• Title/Summary/Keyword: FAST system

Search Result 5,901, Processing Time 0.037 seconds

Computer simulation to determine system parameters of the square-wave adapted fast impedance analyzer for the electrode - electrolyte interface analysis (구형파를 이용한 전극계면 분석용 고속 임피던스 분석기의 설계변수 확정을 위한 컴퓨터 시뮬레이션)

  • Kim Gi-Ryon;Kim Gwang-Nyeon;Shim Yoon-Bo;Jeon Gye-Rok;Jung Dong-Keun
    • Journal of the Korea Society for Simulation
    • /
    • v.14 no.2
    • /
    • pp.45-55
    • /
    • 2005
  • There are electric double layer capacitance, polarization resistance and solution resistance in the interface between electrode and solution. Electrode process could be evaluated by the electrical impedance analysis. The necessities of the electrochemical cell analysis with high speed impedance analyzer are followings: minimization of the effects of electric stimulation on electrochemical cell and the concentration of reactive materials, and optimization of impedance signal resolution. This paper represents the design criteria for the selection and stimulation to develop fast impedance analyzer prototype for a electrochemical cell. It was suggested that the design of 470k sample/s sampling rate, 13 bit ABC resolution, and 140ms recording time is required for high speed impedance analysis system in frequency range between dc and 10kHz.

  • PDF

Fast Anti-collision Algorithm for Improving Tag Identification Speed in EPC Class 1 RFID System (EPC Class 1 RFID 시스템에서 태그 인식 속도 향상을 위한 고속 태그 충돌 방지 알고리즘)

  • Lee, Choong-Hee;Kim, Jae-Hyun
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.6B
    • /
    • pp.450-455
    • /
    • 2008
  • We analyze the tag identification procedure of conventional EPC Class 1 RFID system and propose the fast anti-collision algorithm for the performance improvement of the system. In the proposed algorithm, the reader uses information of tag collisions and reduces unnecessary procedures of the conventional algorithm. We evaluate the performance of the proposed anti-collision algorithm and the conventional algorithm using mathematical analysis and simulation. According to the results, the fast anti-collision algorithm shows greatly better performance than conventional algorithm.

Development of Nonlinear Inverter Model for Fast Dynamic Analysis of Electric Power Steering with PMSM Drive System (자동차 전자식 조향장치용 PMSM 구동 시스템의 신속한 동적해석을 위한 비선형 인버터 모델 개발)

  • Choi, Chin-Chul;Lee, Woo-Tiak;Hong, Jeong-Pyo
    • Proceedings of the KIEE Conference
    • /
    • 2007.07a
    • /
    • pp.1132-1133
    • /
    • 2007
  • A circuit-domain model of PWM inverter provides accurate simulation results in consideration of detail switching characteristics. Although, a huge amount of computation time is demanded for the simulation results of several ten seconds, which is the required time to analyze system behaviors or control performances of Electric Power Steering(EPS) on real drive condition. This paper describes the nonlinear inverter model for fast dynamic simulation of EPS without the PWM concept through analyzing the effect of nonlinear switching characteristics like dead time, forward voltage drop and conduction resistance. Some inverter models including proposed model are compared from two standpoints which are computation time and accuracy. The comparison results show the usefulness of the developed model in order to develop the control algorithm through the fast prediction of system behaviors.

  • PDF

Design of HUST-PTF beamline control system for fast energy changing

  • Li, Peilun;Li, Dong;Qin, Bin;Zhou, Chong;Han, Wenjie;Liao, Yicheng;Chen, Aote
    • Nuclear Engineering and Technology
    • /
    • v.54 no.8
    • /
    • pp.2852-2858
    • /
    • 2022
  • A proton therapy facility is under development at Huazhong University of Science and Technology (HUST). To meet the need for fast energy changes during treatments, a beamline control system (BCS) has been designed and implemented. The BCS coordinates and controls various beamline devices by adopting a distributed architecture divided into three layers: the client, server, and device layers. Among these, the design of the server layer is the key to realize fast energy changes. The server layer adopts the submodule programming paradigm and optimizes the data interface among modules, allowing the main workflow to be separated from the device workflow and data. Furthermore, this layer uses asynchronous, multithreaded, and thread-locking methods to improve the system's ability to operation efficiently and securely. Notably, to evaluate the changing energy status over time, a dynamic node update method is adopted, which can dynamically adjust the update frequency of variable nodes. This method not only meets the demand for fast updates on energy changes but also reduces the server's communication load in the steady state. This method is tested on a virtual platform, and the results are as expected.

