• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.23.2-23.2
• /
• 2009

기존에 사용되었던 알루미늄 배선 공정은 공정의 배선 크기가 줄어들면서 한계에 다다르고 있다. 따라서 이를 대체하기 위해 여러 가지 새로운 방법들이 고안되고 있으며, 그중 알루미늄을 비저항이 낮고 EM(electro-migration) 저항성이 뛰어난 구리로 대체하려는 연구가 진행되고 있다. 구리 배선은 이미 electroplating 공정을 이용해 산업에 적용되고 있으며, seed layer로는 sputtering 법을 이용하고 있다. 하지만 sputtering 을 포함한 PVD 법은 대부분 종횡비나 단차 피복도가 좋지 않기 때문에 이를 CVD로 교체한다면 많은 장점을 가질 수 있다. 하지만 CVD 공정을 진행하기 위해서는 많은 문제점들이 있는데, 이중 전구체에 대한 문제도 빼놓을 수 없는 이슈이다. Cu(dmamb)2 는 기존에 사용하던 $\beta$-diketonate 계열의 전구체보다 화학적으로 많은 장점을 가지고 있어, CVD 공정에 적합하다. 이에 따라 구리 박막 증착의 공정 조건을 설계하고, 고품질의 박막을 증착하기 위한 다양한 처리법을 고안하여 증착 실험을 진행하였다. 기본적으로 구리는 확산력이 좋아 실리콘계열의 기판에서 확산력이 매우 좋아 기판 내로 확산되기 때문에 이를 방지하기 위하여 Ta, Ti 계열의 박막을 사용하여 확산을 방지하고 있다. 따라서 전이 금속 박막의 표면과 증착 분위기 등을 고려하여 구리를 증착하였으며, 표면의 미세구조 및 성분을 FESEM 등을 통해 분석하였다.

• Animal cells and systems
• /
• v.15 no.1
• /
• pp.53-61
• /
• 2011

The fine structural characteristics of the antennal sensory organs of a female millipede Oxidus gracilis (Polydesmida: Paradoxomatidae) were observed with both field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). We could identify four apical cones and three basic types of antennal sensillae in a. gracilis as follows: chaetiform sensilla (CS), trichoid sensilla (TS) and basiconic sensilla (BS). Of these, both types of CS and TS can be observed throughout all antennal segments except the terminal 8th article, whereas the BS are observed within the cuticular depressed regions of the articles from the 5th to the 7th segment. According to their relative microstructure and location, the BS arc divided further into three subtypes: large ($BS_1$) small ($BS_2$) and spiniform ($BS_3$). The $BS_1$ can be seen on the 5th article only, while $BS_2$ can be seen on the 5th and 6th articles. The $BS_3$ is characteristically seen within the depressive region of the 7th article. Both the CS and TS of O. gracilis are similar in structure, and they are related to the function of mechanical reception; however, four large apical cones (AP) and three subtypes of BS are likely to function in gustatory and olfactory reception.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.220-223
• /
• 2001

Pb가 10% 과잉되고 Zr : Ti = 52 : 48 조성을 갖는 PZT sol이 Pt(3500Å)/Ti(400Å)/SiO₂(3000Å)Si(525㎛)기판 위에 스핀 코팅법으로 반복 코팅된 후, 450℃에서 10분, 650℃에서 2분간 반복 열처리되었다. 이와 같이 다양한 두께로 적층된 박막은 각 시편에 대해 최종적으로 650℃ 30분 동안 어닐링 처리되었다. 제조된 PZT 박막의 두께는 4100Å에서 1.75㎛사이의 4종이었다. 이어서 스퍼터링법으로 Pt전극이 PZT 막 위에 증착되었다. 제조된 PZT 박막의 결정 구조 조사를 위해 XRD, 그리고 미세 구조 및 전기적 특성을 알아보기 위해 FESEM과 P-E 이력 곡선이 각각 관찰되었다. 4100Å에서 1.75㎛까지 두께 증가에 따른 장비상의 포화 이력 한계로 잔류 분극(Pr)값이 25μC/㎠에서 다소 감소되었다. 측정된 X선 회절 결과에서 최초 4회 코팅시 perovskite 결정 구조로 성장한 결정립은 (111)배향이 우세하었으나, 두께가 증가됨에 따라 (111)/(110)값이 감소되었으며, 이를 통해 두께 증가에 따른 (111)배향성이 다소 감소됨을 알 수 있었다. 이상의 결과로부터 제조된 PZT 박막은 큰 힘과 높은 내전압 특성을 갖는 마이크로 압전 액츄에이터에 적용될 수 있을 것으로 생각되었다.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1444-1445
• /
• 2006

