp.7-35
• /
• 2008

The model of family decision-making in child protection has been widely discussed and adopted in many countries. The purpose of this study was to introduce the model and, then, investigate whether this process is applicable in child care and protection services in Korea. The main goal in the study has been to explore the philosophical and practical foundations of the family involvement approach in decision-making and describe the international applications of the model. Family group conferencing, originally developed and enacted in New Zealand, has been critically examined. The potential contributions of the study may include seeking a more effective intervention for child protection through determining whether the model is appropriate or desirable in issues of philosophy, practice and policy within the Korean culture.