• 실천공학교육논문지
• /
• 제13권2호
• /
• pp.327-332
• /
• 2021

교육용으로 사용되는 피삭재(소재)는 SM20C, Al6061, 아크릴 등의 소재를 사용한다. SM20C 소재는 탄소강으로서 자격증 시험 및 기능경기대회에서 많이 사용되지만 산업현장에서도 많이 사용된다. Al6061 소재는 탄소강에 비하여 경도가 낮아지고 전성(연성)이 강한 소재이기에 공구의 구성인선이 많이 발생하는 소재 라고 한다. 아크릴 소재를 이용하여 학생들에게 실습지도 하면 어느 부분에서 과다 절삭으로 인하여 진동이 발생하고 공구의 파손이 발생하는 소재이다. 이러한 과정에서 5축장비인 2NC헤드에게 가해지는 충격이 정밀도 제어에는 어느정도 영향을 줄 수 있는지 알아본다. 5축장비의 가장 취약한 부분은 AC축을 제어하는 헤드가 가장 약한 부분이라 할 수 있다. 이 부분의 정밀도 및 누적 공차가 발생할 경우 모든 제품의 정밀도가 떨어지는 현상이 발생한다. 따라서 2NC헤드의 핵심적인 부분, 스핀들 하우징은 Al7075 T6(미국 알코아사) 소재를 사용하고 전체 바디는 FCD450 (구상흑연주철) 사용하여 진행하였다. 이 두가지 소재에서 작용되는 진동 및 절삭 과정에서 힘을 극한조건에서 유한요소 해석으로 적용되는 값을 밝혀 내고자 해석을 진행하였다. 이러한 해석 데이터를 활용하여 학생들이 5축절삭 보다 5축 가공기의 구조를 보고 이해하는데 도움이 되기를 기대한다.

• 산업기술연구
• /
• 제19권
• /
• pp.25-29
• /
• 1999

Rotary bending fatigue tests were carried out to investigate the fatigue behavior of high performance ductile cast iron experienced super rapid induction heat treatment. The effect of super rapid induction treatment on fatigue limit was experimentally examined with the special focus on the variation surface microstructure and the fatigue crack initiation and propagation through fractography. Main results obtained are as follows. By super rapid induction treatment in FCD500, the martensite structure obtained through conventional quenching heat treatment was confirmed on the specimen surface. The fatigue crack initiation in the hardened surface layer was restricted by the martensite structure and compressive residual stress. Thus, it could be interpreted that the initiation stress would be increased by the improvement of surface structure. The fatigue crack propagation in the hardened layer was retarded by the presence of the globular shape martensite around the graphite nodule and compressive residual stress. The crack propagation path has shown zigzag pattern in the hardened surface layer.

• 아동학회지
• /
• 제33권1호
• /
• pp.183-203
• /
• 2012

While efforts to measure and monitor children's well-being have gained increasing recognition across the OECD, there has been relatively little research on the subject of indicators of children's well-being in Korea. This study was undertaken in order to develop the domains and indicators which can be used to measure the quality of life of Korean children from birth to age 17 and to put forward a possible well-being index for Korean children. The 35 indicators of well-being were grouped into eight domains and were designed for this study, using previous research on key child indicators for Korea and the child well-being index in foreign countries, such as the FCD-Land Index, Kids Count, the index of child well-bing in the European Union and OECD area. These domains are composed of the following : economic well-being, health, education, spiritual/emotional well-being, children's relationships, civic participation, safety/risk behavior, and housing and environment. The establishment of a Korean children's well-being index requires access to and use of national statistical data analyzed annually by the government as well as a general consensus regarding such issues as scope and its indicators.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2005년도 추계학술대회
• /
• pp.257-270
• /
• 2005

Many studies states that improperly uprising of infrastructure may cause leading the forest degradation and canopy reduction in many tropical forest of Asian countries. Other studies revealed that habitat destruction and fragmentation, edge effects, exotic species invasions, pollution are provoked by roads. Similarly, environmental effects of road construction in forests are problematic. Similarly, many researches have been indicated that roads have a far greater impact on forests than simply allowing greater access for human use. Moreover, people using river as means of transportation hence illegal logging and felling cause canopy depletion in many countries. Therefore, it is important to comprehend the study about spatial relation of road, river and suburb followed by temporal change of forest canopy phenomena. This study also tried to examine the effect of road, river and suburb in forest canopy density change of Terai forest of Nepal from you 1988 to 2001. So, Landsat TM88, 92 and 001 and FCD (Forest Canopy Density) mapper were used to perform the spatial .elation of canopy density change. ILWIS (Integrated Land and Water Information System) which is GIS software and compatible with remote sensing data was used to execute analysis and visualize the results. Study found that influence of distance to suburb and river had statistically significance influenced in canopy change. Though road also influenced canopy density much but didn't show a statistical relation. It can be concluded from this research that understanding of spatial relation of factors respect with canopy change is quite complex phenomena unless detail analysis of surrounding environment. Hence, it is better to carry out comprehensive analysis with other additional factors such as biophysical, anthropogenic, social, and institutional factors for proper approach of their effect on canopy change.

