• Journal of Nutrition and Health
• /
• v.32 no.8
• /
• pp.935-945
• /
• 1999

The factors affecting bone mineral density (BMD) of 103 rural women aged 30 to 76 years were investigated. Data for food and nutrient intake was obtained by 24-hour recall method. BMD of lumbar spine(L1-L4), femoral neck, ward's triangle and trochanter was measured by XR-series x-ray bone densitometer. Serum was collected and analyzed for total Ca, P and ionized Ca (Ca++)content. Relationship between the factors and BMDs was analyzed by Pearson's correlation coefficient(r) and multiple regression analysis. The results are summarized as follows. 50% of the subjects under 50 years of age($\leq$49 yr group) and 86.4% of the subjects from 50 up($\geq$50yr group) were classified as osteopenia or osteoporosis. Mean body weight, height and BMI were 153.1cm, 59.1kg and 25.0kg/$m^2$ in $\leq$49 yr group and 151.9cm, 55.9kg, and 24.2kg/$m^2$ in $\geq$50 yr group. BMDs of lumbar spines and femurs ranged from 0.84 to 1.05g/$m^2$ and from 0.67 to 1.16g/$m^2$ in $\leq$49 yr group, and ranged from 0.67 to 0.85kg/$m^2$ and from 0.68 to 0.44g/$m^2$ in $\geq$50 yr group, respectively. On the whole, the BMDs were reduced to 83.8 to 94.2% of peck bone mass in $\leq$49 yr group and 55.2 to 78.9% of those in $\geq$50 yr group. Mean daily intake of Ca was much less than the Korean RDA, \67.2% in $\leq$49 yr group and 62.3% in $\geq$50 yr group. The average concentration of total Ca, P and Ca++ in serum were within normal range in both age group. Both age and height were significantly related with BMD in both age group but the relationship tended to be stronger in $\geq$50 yr group than in $\leq$49 yr group. Body weight was also a potent determinant of BMD only in 50 yr group. In $\leq$49 yr group, total food intake was positively related with BMDs of ward's triangle, L1 and L2 and intake of cereals and grain products, sugars and sweets, milk and dairy products was positively related with BMDs measured in this study. On the contrary, intake of eggs, oil and fats were positively related with a few BMDs in 50 yr group. The BMDs were positively affected by intake of energy, protein, carbohydrate, Ca, P and Fe in $\leq$49 yr group and those of protein, fat Ca, P, vitamin B1, vitamin B2 and vitamin C in $\geq$50 yr group. It was noteworthy that serum Ca++ concentration was positively related with BMDs of lumbar spine in boty age groups. According to multiple regression analysis, the four factors, age, body weight, height and BMI additionally accounted for 21% of the variance in BMD of trochanter in $\leq$49 yr group and only two factors, age and C a intake accounted for 38% of that of femoral neck in $\geq$50 yr group. Further investigation is necessary to make sure of the relations between BMD and serum Ca++ level.

• Steel and Composite Structures
• /
• v.50 no.6
• /
• pp.705-720
• /
• 2024

Analyzing the collapse behavior of thin-walled steel structures holds significant importance in ensuring their safety and longevity. Geometric imperfections present on the surface of metal materials can diminish both the durability and mechanical integrity of steel shells. These imperfections, encompassing local geometric irregularities and deformations such as holes, cavities, notches, and cracks localized in specific regions of the shell surface, play a pivotal role in the assessment. They can induce stress concentration within the structure, thereby influencing its susceptibility to buckling. The intricate relationship between the buckling behavior of these structures and such imperfections is multifaceted, contingent upon a variety of factors. The buckling analysis of thin-walled steel shell structures, similar to other steel structures, commonly involves the determination of crucial material properties, including elastic modulus, shear modulus, tensile strength, and fracture toughness. An established method involves the emulation of distributed geometric imperfections, utilizing real test specimen data as a basis. This approach allows for the accurate representation and assessment of the diversity and distribution of imperfections encountered in real-world scenarios. Utilizing defect data obtained from actual test samples enhances the model's realism and applicability. The sizes and configurations of these defects are employed as inputs in the modeling process, aiding in the prediction of structural behavior. It's worth noting that there is a dearth of experimental studies addressing the influence of geometric defects on the buckling behavior of cylindrical steel shells. In this particular study, samples featuring geometric imperfections were subjected to experimental buckling tests. These same samples were also modeled using Finite Element Analysis (FEM), with results corroborating the experimental findings. Furthermore, the initial geometrical imperfections were measured using digital image correlation (DIC) techniques. In this way, the response of the test specimens can be estimated accurately by applying the initial imperfections to FE models. After validation of the test results with FEA, a numerical parametric study was conducted to develop more generalized design recommendations for the stainless-steel shell structures with the initial geometric imperfection. While the load-carrying capacity of samples with perfect surfaces was up to 140 kN, the load-carrying capacity of samples with 4 mm defects was around 130 kN. Likewise, while the load carrying capacity of samples with 10 mm defects was around 125 kN, the load carrying capacity of samples with 14 mm defects was measured around 120 kN.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.1
• /
• pp.31-38
• /
• 2024

