• Food Science of Animal Resources
• /
• v.31 no.1
• /
• pp.47-53
• /
• 2011

Salmonella enterica serovar Typhimurium (ST) is one of the most common serovars isolated from humans and animals. It has been suggested that ST infections in Koreans are largely due to the consumption of contaminated pork and beef. To investigate the genotypes, phage types, and antimicrobial resistance patterns for ST isolates of different origins, a total of 70 ST strains, including 19 isolates from humans, 44 isolates from pigs, and 6 isolates from cattle, were analyzed using pulsedfield gel electrophoresis (PFGE), phage typing, and antimicrobial susceptibility tests. Forty-three distinct PFGE patterns were generated from 70 ST isolates, which were grouped into 14 PFGE groups (from A to N) at the level of 75% similarity. The most prevalent group was the A (A1-A17 subtypes) group, encompassing 54.5% (38/70) of ST isolates. ST isolates from pigs and cattle mostly belong to groups A and L, whereas ST isolates from humans mostly belong to groups F and C. Antimicrobial susceptibility tests using 11 antimicrobial agents showed that resistance to tetracycline (TE) (81.4%) was highly prevalent, followed by streptomycin (S) (64.3%) and nalidixic acid (NA) (31.4%) resistance. A total of seventeen antimicrobial resistance patterns were observed. Only 8.6% of isolates, including a reference strain, were susceptible to all antimicrobial agents tested. The most prevalent resistance pattern was TE-S (37.1%), which was seen in 66.6% of bovine, 40.8% of swine and 21.1% of human isolates. Three ST isolates from humans (15.9%) showed resistance to 7-8 antimicrobials. The most predominant phage type (PT) was U302 (64.3%), followed by DT170 (10.0%). PFGE types did not coincide with antimicrobial resistance patterns and phage types; therefore, the combination of those types allowed for further differentiation between tested ST isolates.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.4
• /
• pp.263-269
• /
• 2016

BACKGROUND: The personal protective equipments (PPEs) is the most important factor for reducing the pesticide exposure during the preparation and spraying of pesticides. This study was to investigate the retention, repellence and penetration of protective clothing of PPEs according to the ISO 22608 'Liquid penetration resistance-pipette test. Protective clothing for agriculture worker is very important for their health. However, test method for measurement of protective clothing is not presented in Korea. METHODS AND RESULTS: In order to measure the retention, repellence and penetration of protective clothing, a apparatus for pipette method in accordance with the ISO Guideline was prepared. The test was conducted at $25{\pm}5^{\circ}C$, $60{\pm}10%$ of relative humidity and pipette applied to a apparatus was validated to take exact amount(0.2 mL). The retention, repellence and penetration of five types of protective clothing and one type of shirt were analyzed by GC/MS. Pendimethalin(5% a.i, emulsion) was used as a test pesticide to measure above factors. The retention were less than 11.0% with the exclusion of two types(F4 and shirt) and the repellency was more than 67.0% with the exclusion of shirt material. The penetration was less than 5.4%, however, that of shirt was 66.7%. CONCLUSION: This results indicated that all protective clothing were suitable to use as PPEs according to the criteria specified by ISO Guide 22608. However, shirt was not suitable due to high penetration. This test method established for measurement the retention, repellence and penetration of protective clothing will help to establish the test notice of pipette method.

• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.503-508
• /
• 2004

This study was conducted to estimate the growth curve parameters of crossbreds between Korean native boars and Landrace sows and their relationships with meat qualities. The data used were weight-age data and carcass data from 131 males and 122 females raised at N.L.R.I in Korea. Growth curve parameters were estimated from nonlinear regression using Gompertz model individually. Average mature weight(A), average maturing rate(k), and average inflection point(u) showing maximum growth rate estimated were 179.54${\pm}$6.06kg, 0.3154${\pm}$0.0059, and 5.50${\pm}$0.11 months in females, and 179.84${\pm}$6.33kg, 0.3049${\pm}$0.0061, and 5.24${\pm}$0.13 months in males, respectively. For the growth curve parameters and derived statistics, the phenotypic correlations of maturing rate with gain rate at inflection, mature weight, and inflection point were - .30, - .77, and - .93 in male, and - .31, - .78 and - .94 in female, respectively. Matrure weight was positively correlated to the inflection point as + .89 in both male and female, indicating that late maturing pigs with lower k had longer maturing period with increasing gain rate and reached point of inflection later than early maturing pigs with higher k, and grew to larger mature weight. Backfat thickness and erode fat contents were correlated with mature weight positively in male and negatively in female, and correlated with gain rate at inflection point positively in both male and female, of which coefficients were as high as .42 and .50 in male, respectively.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.5-6
• /
• 2002

