• 제목/요약/키워드: F.D.M.

검색결과 2,014건 처리시간 0.03초

표준강수지수와 지하수위의 상관성 평가 및 가뭄관측정 설치 방안 고찰 (Relationship Between Standardized Precipitation Index and Groundwater Levels: A Proposal for Establishment of Drought Index Wells)

  • 김규범;윤한흠;김대호
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제11권3호
    • /
    • pp.31-42
    • /
    • 2006
  • 가뭄의 정도를 정량화하고 예측하기 위하여 다양한 가뭄지수중 가장 일반적으로 사용되는 것들로는 PDSI(Palmer Drought Severity Index), SWSI(Surface Water Supply Index) 및 SPI(Standardized Precipitation Index) 등이 있다. 본 연구에서는 가뭄을 평가하는 방법 중 표준강수지수 (SPI) 를 활용한 가뭄도 산정 결과와 지하수위 관측자료간의 상관성을 평가함으로써 향후 지하수위 자료를 활용한 가뭄 평가의 가능성을 제시하고자 하였다. 본 연구 결과, 충 주가금, 양평개군 및 영주문정 관측소 지역에서 가뭄 평가 인자인 표준강수지수와 지하수위는 높은 상관성을 갖고 있는 것으로 분석되었으며, 지하수위는 표준강수지수 보다 기상 조건에 민감하지 않고 지속성과 영속성을 갖는 것으로 분석되어 가뭄 평가 인자로서 활용성이 있는 것으로 나타났다. 이들 지역의 지속기간 1개월 표준강수지수 및 충적층 지하수 관측정의 수위 관측자료 간의 교차상관계수는 충주가금 0.843, 양평개군 0.825 및 영주문정 0.737 등으 로 높게 나타났다. 지속시간 1개월의 경우에는 지하수위 변화와 표준강수지수가 1주일의 범위내에서 동시기적인 특성을 보이는 반면, 지속시간 3개월의 경우에도 지하수위 변화가 표준강수지수 보다 1주일 정도 선행하기 때문에 가뭄 예측시 충분히 활용할 수 있을 것으로 평가되었다. 따라서 가뭄을 보다 과학적으로 평가 예측하기 위해서는 기존 국가지하수관측정중에서 가뭄 관측정으로 사용될 수 있는 지점을 선정함과 아울러, 주변의 인위적인 영향이 최소화될 수 있는 지점에 신규 가뭄 관측정 (DIW, Drought-Index Well)을 설치 운영하는 것이 필요하다. 및 $Ca^{2+}$의 함량온 양의 상관도를 보여준다. WATEQ4F를 이용하여 포화지수를 계산해 볼 때, 광산부근의 지표수에서 사장석. 방해석. 돌로마이트 및 점토광물들은 대부분 용해성 조건을 가지나, 하류로 가면서 비광산 지역의 지표수가 유입됨에 따라 점진적으로 평형상태로 변한다. 그러나 비광산 지역의 지표수에서는 거의 모든 광물종이 포화상태 또는 침전조건을 나타낸다. 지구화학적 모델링을 통하여 규명된 잠제적 독성원소들은 광산수계에서 황산염(MS $O_4$$^{2-}$ ) 또는 단독 양이온( $M^{2+}$)으로 존재하나, 비광산 수계에서는 탄산염(C $O_3$$^{-}$) 또는 수산화물(O $H^{-}$) 형태의 복합 음이온으로 존재하는 것으로 밝혀졌다. 한편 조선누층군의 석회암질암이 모암을 이루는 상곡 및 금실광산 부근의 물이 옥천누층군에 속하는 변성퇴적암과 쥬라기의 화강암류가 분포하는 장풍 및 삼덕광산 수계의 물보다 pH가 높고 $Ca^{2+}$, $Mg^{2+}$ 및 HC $O_3$$^{-}$의 함량이 많으며 $\delta$D와 $\delta$$^{18}$ O의 조성 또한 무거운 특징이 있다. 그러나 이들은 광산폐수에의 오염에 의하여 거의 동일한 수리지구화학적 진화경향을 보인다.t 등을 제정하였다. 미국 서부에서 중국인의 수산업은 미국인의 법적 제재, 중국인의 다른 직업으로의 이직 등으로 1940년대를 끝으로 막을 내렸다.ved. Growth