In this study, vinyl waste, which is the cause of environmental pollution, is recycled via an electrospinning method and applied as a separator that can be employed for energy storage devices. In detail, vinyl wastes are dissolved in a solution containing p-xylene and cyclohexanone, followed by electrospinning to obtain a vinyl waste-derived separator(VWS), and then the hydrophilic functional groups on the surface of VWS are introduced using a plasma treatment to improve wettability. Scanning electron microscopy analysis have verified that the shape and thickness of as-spun VWS vary depending on the concentration of vinyl waste. The surface hydrophility of VWS is modified by plasma treatment with applied powers ranging from 80 to 120W. The lowest contact angle is observed when the 100W power is applied to VWS(VWS-100W). In electrochemical analysis, the VWS-100W-based supercapacitor device shows the highest specific capacitance of 57.9 F g^-1. This is ascribed to the high porosity achieved by electrospinning as well as the introduction of hydrophilic functional groups by the oxygen plasma treatment. In conclusion, vinyl waste is successfully recycled into separators for energy storage devices, suggesting a new way to reduce environmental pollution.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.403-414
• /
• 2004

In the accompanying paper, we proposed a real. time volumetric imaging method using a cross array based on receive dynamic focusing and synthetic aperture focusing along lateral and elevational directions, respetively. But synthetic aperture methods using spherical waves are subject to beam spreading with increasing depth due to the wave diffraction phenomenon. Moreover, since the proposed method uses only one element for each transmission, it has a limited transmit power. To overcome these limitations, we propose a new real. time volumetric imaging method using cross arrays based on synthetic aperture technique with linear wave fronts. In the proposed method, linear wave fronts having different angles on the horizontal plane is transmitted successively from all transmit array elements. On receive, by employing the conventional dynamic focusing and synthetic aperture methods along lateral and elevational directions, respectively, ultrasound waves can be focused effectively at all imaging points. Mathematical analysis and computer simulation results show that the proposed method can provide uniform elevational resolution over a large depth of field. Especially, since the new method can construct a volume image with a limited number of transmit receive events using a full transmit aperture, it is suitable for real-time 3D imaging with high transmit power and volume rate.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.245-253
• /
• 2011

Purpose: The aim of this in vitro study was to estimate surface characteristic after peptide coating and investigate biological response of human mesenchymal stem cell to anodized titanium discs coated with RGD peptide by physical adhesion and chemical fixation. Materials and methods: Fluorescence isothiocyanate (FITC) modified RGD-peptide was coated on the anodized titanium discs (diameter 12 mm, height 3 mm) using two methods. One was physical adhesion method and the other was chemical fixation method. Physical adhesion was performed by dip and dry procedure, chemical fixation was performed by covalent bond via silanization. In this study, human mesenchymal stem cell was used for experiments. The experiments consisted of surface characteristic evaluation after peptide coating, analysis about cell adhesion, proliferation, differentiation, and mineralization. Obtained data are statistically treated using Kruskal-Wallis test and Bonferroni test was performed as post hoc test (P=.05). Results: The evaluation of FE-SEM images revealed no diffenrence at micro-surfaces between each groups. Total coating dose was higher at physical adhesion experimental group than at chemical fixation experimental group. In cell adhesion and proliferation, RGD peptide coating did not show a statistical significance compared with control group (P>.05). In cell differentiation and mineralization, physical adhesion method displayed significantly increased levels compared with control group and chemical fixation method (P<.05). Conclusion: RGD peptide coating seems to enhance osseointegration by effects on the response of human mesenchymal stem cell. Especially physical adhesion method showed more effective than chemical fixation method on response of human mesenchymal stem cell.