Throughput Analysis of Multi-Carrier DS-CDMA System in Rayleigh Fading Channels (레일리 페이딩 채널에서 Multi-Carrier DS-CDMA 시스템의 Throughput 해석)

  • 김영철;노재성;강희조;조성준
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.5 no.6
    • /
    • pp.1066-1072
    • /
    • 2001
  • ALOHA Multi-Carrier DS-CDMA systems in the multipath Rayleigh fading channel. The throughput of two systems are compared according to the length of a packet in the fast Rayleigh and the slow Rayleigh multipath fading. As a result, we have known that Multi-Carrier DS-CDMA system has less capacity than wideband DS-CDMA system in the same bandwidth, but throughput of Multi-Carrier DS-CDMA system is higher than that of wideband DS-CDMA system. And in Multi-Carrier DS-CDMA systems, higher throughput can be obtained through shortening the length of packet in the fast Rayleigh fading, and it is efficient to control the length of a packet adequately or increase the system capacity of Multi-Carrier DS-CDMA system in the slow Rayleigh fading.

  • PDF

Active Vibration Control of a Plate Using TMS320C6713DSK

  • Choi, Hyeung-Sik;You, Sam-Sang;Her, Jae-Gwan;Seo, Hae-Yong;Tran, Ngoc-Huy
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.35 no.3
    • /
    • pp.309-316
    • /
    • 2011
  • This paper deals with the experimental study of the vibration suppression of the smart structures. First, a new high-speed active control system is presented using the DSP320C6713 microprocessor. A peripheral system developed is composed of a data acquisition system, A/D and D/A converters, piezoelectric (PZT) actuator/sensors, and drivers using PA 95 for fast data processing. Next, the processing time of the peripheral device is tested and the corresponding test results are provided. Since fast data processing is very important in the active vibration control of the structures, achieving the fast loop times of the control system is focused. The control algorithm using PPF in addition to FIR filter is implemented. Finally, numerous experiments were carried out on the aluminum plate to validate the superior performance of the vibration control system at different control loop times.

Algorithm of intelligent SPS with applying fast-valving and braking resistor (Fast-valving과 Braking resistor 적용을 통한 지능형 SPS 알고리즘 구현)

  • Kim, Kab-Yong;Yoon, Dong-Hee;Jang, Gil-Soo;Moon, Young-Hwan;Kim, Seog-Joo;Seo, Sang-Soo
    • Proceedings of the KIEE Conference
    • /
    • 2011.07a
    • /
    • pp.280-281
    • /
    • 2011
  • Special Protection Scheme(SPS) that operates scenarios about faults beyond the normally protective action is wide system protection technology for the purpose of wide areas protection. Therefore, the SPS focuses on the improvement of the power supply capability by protecting the system rather than protecting the system equipments. Since the SPS requires emergency operation, the operation schedule is set up in advance by analyzing various scenarios. Since the SPS's action scheme uses generator tripping and is a classical method it is presently the most powerful one. However, as the setting of SPS is set to the most severe disturbance, the scheme tends to trip more generators than required to prevent fault propagation. It is highly likely that tripping generator units to prevent fault propagation would result in difficulty of system management and possibility of load shedding. Accordingly, it is desirable that generators are connected to the system within the range that ensures system stability and intelligent SPS is currently under development to solve the problem being stated. In this paper, as a part of developing the intelligent SPS, application of the fast-valving and braking resistor scheme to the generators is being proposed and analysed to reduce the number of tripped generators.

