• Clinical and Experimental Pediatrics
• /
• 제64권6호
• /
• pp.293-300
• /
• 2021

Background: Understanding the epidemiology and prevalence of febrile urinary tract infection (fUTI) in children is important for risk stratification and selecting appropriate urine sample collection candidates to aid in its diagnosis and treatment. Purpose: This study aimed to analyze the epidemiology, etiology, and changes in antibiotic susceptibility patterns of the first fUTI in children. Methods: This retrospective observational cohort study included children younger than 19 years of age who were diagnosed and treated for their first fUTI in 2006-2016. Electronic medical records were analyzed and radiologic images were evaluated. Results: A total of 359 patients (median age, 5.1 months; interquartile range, 3.0-10.5 months) fit the inclusion criteria; of them, 78.0% (n=280) were younger than 12 months old. The male to female ratio was 5.3:1 for patients aged 0-2 months, 2.1:1 for those 3-5 months, and 1.6:1 for those 6-11 months. Beyond 12 months of age, there was a female predominance. Escherichia coli was the leading cause (83.8%), followed by Enterococcus species (6.7%), and Klebsiella pneumoniae (3.6%). Significant yearly increases in the proportions of multidrug-resistant strains (P<0.001) and extended-spectrum beta-lactamase (ESBL) producers (P<0.001) were observed. In patients with vesicoureteral reflux (VUR), the overall recurrence rate was 53.6% (n=15). A significantly higher recurrence rate was observed when the fUTI was caused by an ESBL versus non-ESBL producer (75.0% vs. 30.0%, P=0.03). Conclusion: fUTI was most prevalent in children younger than 12 months of age and showed a female predominance in patients older than 12 months of age. The proportion of ESBL producers causing fUTI is increasing. Carbapenems, rather than noncarbapenems, should be considered for treating fUTI caused by ESBL-producing enteric gram-negative rods to reduce short-term recurrence rates in children with VUR.

• Carbon letters
• /
• 제4권4호
• /
• pp.185-191
• /
• 2003

Two types of carbon fiber based high modulus- and isotropic-pitch were exposed to isothermal oxidation in air and $CO_2$ gas and the weight change was measured by TGA apparatus. The kinetic equation was introduced $f=1-{\exp}(-at^b)$ and the constant b was obtained in the range of 1.02~1.68 for the isotropic fiber and obtained 0.91~1.93 for the high modulus fiber respectively. In considering the effect of the atmosphere for isothermal oxidation, the value of the constant b obtained in the carbon dioxide was higher than that obtained in the air. Therefore, it was found that the pitch based carbon fiber shows sigmoidal characteristic when it is oxidized in the carbon dioxide. In addition, it was also found that $k_f = 0.5$, which was reaction constant at f = 0.5, was a very useful parameter for evaluation of the oxidation reactivity of pitch based carbon fibers. According to the consideration, it is suggested that the conversion-time curves of the pitch based carbon fibers are correlated by normalized equation $f=1-{\exp}(-A{\tau}^B)$, where ${\tau}=t/t_f= 0.5$.

• 한국세라믹학회지
• /
• 제23권4호
• /
• pp.1-10
• /
• 1986

The crystallization behaviour and the machinability of mica glass-ceramics with the content of F1 were studied. The material was made from the $K_2O-MgO-Al_2O_3-B_2O_3-SiO_2-F$ glasses by the heattreatment at 80$0^{\circ}C$-110$0^{\circ}C$ where the content of F-1 was changed in the range from 1, 3wt% to 6.1wt%. X-ray diffraction phase analysis and optical observation were adopted to study the crystallization behaviour. The machinability was measured by a manual sawing test and MOR. The crystal phases of these glass-ceramics identified by XRD were chondrodite fluoborite and norbergite at low temperature but fluorophlogopite at high temperature. The crystallization of glasses containing 1.3wt% -2.5wt% F-1 were predominately controlled by surface crystallization while the crystallization of glasses containing 3.8 wt% -6.1wt% F-1 were controlled by volume crystallization. Among the test the best machinability and strength value were obtained from those specimens contained fluoride 4.2wt% -4.4wt% and when the heattreatment was performed at 95$0^{\circ}C$-110$0^{\circ}C$ for 2 hours.

• 마이크로전자및패키징학회지
• /
• 제10권2호
• /
• pp.13-17
• /
• 2003

본 연구에서는 $ZnWO_4-LiF$계를 이용하여 RF모듈 구현을 위한 새로운 조성의 LTCC 소재를 개발하고자 하였다. 순수 $ZnWO_4$의 경우 98% 이상의 상대밀도를 얻기 위해서는 $1050^{\circ}C$이상의 소결온도가 필요하였고 소결체의 고주파유전특성은 유전율($\epsilon_r$) 15.5, 품질계수($Q{\times}f0$) 74000 GHz, 공진주파수 온도계수$(\tau_f)-70ppm/^{\circ}C$이었다. $ZnWO_4$에 LiF의 첨가는 상호 반응에 의해 $810^{\circ}C$ 부근에서 액상을 형성하였고 따라서 0.5에서 1.5 wt%의 LiF의 첨가로 $ZnWO_4$를 $820^{\circ}C$에서 치밀화를 얻을 수 있었다. 주어진 LiF의 첨가범위에서 소결 수축률은 LiF 량의 증가와 함께 증가하였다. LiF의 첨가는 LiF 자체의 낮은 유전율에 의해 유전율을 15.5에서 14.2∼15의 범위로 감소시켰으며 품질계수($Q{\times}f0$)도 LiF와 $ZnWO_4$의 반응 및 미세구조의 불균일화로 LiF의 첨가량의 증가와 함께 낮아지는 경향을 보였다.