Carbon nanotubes (CNTs) are grown on TiN-Coated silicon substrates at $700^{\circ}C$ using an ICP-CVD method. Ni catalysts for CNT growth are formed using an RF magnetron sputtering system. Post-treatment using hydrogen ions has been performed in the ICP reactor by varying the treatment period. The characterization using various techniques, such as FESEM, HRTEM, and Raman spectroscopy, show that the physical dimension as well as the crystal quality of CNTs are changed by the post-treatment process. It is also seen that the hydrogen ion-bombardment may change the surface structure of CNTs, which may lead to produce better electron emission properties. The physical reason for all the measured data obtained are discussed to establish the relationship between the structural property and the electron emission characteristic of CNTs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.28-28
• /
• 2007

Ferroelectric $(Ba_{0.5}Sr_{0.5})TiO_3$ (BST) thin films of thickness 500nm were deposited on $LaAlO_3$, (LAO) substrates by at $800^{\circ}C$. BST films were characterized for structure using X-ray diffraction (XRD). The surface morphology and thickness of BST the films were characterized by atomic force microscopy (AFM) and field emission scanning electron microscope (FESEM). We measured the dielectric properties at microwave frequencies (1~3 GHz) using a symmetrical stripline resonator with shorted ends and terahertz frequencies (0.2~2.5 THz) using a time-domain terahertz spectroscopy. The real and imaginary parts of the complex dielectric constant of the BST thin films on LAO substrates were in agreement with those previously reported.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.444-445
• /
• 2007

IZO/Al multilayer anode films for flexible top emitting organic light emitting diodes (TOLEDs) were grown on PEN (polyethylen-enaphthelate) substrate using twin target sputter (TTS) system. To investigate electrical and optical properties of IZO/Al multilayer films, 4-point probe method and UV/Vis spectrometer were used, respectively. From a IZO/Al multilayer films with 100nm-thick Al, sheet resistance of $1.4{\Omega}/{\square}$ and reflectance of above 62% at a range of 500~550nm wavelength could be obtained, In addition, structural and surface properties of IZO/Al multilayer films were analyzed by XRD (X-ray diffraction) and FESEM (field emission scanning electron microscopy) and AES (auger electron spectroscope), respectively. Moreover, flexibility of IZO/Al multilayer anode films were examined by bending test method.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1271-1272
• /
• 2007

Experimental results regarding to the structural properties of carbon nanotubes (CNTs) and the field-emission characteristics of CNT-coated tungsten (W) tips are presented. CNTs are successfully grown on conical-type W-tips by inductively coupled plasma-chemical vapor deposition (ICP-CVD) with or without inserting a TiN-buffer layer prior to the formation of Ni catalysts. For all the CNTs grown, their nanostructures, morphologies, and crystalline structures are analyzed by FESEM, HRTEM, and Raman spectroscopy. Furthermore, the emission properties of CNT-based field-emitters are characterized to estimate the maximum current density and the threshold voltage. The results obtained in this study indicate that the emission current level of the CNT-emitter without using a TiN buffer is desirable for the application of micro-focused x-ray systems.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.108-109
• /
• 2006