The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

• Molecules and Cells
• /
• v.38 no.11
• /
• pp.966-974
• /
• 2015

Despite the presence of toll like receptor (TLR) expression in conventional $TCR{\alpha}{\beta}$ T cells, the direct role of TLR signaling via myeloid differentiation factor 88 (MyD88) within T lymphocytes on graft-versus-host disease (GVHD) and graft-versus-leukemia (GVL) effect after allogeneic stem cell transplantation (allo-SCT) remains unknown. In the allo-SCT model of C57BL/6 ($H-2^b$) ${\rightarrow}$ B6D2F1 ($H-2^{b/d}$), recipients received transplants of wild type (WT) T-cell-depleted (TCD) bone marrow (BM) and splenic T cells from either WT or MyD88 deficient (MyD88KO) donors. Host-type ($H-2^d$) P815 mastocytoma or L1210 leukemia cells were injected either subcutaneously or intravenously to generate a GVHD/GVL model. Allogeneic recipients of MyD88KO T cells demonstrated a greater tumor growth without attenuation of GVHD severity. Moreover, GVHD-induced GVL effect, caused by increasing the conditioning intensity was also not observed in the recipients of MyD88KO T cells. In vitro, the absence of MyD88 in T cells resulted in defective cytolytic activity to tumor targets with reduced ability to produce IFN-${\gamma}$ or granzyme B, which are known to critical for the GVL effect. However, donor T cell expansion with effector and memory T-cell differentiation were more enhanced in GVHD hosts of MyD88KO T cells. Recipients of MyD88KO T cells experienced greater expansion of Foxp3- and IL4-expressing T cells with reduced INF-${\gamma}$ producing T cells in the spleen and tumor-draining lymph nodes early after transplantation. Taken together, these results highlight a differential role for MyD88 deficiency on donor T-cells, with decreased GVL effect without attenuation of the GVHD severity after experimental allo-SCT.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.2
• /
• pp.217-222
• /
• 2003

We studied effects of hot water extract of Lentinus edodes (Berk.)sing. and Pleurotus eryngii (De Candolle ex Fries) Quel mushroom on proliferation and apoptosis of the human colon adenocarcinoma, HT-29 and Caco-2.. Cells were maintained with Dulbecco's modified Eagle medium/Ham's F-12 nutrient mixture supplemented with 10% fetal bovine serum at 37$^{\circ}C$ in a humidified $CO_2$. For cell proliferation experiments, cells were seeded in 35 mm dishes, treated with the various concentrations of the extract for the different time course. Apoptosis was measured by caspase-3 activity The more contents of the extract added in HT-29 and Caco-2 were, the more cell proliferation was suppressed. When we incubated HT-29 cells for 24, B\ulcorner72, and 96 hours after treatments, cell proliferation was markedly suppressed after 96 hours. Also, caspase-3 activity in HT-29 was increased by the treatment of Lentinus edodes and Pleurotus eryngii extracts. However, the treatment of the extract to SNU484, Korean stomach adenocarcinoma, did not show any influence on cell proliferation and caspase-3 activity Therefore, Lentinus edodes and Pleurotus eryngii are strongly recommended for the prevention and treatment of colon cancer.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.30-36
• /
• 2008

In this study, raw ginseng produced by different method; was puffed and the absorption characteristics of the puffed ginseng powders were investigated Raw ginseng preparations, including white ginseng lateral root (WGL), red ginseng lateral root (RGL) and red ginseng main root (RGM) with 15 % moisture were puffed at a pressure of $7kg_f/cm^2$. The equilibrium moisture contents of puffed powders were affected by temperature and water activity. The monolayer moisture content determined by 1he BET equation was 0.034-0.045g $H_2O/g$ solid. The $R^2$ parameter of 1he BET equation was higher than that of the GAB equation. The absorption enthalpies, calculated using various water activities, showed a decreasing trend with increasing water activity. Amongst models applied for predicting equilibrium moisture content, 1he Kuhn model was 1he best fit for puffed ginseng powders, giving 1he lowest prediction deviation of 2.83-8.65% The prediction model equation for water activity included 1he variable of time, water activity (RH/l00) and temperature, whereas an equation featuring the parameters of time and water activity was the best model equation identified.