• 소성∙가공
• /
• 제29권4호
• /
• pp.203-210
• /
• 2020

In this study, formability and springback behavior of 1.5 GPa grade ultra-high strength steel (UHSS) sheet were predicted through the finite element simulation, and structural stability of the forming dies was verified by the coupled forming-structural analysis. Uniaxial tension and uniaxial tension-compression tests were performed to obtain experimental data for modeling the springback properties of the sheet material. The springback values predicted by simulation were compared with those from actual measurements. The results calculated from the kinematic hardening model were found to be much more accurate than those from the isotropic hardening model. Deformation of the forming die and springback of the product were calculated by the coupled forming-structural analysis. The higher the strength of the die material, the smaller the surface displacement of the die and the springback of the product. The internal stresses of the dies made of three materials, FC300, FCD550 and STD11 were compared with the yield stress of each material. The results provided a basis for determining the most suitable material for each part of the die set. As a result, simulation techniques have been established for predicting formability and springback in the UHSS sheet forming process.

• Journal of Korean Neurosurgical Society
• /
• 제41권6호
• /
• pp.397-402
• /
• 2007

Objective : Balloon cells and dysplastic neurons are histopathological hallmarks of the cortical tubers of tuberous sclerosis complex [TSC] and focal cortical dysplasia [FCD] of the Taylor type. They are believed to be the epileptogenic substrate and cause therapeutic drug resistant epilepsy in man. P-glycoprotein [P-gp] is the product of multidrug resistance gene [MDR1], and it maintains intracellular drug concentration at a relatively low level. The authors investigated expression of P-gp in balloon cells and dysplastic neurons of cortical tubers in patients with TSC. Methods : An immunohistochemical study using the primary antibody for P-gp, as an indicative of drug resistance, was performed in the cortical tuber tissues in two patients of surgical resection for epilepsy and six autopsy cases. Results : Balloon cells of each lesion showed different intensity and number in P-gp immunopositivity. P-gp immunopositivity in balloon cells were 28.2%, and dysplastic neurons were 22.7%. These immunoreactivities were more prominent in balloon cells distributed in the subpial region than deeper region of the cortical tubers. Capillary endothelial cells within the cortical tubers also showed P-gp immunopositivity. Conclusion : In this study, the drug resistance protein P-glycoprotein in balloon cells and dysplastic neurons might explain medically refractory epilepsy in TSC.

• 한국식품과학회지
• /
• 제47권6호
• /
• pp.711-718
• /
• 2015

대추 추출물로부터 식초를 생산하기 위한 발효공정의 최적 조건을 연구하였다. 아세트산 세균을 이용한 발효 공정의 조절 변수로 초기 세균수, 에탄올의 농도, 대추 추출물의 농도, 온도, pH를 고려하여 반응 표면 분석법을 통해 분석하였다. FCD 기반의 통계 분석을 통해, 영향이 낮은 것으로 나타난 초기 세균수와 대추 추출물의 농도는 고려요소에서 제거한 다음, 아세트산 생성과 최대 산도를 얻을 수 있는 발효 공정 최적 조건을 탐색하였다. 최대 산도와 최대 아세트산 생성 조건에 대해 각각 $R^2$값이 0.71, 0.78로 나타난 반응 표면 회기식 분석을 통해 7.69% 에탄올을 함유한 25%의 대추 추출물로부터 $21.75^{\circ}C$에서의 아세트산 발효를 통해 52.76 mg/mL의 아세트산을 생산하는 것이 최대 효율 공정으로 예측되었으며 이를 실험을 통해 검증하였다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제2권8호
• /
• pp.571-578
• /
• 2013

국제수로기구(IHO)의 공간지리 공통 데이터 모델에 관한 표준인 S-100을 기반으로 하는 S-10x 데이터 제품사양(Product Specification)은 해양의 특정 분야 데이터를 제작, 배포하는 기준에 관한 표준이다. 전자해도 데이터와 같은 피처 중심의 데이터는 피처 카탈로그를 S-10x 데이터 제품사양의 주요 구성 요소로 포함한다. 피처 카탈로그는 대상 분야 및 대상 분야의 데이터에 관한 전문 지식을 갖춘 도메인 전문가에 의해 제작되어 진다. 그러나 도메인 전문가가 피처 카탈로그를 구조화된 XML 문서로 오류 없이 작성하는 것은 쉬운 일이 아니다. 국제수로기구의 TSMAD 워킹그룹 회의에서도 카탈로그의 제작을 지원하는 시스템 개발의 필요성을 제기하였다. 이에 본 논문에서는 도메인 전문가가 S-10x 제품사양의 피처 카탈로그를 일관되고 구조화된 XML 문서로 제작할 수 있도록 지원하는 시스템 도구로 피처 카탈로그 빌더를 설계, 구현하였다. 피처 카탈로그 빌더는 자바 기반의 그래픽 유저 인터페이스(GUI) 프로그램으로 개발하였다. 그리고 피처 개념 사전(Feature Concept Dictionary) 레지스터의 등록 아이템 간의 관계를 확인하고 대상 분야에 적합한 아이템을 선택할 수 있도록 피처 카탈로그 빌더를 개발하였다.