• 대한음성학회지:말소리
• /
• 제67호
• /
• pp.33-60
• /
• 2008

The aim of this study is to show the differences in acoustic parameters between a pathological voice /a/ caused by vocal polyp and a normal voice /a/ produced after LMS (Laryngeal Microscopic Surgery). It was expected that voices of two kinds could be analyzed effectively in terms of HNR in specific frequency bands than in all frequency bands. For this study, 10 patients' voice were recorded before and after LMS and then were manipulated in terms of four acoustic parameter. It was found out that (a) frequency bands of 500Hz in the range of 1,000Hz to 4,000Hz were very useful to obtain HNR values; (b) frequency bands in the range of 1,248Hz to 5,500Hz on a log scale were very useful to obtain HNR values; (c) F0 dropped after LMS but not significantly; (d) the bandwidth of the second formant (B2) decreased significantly after LMS, while that of the first formant (B1) decreased after LMS but not significantly.

• 전기화학회지
• /
• 제6권2호
• /
• pp.158-160
• /
• 2003

We have reported to make nanostructured cobalt oxide electrode that have large capacitance over than 400 F/g (specific capacitance) and good cycleability. But, it had serious demerits of low voltage range under 0.5 V and low power density. Therefore, we need to increase voltage range of cobalt oxide electrode. We report here on the electrochemical properties of sol-gel-derived nanoparticulate cobalt xerogel in 1M KOH solution and aqueous polymeric gel electrolyte. In solution electrolyte, cobalt oxide electrode had over 250 F/g capacitance consisted of EDLC and pseudocapacitance. In gel electrolyte, cobalt oxide electrode had around 100 F/g capacitance. This capacitance was only electric double layer capacitance of active surface area. In solution electrolyte, potassium ion as working ion reacted with both of layers easily. However, In gel electrolyte, reacted with only surface-active layer. Itis very hard to reach resistive layer. So, we have studied on pretreatment of electrode to contain working ions easily. We'll report more details.

• 한국세라믹학회지
• /
• 제18권1호
• /
• pp.35-40
• /
• 1981

The kinetics of the dehydration of Ha-dong kaolin was studied isothermally at various temperatures. Dehydration rate was measured by thermogravimetry method in the temperature range of 440~50$0^{\circ}C$ and the particle size range of 170~325mesh. The general equation f($\alpha$)=kt, where $\alpha$ is the fraction reacted in the time and the function f($\alpha$) depends on the reaction mechanism, was applied to this reaction. The function, f($\alpha$) was obtained by application of reduced-time plot and plot of lnln (1-$\alpha$) vs. ln (time), and expressed as (1-$\alpha$) ln (1-$\alpha$)+$\alpha$=kt. The dehydration followed the diffusion-controlled reaction model and gave activation energy of 30Kcal/mole.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.93-96
• /
• 2001

We have reported to make nanostructured cobalt oxide electrode that have large capacitance over than 400F/g (specific capacitance) and good cycleability. But, It had serious demerits of low voltage range under 0.5V and low power density. Therefore, we need to increase voltage range of cobalt oxide electrode. we report here on the electrochemical properties of sol-gel-derived nanoparticulate cobalt xerogel in 1M KOH solution and aqueous polymeric gel electrolyte. In solution electrolyte, cobalt oxide electrode had over than 250F/g capacitance consisted of EDLC and pseudocapacitance. In gel electrolyte, cobalt oxide electrode had around l00F/g capacitance. This capacitance was only surface EDLC. In solution electrolyte, potassium ion as working ion reacted with both of layers easily. However, In gel electrolyte, reacted with only surface-active layer. Its very hard to reach resistive layer. So, we have studied on pretreatment of electrode to contain working ions easily. We'll report more details.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.93-96
• /
• 2001

We have reported to make nanostructured cobalt oxide electrode that have large capacitance over than 400F/g (specific capacitance) and good cycleability. But, It had serious demerits of low voltage range under 0.5V and low power density. Therefore, we need to increase voltage range of cobalt oxide electrode. we report here on the electrochemical properties of sol-gel-derived nanoparticulate cobalt xerogel in 1M KOH solution and aqueous polymeric gel electrolyte. In solution electrolyte, cobalt oxide electrode had over than 250F/g capacitance consisted of EDLC and pseudocapacitance. In gel electrolyte, cobalt oxide electrode had around 100F/g capacitance. This capacitance was only surface EDLC. In solution electrolyte, potassium ion as working ion reacted with both of layers easily. However, In gel electrolyte, reacted with only surface-active layer. Its very hard to reach resistive layer. So, e have studied on pretretmetn of electrode to contain working ions easily. We'll report more details.

• 한국정보통신학회논문지
• /
• 제15권8호
• /
• pp.1791-1796
• /
• 2011

가우스 광분포를 가지는 KrF 엑시머 레이저와 위상마스크를 이용해 3dB 파장 선폭이 0.7 nm인 단주기 광섬유 격자(Fiber Bragg Grating)가 제작되었고, 이 격자의 파장에 따른 삽입 손실이 단일파장 광원과 cutback방식을 이용해 측정되었다. 이 격자의 온도 의존성을 확인하기 위해 -10 $^{\circ}C$ ~ 70 $^{\circ}C$ 범위에서 중심 파장의 변화를 측정하였는데 0.01 nm/$^{\circ}C$을 얻었으며 이 값은 온도 변화 방향과 무관하였다. 진폭마스크를 이용해 3 dB 선폭이 14.22 nm인 장주기 격자도 제작되었으며 이 경우는 같은 온도 범위에서 0.044 nm/$^{\circ}C$로 단주기 격자에 비해 온도 의존성이 4배 이상 컸다. 장주기 격자는 광섬유 코팅의 존재 여부도 온도 변화에 큰 영향을 미쳤다.