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.791-797
• /
• 2013

This study was conducted to investigate the changes in the composition and microbiological properties of domestic sun-dried salt (white and gray salts) according to their collection time and production method. The results showed that the moisture contents of the white and gray sun-dried salts were 10.4~13.2% and 5.2~8.0%, respectively, and the sand contents were 0.1% and 0.2~0.3%, respectively, according to the month. Several samples exceeded the criteria of 15% moisture content and 0.2% sand content. The ash content and salinity of gray salt (below 85% and 90%, respectively) were higher than those of white salt (both below 80%). The total chloride contents of the salts collected in September and October were slightly lower than that of the others and exceeded the criteria of above 40%. In the case of mineral contents, there was no significant difference among the collection times because the analyses showed a marked deviation. The microbiological analysis showed that there was no significant difference among the production method, but the salt samples collected in September and October had relatively high detection rates of total aerobe, staphylococci, and halophilic bacteria.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.4 s.54
• /
• pp.289-293
• /
• 2005

Nowadays there are many sun protection cosmetics including organic or inorganic UV filter as an active ingredient. Chemically stable inorganic sunsEreen agents, usually metal oxides, we widely employed in high SPF products. Titanium dioxide is one of the most frequently used inorganic UV filters. It has been used as pigments for a long period of cosmetic history. With the development of micronization techniques, it becomes possible to incorporate titanium dioxide in sunscreen formulations without whitening effect and it becomes an important research topic. However, there are very few works related to quantitations of titanium dioxide in sunscreen products. In this research, we analyzed amounts of titanium dioxide in sunscreen cosmetics by adapting redof titration, reduction of Ti(IV) to Ti(III) and reoxidation to Ti(IV). After calcification of other organic ingredients of cosmetics, titanium dioxide is dissolved by hot sulfuric acid. The dissolved Ti(IV) is reduced to the Ti(III) by adding aluminum metals. The reduced Ti(III) is titrated against a standard oxidizing agent, Fe(III) (ammonium iron(III) sulfate), with potassium thiocyanate as an indicator In order to test accuracy and applicability of the proposed method, we analyzed the amounts of titanium dioxide in four types of sunscreen cosmetics, such as cream, make-up base, foundation and powder, after adding known amounts of titanium dioxide $(1{\sim}25w/w%)$. The percent recoveries of the titanium dioxide in four types of formulations were in the range between 96 and 105%. We also analyzed 7 commercial cosmetic products labeled titanium dioxide as an ingredient and compared the results with those of obtained from ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectrometry), one of the most powerful atomic analysis techniques. The results showed that the titrated amounts were well coincided with the analyzed amounts of titanium dioxide by ICP-AES. Although instrumental analytical methods, ICP-MS (Inductively Coupled Plasma-Mass Spectrometry) and ICP-AES, are the best for the analysis of titanium, it is hard to adopt because of their high prices for small cosmetic companies. It was found that the volumetric method presented here gat e quantitative and reliable results with routine lab-wares and chemicals.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.172-178
• /
• 2021

In the ship repair market, interest in maintenance and repair is steadily increasing due to the reinforcement of prevention of environmental pollution caused by ships and the reinforcement of safety standards for ship structures. By reflecting this effect, the number of requests for repairs by foreign shipping companies increases to repair shipbuilders in the Southwest Sea. However, because most of the repair shipbuilders in the southwestern area are small and medium-sized companies, it is difficult to lead to the integrated synergy effect of the repair shipbuilding companies. Moreover, the infrastructure is not integrated; hence, using the infrastructure jointly is a challenge, which acts as an obstacle to the activation of the repair shipbuilding industry. Floating docks are indispensable to operating the repair shipbuilding business; in addition, most of them are operated through renovation/repair after importing aging caisson docks from overseas. However, their service life is more than 30 years; additionally, there is no structure inspection standard. Therefore, it is vulnerable to the safety field. In this study, the finite element analysis program of ANSYS was used to evaluate the structural safety of the modified caisson dock and obtain additional structural reinforcement schemes to solve the derived problems. For the floating docks, there are classification regulations; however, concerning structural strength, the regulations are insufficient, and the applicability is inferior. These insufficient evaluation areas were supplemented through a detailed structural FE-analysis. The reinforcement plan was decided by reinforcing the pontoon deck and reinforcement of the side tank, considering the characteristics of the repair shipyard condition. The final plan was selected to reinforce the side wing tank through the structural analysis of the decision; in addition, the actual structure was fabricated to reflect the reinforcement plan. Our results can be used as reference data for improving the structural strength of similar facilities; we believe that the optimal solution can be found quickly if this method is used during renovation/repair.

