• 한국자동차공학회논문집
• /
• 제6권6호
• /
• pp.1-6
• /
• 1998

A leaf spring plays an important role in a passenger bus. Since characteristic of a leaf spring has a hysteresis behaviour, modeling technique for a leaf spring is an important issue for passenger bus analysis. In this paper, modeling technique for a leaf spring is presented. First, non-linear FEM model of a leaf spring is constructed then it is used to make an approximated model to be used in dynamic analysis. The modeling procedure is ex-plained in step by step approach. Then, this model is applied to dynamic analysis of a mini-bus with flexible body and non-linear dynamic force element. The results are compared with test data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.848-851
• /
• 2005

ATM(Automated-feller Machine) is a machine that receives and pays money directly. The double bill detector (DBD) module of an ATM detects double bill from its thickness. In this paper, the dynamic behavior of the DBD was analyzed numerically and experimentally. The moment of inertia of the double bill lever and the spring constant were measured respectively. And the displacements of the ]ever was measured experimentally. The measured dynamic behaviors were simulated numerically using vector equation. Through the analysis, the design factors were found to make a fast and reliable new ATM machine.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.149-151
• /
• 2006

This paper shows the characteristic analysis of single-phase LSPM(Line Start Permanent Magnet) synchronous motor considering overhang structure. To obtain the dynamic and steady performance of the motor, the D-Q equivalent circuit is used and the circuit parameters are extracted by 3D FEM. The performance of the model with overhang is compared with conventional model without overhang on the condition that both models have the same volume of the permanent magnet.

• 전산구조공학
• /
• 제3권1호
• /
• pp.51-57
• /
• 1990

현행 원자력 발전 구조물의 설계하중 조합규준은 확률적 개념에 의한것이 아닌 재래적인 설계 개념을 그대로 사용하고 있는 실정이다. 본 연구에서는 원자력 발전 구조물의 설계하중 조합 규준을 FEM에 기초한 랜덤 진동 해석을 통하여 제안하였다. 종래의 일반적 신뢰성 해석 방법과는 달리 유한요소 해석 결과를 랜덤 진동 이론에 결합하여 해석함으로서 지진하중과 같은 각종 동적 하중에 대한 보다 정확한 신뢰성 해석이 가능하게 되었다. 본 연구에서는 설계하중 조합 규준을 통하여 국내 원자력 발전 구조물에 적합한 설계하중 계수를 제안하였다.

• 한국소음진동공학회논문집
• /
• 제13권6호
• /
• pp.474-483
• /
• 2003

In this study, the dynamic characteristics of a catenary system and pantograph supplying electrical power to high-speed trains are investigated. One of the most important issues accompanied by increasing the speed of high-speed rail is stabilization of current collection. To stabilize current collection, it is necessary the contact force between the catenary and the pantograph to be kept continuous without loss of contact. The analytical model of a catenary and a pantograph is constructed to simulate the behavior of an actual system. The analysis of the catenary based on the Finite Element Method (FEM) is performed to develop a catenary model suitable for high speed operation. The reliability of the models is verified by the comparison of the excitation test with Fast Fourier Transform (FFT) data of the actual system. The static deflection of the catenary, stiffness variation in contact lines, dynamic response of the catenary undergoing constant moving load, contact force, and each state of the pantograph model were calculated. It is confirmed that a catenary and pantograph model are necessary for studying the dynamic behavior of the pantograph system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.679-685
• /
• 2001

In this paper, the dynamic response of the pantograph system that supplies electrical power to a high-speed rail vehicle were investigated. The analysis of the catenary based on the Finite Element Method (FEM) is executed to develop a pantograph fits well in high-speed focused on the dynamic characteristic analysis of the pantograph system. By simulation of the pantograph-catenary system, the static deflection of the catenary, the stiffness variation in contact lines, the dynamic response of the catenary undergoing constant moving load and the contact force analysis were executed. In order to consider the design variables that effects on the dynamic characteristic of the pantograph system performed the dynamic sensitivity analysis. From the pantograph-catenary analysis, the design parameters of a pantograph could be improved. From the results of the sensitivity analysis, a pantograph with improved parameters is suitable for a high-speed rail vehicle from the design-parameter analysis.

• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.61-67
• /
• 2005

A dynamic model for flexure hinge-based compliant mechanisms is derived. The dynamic model of the previous works do not well describe the behaviors of rigid bodies in the compliant mechanism when the length of the flexure hinge is long. In this study, the effect on the length of the flexure hinge is pointed out and then the dynamic model is derived to overcome the length effect. For verification, modal analyses are carried out using the proposed dynamic model and FEM (Finite Element Method). Finally they are compared by the terms of modal frequency. As the result, the proposed dynamic model can be used in design and analysis of the compliant mechanism.

• 한국소음진동공학회논문집
• /
• 제20권1호
• /
• pp.98-105
• /
• 2010

Squeal, a kind of self-excited vibration, is generated by the friction between the disc and the friction materials. It occurs at the ending stage of the braking process, and radiates and audible frequency range of 1 kHz to 10 kHz. Squeal is generated from unstability because of the coupling between the translation and rotation of the system. This instability is caused by the follower force and follower force is normal component of the friction force. In this paper modal analysis of wheel brake system was performed in order to predict the squeal phenomenon. It was shown that the prediction of system instability is possible by FEM. A finite element model of that brake system was made. Some parts of a real brake was selected and modeled. Modal analysis method performs analyses of each brake system component. Experimental modal analysis was performed for each brake components and experimental results were compared with analytical results from FEM. To predict the dynamic unstability of a whole system, the complex eigenvalue analysis for assembly modeling of components confirmed by modal analysis is performed. The finite element models of the disk brake assembly have been constructed, and the squeal noise problems have been solved by complex eigenvalue analysis. The complex eigenvalue analysis results compared with real train test.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.469-471
• /
• 2010

초공동 수중 운동체의 구조물은 수중 운동 시에 유동 마찰에 의해 생성되는 높은 축 방향 하중과 추력의 조합에 의해 좌굴 현상이 발생하게 되며, 이는 구조물의 손상과 연결된다. 따라서 운용하고자 하는 수동 운동체의 속도 범위에서 이러한 좌굴이 발생되지 않도록 구조 설계가 요구되며, 이는 유한요소 해석을 이용한 정적 및 동적 좌굴 해석으로 좌굴 예측이 가능하다. 본 연구에서는 이러한 좌굴 해석을 위한 기초적인 소개와 유한요소 좌굴 해석에 필요한 고유치 해법을 소개하고, 좌굴 해석에 앞서 고유치 해법을 통한 고유 진동수 및 모드 형상을 DIAMOND/IPSAP 프로그램을 통해 예측하여 보았다.

• 대한기계학회논문집A
• /
• 제36권6호
• /
• pp.699-705
• /
• 2012

안전벨트의 역할은 차량 충돌이 발생했을 때 운전자를 보호하는 것이다. 그러나 강한 충돌이 발생하게 되면 운전자가 안전벨트에서 미끄러지게 되어 강한 충격을 받는다. 그러므로 이러한 현상을 방지하기 위해 새로운 안전벨트의 개발이 필요하다. 이 연구에서는 새로운 개념의 안전벨트인 Dynamic Locking Tongue(DLT)을 개발하였다. DLT장치는 강한 충돌이 발생했을 때 벨트(Webbing)가 안전벨트에서 미끄러지지 않게 하여 운전자의 피해를 줄여주는 장치이다. DLT장치 개발은 동역학 해석 프로그램인 SAMCEF를 이용하였다. 우선 DLT장치의 유한요소모델을 생성하였다. 그리고 실제 시험방법과 유사한 환경을 만들어 테스트를 해보았다. 이를 통해 DLT장치의 무게와 응력를 구할 수 있다. DLT장치의 최소 강도와 무게를 구하기 위해 반응 표면 분석법을 이용하여 DLT장치의 형상을 최적화하였다. 최적화된 DLT장치를 구조 해석을 통해 신뢰성을 검증하였다.