• Korean Journal of Materials Research
• /
• v.26 no.3
• /
• pp.117-122
• /
• 2016

White organic light-emitting diodes with a structure of indium-tin-oxide [ITO]/N,N-diphenyl-N,N-bis-[4-(phenylm-tolvlamino)-phenyl]-biphenyl-4,4-diamine [DNTPD]/[2,3-f:2, 2-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile [HATCN]/1,1-bis(di-4-poly-aminophenyl) cyclo -hexane [TAPC]/emission layers doped with three color dopants/4,7-diphenyl-1,10-phenanthroline [Bphen]/$Cs_2CO_3$/Al were fabricated and evaluated. In the emission layer [EML], N,N-dicarbazolyl-3,5-benzene [mCP] was used as a single host and bis(2-phenyl quinolinato)-acetylacetonate iridium(III) [Ir(pq)2acac]/fac-tris(2-phenylpyridinato) iridium(III) $[Ir(ppy)_3]$/iridium(III) bis[(4,6-di-fluoropheny)-pyridinato-N,C2] picolinate [FIrpic] were used as red/green/blue dopants, respectively. The fabricated devices were divided into five types (D1, D2, D3, D4, D5) according to the structure of the emission layer. The electroluminescence spectra showed three peak emissions at the wavelengths of blue (472~473 nm), green (495~500 nm), and red (589~595 nm). Among the fabricated devices, the device of D1 doped in a mixed fashion with a single emission layer showed the highest values of luminance and quantum efficiency at the given voltage. However, the emission color of D1 was not pure white but orange, with Commission Internationale de L'Eclairage [CIE] coordinates of (x = 0.41~0.45, y = 0.41) depending on the applied voltages. On the other hand, device D5, with a double emission layer of $mCP:[Ir(pq)_2acac(3%)+Ir(ppy)_3(0.5%)]$/mCP:[FIrpic(10%)], showed a nearly pure white color with CIE coordinates of (x = 0.34~0.35, y = 0.35~0.37) under applied voltage in the range of 6~10 V. The luminance and quantum efficiency of D5 were $17,160cd/m^2$ and 3.8% at 10 V, respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.6
• /
• pp.541-549
• /
• 2008

The fatigue analysis is performed to avoid structural failure in aerospace structures under repeated loads. In this paper, the fatigue life is estimated for the design of tilt rotor UAV. First of all, the fatigue load spectrum for tilt rotor UAV is generated. Fatigue analysis is done for the flaperon joint which may have FCL(fracture critical location). Tilt rotor UAV operates at two modes: helicopter mode such as taking off and landing; fixed wing mode like cruising. To make overall fatigue load spectrum, FELIX is used for helicopter mode and TWIST is used for fixed wing mode. The other hand, the Kriging meta model is used to get S-N regression curve for whole range of material life when S-N test data are analyzed. And then, the second order of S-N curve is accomplished by the least square method. In addition, the coefficient of determination method is used to ensure how accuracy it has. Finally, the fatigue life of flaperon joint is compared with that obtained by MSC. Fatigue.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.313-326
• /
• 2007

The purpose of this study was to prove that an intermediate resin layer (IRL) oan increase the bond strength to dentin by reducing the permeability of single-step adhesives. Flat dentin surfaces were created on buccal and lingual side of freshly extracted third molar using a low-speed diamond saw under copious water flow. Approximately 2.0 mm thick axially sectioned dentin slice was abraded with wet #600 SiC paper. Three single-step self-etch adhesives; Adper Prompt L-Pop (3M ESPE, St Paul, MN, USA), One-Up Bond F (Tokuyama Corp, Tokyo, Japan) and Xeno III (Dentsply, Konstanz, Germany) were used in this study. Each adhesive groups were again subdivided into ten groups by; whether IRL was used or not; whether adhesives were cured with light before application or IRL or not; the mode of composite application. The results of this study were as follows; 1. Bond strength of single-step adhesives increased by an additional coating of intermediate resin layer, and this increasement was statistically signigicant when self-cured composite was used (p < 0.001). 2. When using IRL, there were no difference on bond strengths regardless the curing procedure of single-step adhesives. 3. There were no significant difference on bond strengths between usage of AB2 or SM as an IRL. 4. The thickness of Hybrid layer was correlated with the acidity of adhesive used, and the nanoleakage represented by silver deposits and grains was examined within hybrid and adhesive layer in most of single-step adhesives. 5. Neither thickness of hybrid layer nor nanoleakage were related to bond strength.