Integrated Rotary Genetic Analysis Microsystem for Influenza A Virus Detection

  • Jung, Jae Hwan;Park, Byung Hyun;Choi, Seok Jin;Seo, Tae Seok
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.88-89
    • /
    • 2013
  • A variety of influenza A viruses from animal hosts are continuously prevalent throughout the world which cause human epidemics resulting millions of human infections and enormous industrial and economic damages. Thus, early diagnosis of such pathogen is of paramount importance for biomedical examination and public healthcare screening. To approach this issue, here we propose a fully integrated Rotary genetic analysis system, called Rotary Genetic Analyzer, for on-site detection of influenza A viruses with high speed. The Rotary Genetic Analyzer is made up of four parts including a disposable microchip, a servo motor for precise and high rate spinning of the chip, thermal blocks for temperature control, and a miniaturized optical fluorescence detector as shown Fig. 1. A thermal block made from duralumin is integrated with a film heater at the bottom and a resistance temperature detector (RTD) in the middle. For the efficient performance of RT-PCR, three thermal blocks are placed on the Rotary stage and the temperature of each block is corresponded to the thermal cycling, namely $95^{\circ}C$ (denature), $58^{\circ}C$ (annealing), and $72^{\circ}C$ (extension). Rotary RT-PCR was performed to amplify the target gene which was monitored by an optical fluorescent detector above the extension block. A disposable microdevice (10 cm diameter) consists of a solid-phase extraction based sample pretreatment unit, bead chamber, and 4 ${\mu}L$ of the PCR chamber as shown Fig. 2. The microchip is fabricated using a patterned polycarbonate (PC) sheet with 1 mm thickness and a PC film with 130 ${\mu}m$ thickness, which layers are thermally bonded at $138^{\circ}C$ using acetone vapour. Silicatreated microglass beads with 150~212 ${\mu}L$ diameter are introduced into the sample pretreatment chambers and held in place by weir structure for construction of solid-phase extraction system. Fig. 3 shows strobed images of sequential loading of three samples. Three samples were loaded into the reservoir simultaneously (Fig. 3A), then the influenza A H3N2 viral RNA sample was loaded at 5000 RPM for 10 sec (Fig. 3B). Washing buffer was followed at 5000 RPM for 5 min (Fig. 3C), and angular frequency was decreased to 100 RPM for siphon priming of PCR cocktail to the channel as shown in Figure 3D. Finally the PCR cocktail was loaded to the bead chamber at 2000 RPM for 10 sec, and then RPM was increased up to 5000 RPM for 1 min to obtain the as much as PCR cocktail containing the RNA template (Fig. 3E). In this system, the wastes from RNA samples and washing buffer were transported to the waste chamber, which is fully filled to the chamber with precise optimization. Then, the PCR cocktail was able to transport to the PCR chamber. Fig. 3F shows the final image of the sample pretreatment. PCR cocktail containing RNA template is successfully isolated from waste. To detect the influenza A H3N2 virus, the purified RNA with PCR cocktail in the PCR chamber was amplified by using performed the RNA capture on the proposed microdevice. The fluorescence images were described in Figure 4A at the 0, 40 cycles. The fluorescence signal (40 cycle) was drastically increased confirming the influenza A H3N2 virus. The real-time profiles were successfully obtained using the optical fluorescence detector as shown in Figure 4B. The Rotary PCR and off-chip PCR were compared with same amount of influenza A H3N2 virus. The Ct value of Rotary PCR was smaller than the off-chip PCR without contamination. The whole process of the sample pretreatment and RT-PCR could be accomplished in 30 min on the fully integrated Rotary Genetic Analyzer system. We have demonstrated a fully integrated and portable Rotary Genetic Analyzer for detection of the gene expression of influenza A virus, which has 'Sample-in-answer-out' capability including sample pretreatment, rotary amplification, and optical detection. Target gene amplification was real-time monitored using the integrated Rotary Genetic Analyzer system.

  • PDF

한우 인공수정시 rbST 투여가 수태 및 분만율에 미치는 영향 (Effect of rbST Administrations at Artificial Insemination on Conception and Parturition Rates in Hanwoo)