  • PDF

Design of the Step-stare Image Gathering System for an Aerial Reconnaissance (항공 정찰용 Step-stare 영상획득 시스템 설계)

  • Baek, Woonhyuk;Park, Jaeyoung;Ahn, Junghun;Lee, Jungsuk
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.31 no.9
    • /
    • pp.813-820
    • /
    • 2014
  • This paper presents design and performance validation of a method for motion compensation using fast steering mirror. First of all, the schematics of the Electro Optical/Infra-Red (EO/IR) and step-stare image gathering system for an aerial reconnaissance are introduced. Because of the steering mirror with low inertia so called Back scan mechanism (BSM), the fast step-stare image gathering technique that is required for taking a high-definition still image will be realized. After then, the BSM hardware includes motors and feedback sensors are introduced. Also, the motion profile for BSM will be designed to compensate roll scan motion of the gimbals. At the end of this paper, designed profile and tracking performance of the EO/IR system with BSM will be validated through experiments.

Voltage Stability Prediction on Power System Network via Enhanced Hybrid Particle Swarm Artificial Neural Network

  • Lim, Zi-Jie;Mustafa, Mohd Wazir;Jamian, Jasrul Jamani
    • Journal of Electrical Engineering and Technology
    • /
    • v.10 no.3
    • /
    • pp.877-887
    • /
    • 2015
  • Rapid development of cities with constant increasing load and deregulation in electricity market had forced the transmission lines to operate near their threshold capacity and can easily lead to voltage instability and caused system breakdown. To prevent such catastrophe from happening, accurate readings of voltage stability condition is required so that preventive equipment and operators can execute security procedures to restore system condition to normal. This paper introduced Enhanced Hybrid Particle Swarm Optimization algorithm to estimate the voltage stability condition which utilized Fast Voltage Stability Index (FVSI) to indicate how far or close is the power system network to the collapse point when the reactive load in the system increases because reactive load gives the highest impact to the stability of the system as it varies. Particle Swarm Optimization (PSO) had been combined with the ANN to form the Enhanced Hybrid PSO-ANN (EHPSO-ANN) algorithm that worked accurately as a prediction algorithm. The proposed algorithm reduced serious local minima convergence of ANN but also maintaining the fast convergence speed of PSO. The results show that the hybrid algorithm has greater prediction accuracy than those comparing algorithms. High generalization ability was found in the proposed algorithm.

Design and Implementation of the Parallel Multimedia File System on Fast Ethernet (Fast Ethernet 환경에서 병렬 멀티미디어 파일 시스템의 설계와 구현)

  • Park, Seong-Ho;Kim, Gwang-Mun;Jeong, Gi-Dong
    • The KIPS Transactions:PartB
    • /
    • v.8B no.1
    • /
    • pp.89-97
    • /
    • 2001
  • 대용량 멀티미디어 미디어 서버를 구성함에 있어 I/O 병목현상을 극복하기 위하여 저장 서버들과 제어 서버로 구성되어진 2계층 분산 클러스터 서버구조가 많이 사용된다. 2 계층 분산 클러스터 서버는 부하 균등, 대역폭 관리 및 저장 서버의 관리 측면에서 유리한 반면, 저장 서버와 제어 서버간의 통신 오버헤드를 발생시킨다. 이러한 오버헤드를 줄이기 위해서는 저장 서버에서 읽은 미디어 데이터를 제어 서버를 거치지 않고 직접 클라이언트에 전송할 수 있어야 한다. 그리고, 저장 용량을 확장하거나 손상된 디스크를 교체하는 경우를 대비하여 분산 클러스터 서버는 다양한 성능의 이기종 디스크를 지원하여야 한다. 또한, I/O 장치와 운영체제가 빠르게 발전됨에 따라 미디어 서버는 새로운 I/O 장치 및 운영체제 등에 쉽게 이식될 수 있어야 하고, 응용 소프트웨어 개발자가 시스템의 환경에 따라 블록크기, 데이터 배치정책, 사본 정책 등을 유연하게 조절할 수 있어야 한다. 본 논문에서 위에서 언급한 멀티미디어 서버의 요구를 고려하여 Fast Ethernet 환경에서 병렬 멀티미디어 파일 시스템(PMFS : Parallel Multimedia File System)을 설계 및 구현하고 실험을 통해 PVFS(Parallel Virtual File System)와 성능을 비교 분석하였다. 이 실험의 결과에 따르면 PMFS는 멀티미디어 데이터에 대하여 PVFS보다 3%∼15%의 향상된 성능을 보였다.

  • PDF