• Economic and Environmental Geology
• /
• v.43 no.3
• /
• pp.269-278
• /
• 2010

We investigated characteristics of the coloring material of Dancheong pigments and hope that this study contributes the revival of traditional Dancheong pigments color. For this purpose, we collected Dancheong fragment samples that fell off naturally from old wooden buildings in Gwangju and Jeonnam and analyzed the natural coloring material by XRD and EDS-SEM analysis method. In white pigments of Dancheong fragments, it is confirmed that gypsum$(CaSO_{4}{\cdot}2H_{2}O)$, quartz$(SiO_{2})$, white lead$(PbCO_{3})$ and calcite$(CaCO_{3})$ which have been used for white pigments since ancient times and $TiO_{2}$ which is common used in modern times. In red pigments of Dancheong fragments, it is confirmed that hematite$(Fe_{2}O_{3})$ and red lead$(Pb_{3}O_{4})$, which have been used for red pigments since ancient times and C.I. pigment orange $13(C_{32}H_{24}C_{12}N_{8}O_{2})$ but there is no cinnabar(HgS) which has been used since B.C. 3000 in China. In yellow pigments of Dancheong fragments, it is confirmed that crocoite$(PbCrO_{4})$ and massicot(PbO). In blue pigments of Dancheong fragments, it is confirmed that sodalite$(Na_{4}BeAlSi_{4}O_{12}Cl)$ and nosean $(Na_{8}Al_{6}Si_{6}O_{24}SO_{4})$ as coloring material of blue pigment and C.I. pigments blue $29(Na_{7}Al_{6}Si_{6}O_{24}S_{3})$ which is used in modern times. In green pigments of Dancheong fragments, it is confirmed that calumetite$(Cu(OHCI)_{2}{\cdot}2H_{2}O)$, escolaite(Cr2O3), dichromium trioxide$(Cr_{2}O_{3})$, emerald green$(C_{2}H_{3}As_{3}Cu_{2}O_{8})$, and C.I. pigments green$(C_{32}H_{16}-XCl_{x}Cu_{8})$ which is used in modern time. In black pigments of Dancheong fragments, Chiness ink(carbon black) is confirmed.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.452-460
• /
• 2018

This study was conducted to investigate the physiological activities of Houttuynia cordata extracts and fractions. H. cordata extracts were extracted with 50% ethanol and the ethyl acetate fractions were obtained from the extracts. Minimum inhibitory concentration (MIC) values of the ethyl acetate fraction for S. aureus and B. subtilis were $78{\mu}g/mL$ and $312{\mu}g/mL$, respectively, indicating the high activity against gram-positive bacteria. The free radical scavenging activity ($FSC_{50}$) for 1,1-diphenyl-2-picrylhydrazyl (DPPH) was higher in the ethyl acetate fraction with $12.00{\mu}g/mL$ compared to that of $27.15{\mu}g/mL$ for 50% ethanol extract. The total antioxidant activity ($OSC_{50}$) values for reactive oxygen species (ROS) produced in $Fe^{3+}-EDTA/H_2O_2$ system by a luminol-dependent chemiluminescence method were 2.91 and $0.983{\mu}g/ml$ for the 50% ethanol extract and ethyl acetate fraction, respectively. To investigate cellular protective effects on the HaCaT cell, the intracellular ROS scavenging activity was measured after UVB irradiation and the ethyl acetate fraction of H. cordata showed the activity in a concentration-dependent from $1.6{\mu}g/mL$ and a reduction rate of 54.3% at a maximum concentration of $12.5{\mu}g/mL$. Also, HaCaT cell protective effect against $H_2O_2$-mediated decreased the cell viability of the ethyl acetate fraction of H. cordata which significantly increased the cell viability from $0.8{\mu}g/mL$ and the maximum cell viability showed 86.9%. The ethyl acetate fraction of the H. cordata extracts was analyzed by TLC and HPLC. As a result, quercitrin, isoquercitrin, hyperoside, chlorogenic acid, neochlorogenic acid, cryptochlorogenic acid, rutin and afzelin were identified. From the above results, it was suggested that the extracts and fractions of H. cordata have a potential to be applied in the field of cosmetics as a natural antioxidant/preservative capable of protecting the cell membrane from the oxidative stress by eliminating ROS and exhibiting the antimicrobial effect.