  • 한만희;최선호;최연호;김현종;조상래;최창용;류일선;손동수;연성흠;우제석;권응기;윤기영;장병선
    • 한국수정란이식학회지
    • /
    • 제20권2호
    • /
    • pp.177-184
    • /
    • 2005
  • 본 연구는 정상 및 저수태 한우에 rbST를 투여하였을 때 수태 및 분만율에 미치는 영향을 조사하기 위하여 수행하였다. 시험축은 성빈 한우 383두와 임상적으로는 정상이나 3회 이상 수정시켜도 수태가 되지 않는 저수태 한우 79두, 총 462두를 시험에 공시하였다. 실험을 수행하기 위한 시험구 배치는 5개의 처리구, 즉 T1(무처리, 2ml의 생리 식염수), T2(rbST 250mg 수정시 1회 미근부에 투여), T3(rbST 250mg: 수정시 및 수정후 $10\~14$일째 2회 투여), T4(rbST 500 mg: 수정시 1회 투여) 및 T5(rbST 500mg: 수정시 및 수정후 $10\~14$일째 2회 투여)로 나누어 시험을 실시하였다. 그리고 호르몬과 병행 처리구는 Day 0일에 GnRH 100 ug/cow를 견갑부에 피하주사하고 Day 7일째 $PGF_2{\alpha}\;25mg/cow$를 주사하여 황체를 퇴행시키고, Day 9일째 GnRH 100ug/cow를 주사하여 배란 동기화를 유도하여 시험에 공시하였다. 1. 정상 한우에 인공수정시 rbST를 T1, T2, T3, T4 및 T5로 처리하였을 때, 1회 수정 수태율은 대조구$(52.4\pm9.72\%)$에 비하여 $T2(67.5\pm18.48\%)$에서 높은 것으로 나타났고, 저수태우에서는 대조구$(39.3\pm12.89\%)$보다 $T4(63.3\pm5.77\%)$에서 유의적으로 높은 수태율을 나타냈다.(p<0.05). 또한, 정상 한우의 분만율에 있어서는 처리구간 유의적인 차이가 인정되지 않았지만, 저수태우에서는 $T4(46.7\pm11.55\%)$에서 유의적으로 높은 성적을 나타냈다(p<0.05). 2. Ovsynch 방법으로 발정을 유기하여 인공수정시 rbST를 T1, T2, T3, T4 및 T5로 처리하였을 때, 1회 수정 수태율은 대조구에 비하여 T2에서 $12.5\%$가 높은 것으로 나타났고, 저수태우에서는 $T4(80.0\%)$에서 유의적으로 높은 수태 율을 나타냈다(p<0.05). 3. 정상 한우에 인공수정시 rbST를 T1, T2, T3, T4 및 T5로 각기 처리하였을 때, 임신 기간은 평균 $282.7\~284.8$일이었고, 또한 생시체중의 비교는 평균 $25.1\~25.9kg$으로서 처리 구간 유사한 결과를 보였다. 그러나, 송아지의 암수 성비는 T4 처리구(18두 vs. 9두)를 제외한 모든 처리구에서 유사한 경향을 보였다. 그리고, 저수태 한우의 평균 임신 기간은 $280.4\~289.3$일로서 정상우와 비교했을 때 비슷한 결과를 보였고, 또한 생시 체중의 조사 결과에서도 평균 체중이 $23.0\~26.6kg$으로서 각 처리구간에도 유의성은 없었다. 송아지의 암$\cdot$수의 성비는 T4 처리구(2두 vs. 8두)를 제외한 모든 처리구에서 유사하게 나타났다. 결론적으로, 본 연구에서는 정상 및 저수태 성빈 한우에 rbST를 투여한 후 수태율과 분만율을 조사한 결과 인공수정시 정상우에서는 rbST를 250mg 1회 투여, 그리고 저수태 한우에 있어서는 rbST를 500mg을 인공수정시 1회 투여하였을 때가 다른 처리구에서 보다 우수한 결과를 나타내었다. 따라서 인공수정시 일정량의 rbST투여는 한우의 수태 및 분만율을 향상시키는 것으로 사료된다.

인터넷쇼핑몰의 VMD 구성요인에 대한 탐색적 연구 (An Exploratory Study on the Components of Visual Merchandising of Internet Shopping Mall)

  • 김광석;신종국;구동모
    • 마케팅과학연구
    • /
    • 제18권2호
    • /
    • pp.19-45
    • /
    • 2008
  • 본 연구는 인터넷쇼핑몰 비주얼 머천다이징의 주요차원을 고객이 쇼핑몰에 진입한 후 정보탐색과 대안평가를 거치는 등의 쇼핑과정을 토대로 AIDA모형 관점에서 점포, 제품, 촉진에 초점을 맞추었다. VMD의 주요차원(primary dimensions)으로는 점포디자인, 머천다이징, 그리고 머천다이징단서로 구분하였다. 선행연구 결과를 토대로 점포다자인의 하위차원으로는 차별성, 간결성, 위치확인성을, 머천다이즈의 하위차원으로는 제품구색, 명성, 정보성을, 그리고 머천다이징단서의 하위차원으로는 제품추천 및 링크를 설정하여 VMD태도와의 관계를 탐색적으로 조사하였다. 연구결과 이들 세 차원은 종속변수에 유의한 정의 영향을 미치는 것으로 나타났다.

  • PDF