ZnO semiconductor has a wide band gap of 3.37 eV and a large exciton binding energy of 60 meV, and displays excellent sensing and optical properties. In particular, ZnO based 1D nanowires and nanorods have received intensive attention because of their potential applications in various fields. We grew ZnO buffer layers prior to the growth of ZnO nanorods for the fabrication of the vertically well-aligned ZnO nanorods without any catalysts. The ZnO nanorods were grown on Si (111) substrates by vertical MOCVD. The ZnO buffer layers were grown with various thicknesses at $400^{\circ}C$ and their effect on the formation of ZnO nanorods at $300^{\circ}C$ was evaluated by FESEM, XRD, and PL. The synthesized ZnO nanorods on the ZnO film show a high quality, a large-scale uniformity, and a vertical alignment along the [0001]ZnO compared to those on the Si substrates showing the randomly inclined ZnO nanorods. For sample using ZnO buffer layer, 1D ZnO nanorods with diameters of 150-200 nm were successively fabricated at very low growth temperature, while for sample without ZnO buffer the ZnO films with rough surface were grown.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.1
• /
• pp.63-69
• /
• 2014

This paper presents the feasibility of using different iron oxides (microscale hematite (HT), microscale magnetite (MT), and nanoscale maghemite (NMH)) in enhancing nitrate reduction by zero-valent iron (Fe(0)) under two solution conditions (artificial acidic water and real groundwater). Addition of MT and NMH into Fe(0) system resulted in enhancement of nitrate reduction compared to Fe(0) along reaction, especially in groundwater condition, while HT had little effect on nitrate reduction in both solutions. Field emission scanning electron microscopy (FESEM) analysis showed association of MT and NMH with Fe(0) surface, presumably due to magnetic attraction. The rate enhancement effect of the minerals is presumed to arise from its role as an electron mediator that facilitated electron transport from Fe(0) to nitrate. The greater enhancement of MT and NMH in groundwater was attributed to surface charge neutralization by calcium and magnesium ions in groundwater, which in turn facilitated adsorption of nitrate on Fe(0) surface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.232-232
• /
• 2010

정보화 산업의 발달은 DRAM, flash memory 등을 포함한 기존의 반도체 메모리 소자를 대체할 수 있는 차세대 메모리 소자에 대한 개발을 요구하고 있다. 특히 magnetic random access memory (MRAM)는 SRAM과 대등한 고속화 그리고 DRAM 보다 높은 기록 밀도가 가능하고 낮은 동작 전압과 소비전력 때문에 대표적인 차세대 비휘발성 메모리로 주목받고 있다. 또한 MRAM소자의 고집적화를 위해서 우수한 프로파일을 갖고 재증착이 없는 나노미터 크기의 magnetic tunnel junction (MTJ) stack의 건식 식각에 대한 연구가 선행되어야 한다. 본 연구에서는 고밀도 반응성 이온 식각법(Inductively coupled plasma reactive ion etching; ICPRIE)을 이용하여 재증착이 없이 우수한 식각 profile을 갖는 CoFeB과 IrMn 박막을 형성하고자 하였다. Photoresist(PR) 및 Ti 박막의 두 가지 마스크를 이용하여 HBr/Ar, HBr/$O_2$/Ar 식각 가스들의 농도를 변화시키면서 CoFeB과 IrMn 박막의 식각 특성들이 조사되었다. 자성 박막과 동일한 조건에 대하여 hard mask로서 Ti가 식각되었다. 좋은 조건을 얻기 위해 HBr/Ar 식각 가스를 이용 식각할 때 pressure, bias voltage, rf power를 변화시켰고 식각조건에서 Ti 하드마스크에 대한 자성 박막들의 selectivity를 조사하고 식각 profile을 관찰하였다. 식각 속도를 구하기 위해 alpha step(Tencor P-1)이 사용되었고 또한 field emission scanning electron microscopy(FESEM)를 이용하여 식각 profile을 관찰함으로써 최적의 식각 가스와 식각 조건을 찾고자 하였다.