• 대한기계학회논문집A
• /
• 제35권3호
• /
• pp.223-233
• /
• 2011

세라믹 모노리스 촉매는 두 계층으로 구성된 하니컴 구조이다. 하니컴 구조는 열유동 및 구조해석에서 연속체로 고려한다. 하니컴 구조의 등가 기계적 물성은 유한요소해석(FEA) 시험편으로부터 얻어진다. 강도 시험과 FEA는 ASTM C1674-08에서 소개된 사각 단위 셀 시험편과 시험방법에 의해 각각 달성되었다. 코제라이트 세라믹 층과 워시코트 층 사이의 접합계수는 거의 0이다. FEA 시험편은 접합계수에 기반한 모델로 만들어진다. 세라믹 모노리스 담체에서 탄성계수, 푸아송 비와 열적 물성은 FEA 시험편에 의해 결정하였다.

• 소음진동
• /
• 제8권1호
• /
• pp.139-145
• /
• 1998

A great deal of effort has been invested in upgrading the performance and the efficiency of dynamic analysis of mechanical structures. Using experimental modal analysis(EMA) or finite element analysis(FEA) data of mechanical structures, the performance and efficiency can be effectively evaluated. In order to analyze complex structures such as automobiles and aircrafts, for the sake of computing efficiency, the dynamic substructuring techniques that allow to predict the dynamic behavior of a structure are widely used. Through linking a modal model obtained from EMA and an analytical model obtained from FEA, the best conditioned strucutres can be proposed. In this study, a new algorithm of substructre synthesis method, Multi-FRF synthesis method, is proposed to analyze a structure composed of many substructures.

• 한국전산구조공학회논문집
• /
• 제33권3호
• /
• pp.145-152
• /
• 2020

본 논문에서는 유한요소해석을 이용하여 흉요추 후방 고정술의 고정분절 변화에 따른 척추 안정성을 평가하였다. 이를 위해 추간판, 인대, 추간관절(Facet joint) 등을 포함한 정상 흉요추(T10-L4)의 유한요소모델을 구축하였으며, 문헌으로 보고된 재료물성치를 부여하였다. 한편, L1을 병변 부위로 가정하였으며, L1-L2, T12-L2, T12-L1-L2 총 3가지 종류의 후방 고정술을 흉요추 유한요소모델에 구현하고 전방 굽힘, 후방 굽힘, 측면 굽힘, 축 회전의 하중 조건을 부여하였다. 시리즈 유한요소해석을 통해 고정분절에 따른 척추경 나사못, 척추골, 추간판의 변형량, 등가 응력, 운동 범위, 모멘트를 계산하였으며, 그 결과를 바탕으로 척추 안정성을 평가하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권4호
• /
• pp.20-27
• /
• 2021

이 연구에서는 강봉 트러스 시스템으로 보강된 조적벽체의 내진거동을 합리적으로 평가하기 위하여 범용프로그램인 Abaqus를 이용한 비선형 유한요소해석 절차를 제시하였다. 조적벽체의 유한요소 모델은 콘크리트 손상 소성(concrete damaged plasticity, CDP)모델 및 벽돌-모르타르 계면 특성은 Yang et al.이 제시한 조적 프리즘의 압축 및 인장의 응력-변형률 모델과 전단마찰모델을 기반으로 메소-스케일법을 적용하였다. 유한요소 해석결과를 다양한 변수조건에서 실험결과와 비교한 결과, 강봉 트러스 시스템으로 보강된 조적벽체의 균열진전, 파괴 모드, 강체회전 내력 및 최대내력 그리고 횡하중-횡변위 관계에 대한 실험결과와 잘 일치하였다. 따라서 제시된 유한요소해석 절차는 조적벽체의 내진보강 설계에 합리적으로 이용될 수 있다고 판단된다.

• 마이크로전자및패키징학회지
• /
• 제20권2호
• /
• pp.33-38
• /
• 2013

In this study, both a finite element analysis and an experimental analysis are executed to investigate the mechanical characteristics of dielectric material effects on warpage. Also, viscoelastic material properties are measured by DMA and are considered in warpage simulation. A finite element analysis is done by using both thermal elastic analysis and a thermo-viscoelastic analysis to predict the nonlinear effects. For experimental study, specimens warpage of non-symmetric structure with body size of $22.5{\times}22.5$ mm, $37.5{\times}37.5$ mm and $42.5{\times}42.5$ mm are measured under the reflow temperature condition. From the analysis results, experimental warpage is not similar to FEA results using thermal elastic analysis but similar to FEA results using thermo-viscoelastic analysis. Also, its effect on substrate warpage is increased as core thickness is decreased and body size is getting larger. These FEA and the experimental results show that the nonlinear characteristics of dielectric material play an important role on substrate warpage. Therefore, it is strongly recommended that non-linear behavior characteristics of a dielectric material should be considered to control warpage of FCBGA substrate under conditions of geometry, structure and manufacturing process and so on.

