• 한국항해항만학회지
• /
• 제32권9호
• /
• pp.717-722
• /
• 2008

We have proposed and demonstrated an gas-flow sensor using optical fiber bragg grating(FEG). The flow sensor has no electronics and no mechanical parts in its sensing part and the structure is th11s simple and immune to electromagnetic interference(EMI). The FEG sensor was consisted qf the sensing element and a coil heater. The metal coil was used to supply the current to the FEG. While some currents supply to the coil, the refractive index of the FEG under the coil is changed and thus the wavelength shift of fiber optic sensor was induced In this work, the wavelength shift according to flow-rate was experimentally studied and was used to evaluate the gas flow-rate in a gas tube. As a result, it was possible to measure the flow-rate in a linear range from 5 to $20{\ell}/min$ with a resolution of approximately $1{\ell}/min$ at the applied currents of 100 mA and 120 mA. The measured sensitivities were $15.3\;pm/\ell/min$ for 100 mA and $20.2\;pm/\ell/min$ for 120 mA.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.3-9
• /
• 2006

Among many fabrication methods of composite materials, filament winding is the most effective method for fabricating axis-symmetric structures such as pressure tanks and pipes. Filament wound pressure tanks are under high internal pressure during the operation and it has the complexity in damage mechanisms and failure modes. Fiber optic sensors, especially FBG sensors can be easily embedded into the composite structures contrary to conventional electric strain gages (ESGs). In addition, many FBG sensors can be multiplexed in single optical fiber using wavelength division multiplexing (WDM) techniques. In this paper, we fabricated several filament wound pressure tanks with embedded FBG sensors and conducted some kinds of experiments such as an impact test, a bending test, and a thermal cycling test. From the experimental results, it was successfully demonstrated that FBG sensors are very appropriate to composite structures fabricated by filament winding process even though they are embedded into composites by multiplexing.

• 한국전산구조공학회논문집
• /
• 제21권3호
• /
• pp.287-294
• /
• 2008

이 연구에서는 교량 상부구조물의 보수 보강에 많이 사용되는 7연 강연선의 공용중 긴장력 관리를 위한 새로운 방법은 제안하였다. 제안된 스마트 강연선은 기존 강연선의 중앙 킹와이어를 강제튜브로 대체하고, 강제튜브의 내부에 FBG 광섬유센서를 설치하여 강연선의 변형률을 측정할 수 있도록 하였다. 내장된 센서를 통하여 이 스마트 강연선의 변형률을 쉽게 측정할 수 있으므로, 공용중 강연선의 긴장력을 모니터링할 수 있다. 본 연구에서 제안된 장력 모니터링 방법의 효용성을 증명하기 위하여 FBG센서 2개가 내장된 길이 7.0m인 스마트 강연선을 제작하고, 이를 길이 6.4m, 높이 0.6m인 RC T형 모형거더에 외장형 텐던으로 적용하였다. 그리고 이 시험거더에 대한 재하-제하시험을 실시하고 로드셀에서 계측된 긴장력과 스마트 강연선을 이용하여 예측한 긴장력을 비교하였다. 비교 결과, 제안된 스마트 강연선은 긴장력이 작용된 강연선의 장력을 정확하게 모니터링 하는데 유용함을 확인할 수 있었다.