• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.1
• /
• pp.76-85
• /
• 2012

Air traffic controllers often experience fatigue and stress on the job due to work-related factors. Performance impairment resulting from fatigue and stress is an important concern for aviation safety. The goal of this research was to investigate fatigue and stress factors for air traffic controllers. The research involved an extensive literature review of fatigue and stress in the air traffic control environment and surveyed fatigue and job stress level of Korean air traffic controllers compared to other occupation groups. Results of survey showed that fatigue and stress levels of air traffic controllers were significantly higher than other occupation groups. Specially air traffic controllers reported that night work created high level of fatigue and perceived that physical environment and job demand induced high level of stress. In addition, implications for fatigue and stress management were discussed.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.6
• /
• pp.463-469
• /
• 2015

Fatigue in the metal used as hull material has always been an important issue. The fatigue phenomenongenerally occurs suddenly in a ship hull, and always causesa large number of casualties and economic losses. This paper presents a study of an assessment method for the fatigue life based on Li’s approach using MSC Fatigue. The details of Li’s approach based on MSC Fatigue are provided. Based on the results of this study, it can be concluded that Li’s approach has several advantages: (1) it allows the wide application of different structural details, (2) is easy to use, and (3) provides accurate results. Finally, Li’s approach can be proven to be feasible for a ship’s fatigue analysis.

• Composites Research
• /
• v.12 no.2
• /
• pp.62-69
• /
• 1999

During fatigue loading of composite materials, damage accumulation can be monitored by measuring their material properties. In this study, fatigue modulus is used as the damage index. Fatigue life of composite materials may be predicted analytically using damage models which are based on fatigue modulus and resultant strain. Damage models are propesed as funtions of applied stress level, number of fatigue cycle and fatigue life. The predicted life was comparable to the experimental result obtained using E-glass fiber reinforced epoxy resin materials and pultruded glass fiber reinforce polyester composites under two-stress level fatigue loading.

• Structural Engineering and Mechanics
• /
• v.44 no.4
• /
• pp.417-429
• /
• 2012

Taking the superficial temperature increment as the major fatigue damage indicator, the infrared thermography was used to predict fatigue parameters (fatigue strength and S-N curve) of welded joints subjected to fatigue loading with a high mean stress, showing good predictions. The fatigue damage status, related to safety evaluation, was tightly correlated with the temperature field evolution of the hot-spot zone on the specimen surface. An energetic damage model, based on the energy accumulation, was developed to evaluate the residual fatigue life of the welded specimens undergoing cyclic loading, and a good agreement was presented. It is concluded that the infrared thermography can not only well predict the fatigue behavior of welded joints, but also can play an important role in health detection of structures subjected to mechanical loading.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.3
• /
• pp.58-64
• /
• 2006

The security of stability for fractures of all sorts of parts and structure has become a first subject these days. We have need to organize fatigue characteristics of weldment because fatigue break out suddenly without a change of shape. In this study, we execute the fatigue test according to different of the welding method at the same materials. It was investigated about a fatigue limit according to welding methods of SMAW, FCAW and SAW at normal temperature and a frequency of 10Hz. The important results of the experimental study on fatigue characteristics of weldment are as follows: The fatigue limit of welding methods became low in the order of SMAW, FCAW, SAW.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.239-245
• /
• 2005

Through the fatigue test of plastic gears using polyacetal polymer, this research aims at providing basic data for not only specifying operation conditions of plastic gears, but also designing dimensions of plastic gears with giving fatigue life and the estimated equation of fatigue life of plastic gears. That is, from the fatigue life curves, the estimated equation of fatigue life of plastic gears is taken out. For the estimated equation of fatigue life of plastic gears, this research provides two test methods; one is preserving non-limited temperature of tooth flank, the other is preserving limited temperature of tooth flank. As results, how the temperature of tooth flank affects the fatigue life is shown. In addition, based on the endurance limit, the essential factors of the unit load and K-factor are determined, which are needed in the design of gear by bending strength and surface durability.

• Journal of Korean Academy of Nursing
• /
• v.35 no.4
• /
• pp.701-708
• /
• 2005

Purpose. This study examined the characteristics of fatigue and the relationship between fatigue and its related factors in Korean patients on hemodialysis. Methods. A cross-sectional correlational study was conducted with 104 patients on hemodialysis in Seoul, Korea. Finding. Of a total of 104 subjects, eighty-one ($77.9\%$) complained of fatigue. Fatigue severity was measured by the self-rating Visual Analogue Scale-Fatigue (VAS-F) with a mean score of 36.5 (SD = 17.49, range 2 - 81). The mean duration of fatigue was 3.8 hours (SD = 5.3, range 0 - 24). Depression was most significantly correlated with fatigue (beta = .43, p<.00), with interdialytic weight gain (beta = .25, p<.05) being the second most significant correlate. Conclusion. This study shows that nursing interventions for patients who experience fatigue while on hemodialysis should be focused on both psychological problems, such as depression, as well as on physiological problems, such as interdialytic weight gain.

• Journal of the Korean Society of Safety
• /
• v.11 no.3
• /
• pp.154-159
• /
• 1996

In this thesis, a series of loading tests are conducted in order to investigate the fracture safety of GFRP(Glass Fiber Reinforced Plastics) pipes under fatigue load which are widely used in the developed countries becauses of their natural of anticorrosion and lightweight etc. . Fatigue test is performed by changing number of laminates and loading cycles to examine the flexural strains, the ductility and the fatigue strength for two million repeated loading cycles. From the fatigue test results, it was found that the larger the laminates of GFRP pipes is, the larger the stiffness of GFRP pipes under the fatigue load increases. This phenomenon is true until the fatigue failure. According to the S-N curve drawn by the regression analysis on the fatigue test results, the fatigue strength of percent of the static ultimate strength increases by increasing the laminates of GFRP pipes. The fatigue strength with two million repeated leading cycles in GFRP pipes with the laminates of GFRP pipes varing 15, 25, 35 shows about 75%, 80%, 84% on the static ultimate strength, respectively.

• Journal of Welding and Joining
• /
• v.27 no.6
• /
• pp.49-54
• /
• 2009

In this study, the numerical analysis model for fatigue life prediction of welded structures are presented. In order to evaluate the structural degradation of welded structures due to fatigue loading, continuum damage mechanics approach is applied. Damage evolution equation of welded structures under arbitrary fatigue loading is constructed as a unified plasticity-damage theory. Moreover, by integration of damage evolution equation regarding to stress amplitude and number of cycles, the simplified fatigue life prediction model is derived. The proposed model is compared with fatigue test results of T-joint welded structures to obtain its validation and usefulness. It is confirmed that the predicted fatigue life of T-joint welded structures are coincided well with the fatigue test results.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.61-67
• /
• 2000

Gears are the most commonly used parts in automotive and industrial applications. One of most common modes of gear failures is tooth breakage, which is usually produced by the bending fatigue failure. It is important to manufacture the gears which can withstand the applied stresses in view of safety and economic requirement. This paper deals with bending fatigue strength for cold forged bevel gear. Especially, to compare fatigue characteristics for manufacturing processes difference, bending fatigue tests of bevel gears made by three different processes respectively. Results indicate that the fatigue strength of bevel gear is improved by cold forging process. Intergranular fracture is found on fatigue fracture surface, and dimples are observed on final fracture surface. The fatigue failure cannot be considered as a deterministic quantity, but must be characterized statistically. This study proposes a method to estimate bending fatigue lift of the bevel gear using the probability-load-life and Weibull analysis.