• 한국멀티미디어학회논문지
• /
• 제10권2호
• /
• pp.200-208
• /
• 2007

가장 흔한 직업병 중의 하나인 소음성 난청은 알려진 치료법이 없기 때문에 예방하는 것이 매우 중요하다. 청각보호를 위한 다양한 종류의 청각보호구가 시판되고 있으며 청각보호에도 효과가 있는 것으로 알려져 있지만, 착용 시 발생하는 의사소통의 어려움으로 인하여 많은 사용자들이 착용을 꺼리게 된다. 이러한 의사소통의 문제점을 해결하기 위해 음관의 형태를 변화시켜 소형 음향필터를 사용할 수 있다. 본 논문에서는 소형 음향필터들을 설계하였고 이의 특성을 유한요소해석을 통하여 분석하였다. 유한요소해석의 결과로써 길이와 직경에 따라 설계된 소형 음향필터의 특성을 확인하였다. 그리고 유한요소해석을 이용한 필터 모델의 일반적인 추세와 설계된 필터들의 음향적 실험과 일치함을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제72권3호
• /
• pp.383-393
• /
• 2019

Horizontal openings in reinforced concrete (RC) beams are quite often used to accommodate service pipelines. Several research papers are available in the literature describing their effect. RC beams with vertical openings are commonly used to accommodate service lines in residential buildings in Kuwait. However, there are lack of design guidelines and best practices reported in the literature for RC beams with vertical openings, whereas the detailed guidelines are available for beams with horizontal openings. In the present paper, laboratory experiments are conducted on nine RC beams with and without vertical openings. Parametric study has been carried out using nonlinear finite element analysis (FEA) with changes in the diameter of the opening, various positions of the opening along the length and width of the beam, edge distance, etc. 50 finite element simulations were conducted. The FEA results are verified using the results from the laboratory experiments. The study showed that the load carrying capacity of the beam is reduced by 20% for the RC beam with vertical openings placed near the center of the beam compared to a solid beam without an opening. Significant reduction in load carrying capacity is observed for beams with an opening near the support (${\approx}15%$). The overall stiffness of the beam, crack pattern and failure modes were not affected due to the presence of the vertical opening. Furthermore, an artificial neural network (ANN) analysis is carried out using the FEA generated data. The results and observations from the ANN and FEA are in good agreement with experimental results.

• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.164-170
• /
• 2003

To ensure the reliability of DVDR-P and DVD-ROM, it is imperative to remedy the unrecoverable creep deformation and/or relaxation of the holding force of an optical disc holder. To predict the deformation of an optical disc holder, a deformation analysis of an 80 mm optical disc holder considering the creep characteristics of 3 plastic materials has been conducted. Subsequently, the results by this Finite Element Analysis (FEA) are experimentally verified. A disc holder inserted in a cartridge case is kept in a chamber of $60^{\circ}C$ with 90 % humidity for 24 hours. The arm span and the holding force of the disc holder are measured after being left for another 24 successive hours at a room temperature and under normal humidity. The predicted results by FEA are in good agreement with experimentally measured values.

• 소음진동
• /
• 제5권4호
• /
• pp.503-514
• /
• 1995

In the case of performing experimental modal analysis(EMA) and finite- element analysis(EFA) for a whole structure of automotive body that is composed of many complex parts, a trouble may arise from the calculation time, the capacity of memory in computers and the experimental conditions, etc. In this paper, for the vibrational analysis of automotive body model, the efficient modal synthesis method by means of dividing the whole structure into two parts and performing EMA and FEA for each part is studied. In addition, the method based on Lagrange interpolation is proposed for approximating rotational degrees-of-freedom information and linking FEA with EMA. In result, by measuring translational degrees-of-freedom information of only few points and adopting only few modes, the linking method based on Lagrange interpolation turned out to be efficient and accurate in the low frequency range.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.850-851
• /
• 2008

This paper compares and investigates the vibration and noise characteristics through simulations of 12/8 and 6/4 switched reluctance motors (SRMs). The radial force which is the main source of vibration is computed from two-dimensional(2D) transient magnetic finite element analysis (FEA) and compared in both time and frequency domain. At the same output power, the radial force of 6/4 SRM is found to be more than two times as that one of 12/8 SRM. Three-dimensional structural finite-element analysis (3D FEA) is used to study the mechanical characteristics. It can be concluded from static structural analysis that the maximum total deformation could be reduced to 1/26 if the motor is designed with 12/8 structure instead of 6/4. The dominant vibration modes are verified by modal analysis.