• 대한상한금궤의학회지
• /
• v.9 no.1
• /
• pp.59-73
• /
• 2017

Objectives : The purpose of this case report is to report the effect of Daesiho-tang on adult acne by Shanghanlun provisions with extrusion therapy. Methods : According to diagnostic system based on Shanghanlun provisions, the patient was diagnosed with Taeyang-byung Gyeolhyung and treated by Daesiho-tang with extrusion therapy. The result of administrations were evaluated by Korean Acne Grading System(KAGS), Korean Skindex-29, and change of clinical symptoms. Results : After administration of Daesiho-tang for 150 days with weelky extrusion therapy, KAGS improved from grade 4 to grade 1, Skindex-29 improved from 67.93 to 15.51, and patient was very satisfied with the treatment. No serius treatment-related adverse events were reported. Limitations : This case is only one case that the level of evidence is weak. Two interventions were used together and the duration of photo was uneven. Conclusions : The patient almost recovered from acne treated by Daesiho-tang according to diagnostic system based on Shanghanlun provisions with extrusion therapy. This is the first case report that suggests '熱結在裏' on the number 136 provision of Shanghanlun means fever that is always present in chronic skin lesions.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.718-719
• /
• 2006

Two different commercial aluminium powder grades have been densified by direct hot extrusion. The extrusion temperature was $425^{\circ}C$, with an extrusion ratio of 1:16. Prior to extrusion, some green compacts were pre-sintered ($500^{\circ}C$). The evolution of the extrusion load during the process and the hardness of the final products have been investigated. Additionally, microstructural characterization by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Electron Backscattered Diffraction (EBSD) was carried out. The obtained results evidence grain refinement. Additionally, inter-metallic precipitation, dynamic recovery and geometric dynamic recrystallization take place depending on some process variables, powder composition, heat treatment, strain $\ldots$

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.3
• /
• pp.264-269
• /
• 2015

Although sodium hypochlorite is the most frequently used canal irrigant during endodontic treatment, its complications are not as well recognized as its effectiveness. This report demonstrates that sodium hypochlorite extrusion during endodontic treatment can cause severe complications. A 5-year-old boy experienced immediate pain and swelling, ecchymosis in surrounding tissues, and profuse bleeding from the root canal during endodontic treatment, because of accidental extrusion of sodium hypochlorite. The patient was hospitalized, and analgesics and antibiotics were prescribed. Accidental extrusion of the irrigating solution occurs more frequently in teeth with immature apices, root resorption, and apical perforations; therefore, caution is needed. When such complications occur, proper management and medications are needed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.281-284
• /
• 2003

The microstructural changes of Al-Zn-Mg-Cu alloy containing Sc during hot extrusion and post heat treatment is investigated. Two kinds of Al-Sc alloys with different alloying elements (B1, B2) are hot extruded to make I-shape bars at 380$^{\circ}C$, then the bars are solution treated at 480$^{\circ}C$ for 2hrs followed by artificial aging at 120$^{\circ}C$ for 24hrs. The interior microstructure of as extruded bar consists of elongated grains, however, fine equiaxed grains are mainly observed around surface. The microstructural gradient suggests that different restoration process can proceed during the hot extrusion. For B1 and B2, different grain growth behaviors are found around the surface during the post heat treatment. Rapid grain growth behavior around the surface is discussed related with the crystallographic orientation of the grain.

• Journal of Environmental Science International
• /
• v.16 no.10
• /
• pp.1169-1177
• /
• 2007

The main objective of this research was to evaluate the effects of process variables which were forming ability, flow displacement, effective stress, effective strain, fluid vector and products defects on manufactured artificial lightweight aggregate made of both incinerated sewage sludge ash and clay by means of the numerical analysis of a rigid-plastic finite element method. CATIA (3D CAD program) was used for an extrusion metal mold design that was widely used in designing aircraft, automobile and metallic molds. A metal forming analysis program (ATES Co.) had a function of a rigid-plastic finite element method was used to analyze the program. The result of extrusion forming analysis indicated clearly that a shape retention of the manufactured artificial light-weight aggregate could be maintained by increasing the extrusion ratio (increasing compressive strength inside of extrusion die) and decreasing the die angle. The stress concentration of metal mold was increased by increasing an extrusion ratio, and it was higher in a junction of punch and materials, friction parts between a bottom of the punch and inside of a container, a place of die angle and a place of die of metal mold. Therefore, a heat treatment as well as a rounding treatment for stress distribution in the higher stress concentration regions were necessary to extend a lifetime of the metallic mold. A deformity of the products could have made from several factors which were a surface crack, a lack of the shape retention and a crack of inside of the products. Specially, the surface crack in the products was the most notably affected by the extrusion ratio.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.2
• /
• pp.228-233
• /
• 1997

The effects of spray drying and extrusion drying on functional properties of agar were investigated to increase the availability of agar in food industry. In case of unmodified and spray-dried agar, gel strength and viscosity were 1,070g/$ extrm{cm}^2$ and 170.50pcs, 820g/$\textrm{cm}^2$ and 17.07cps, respectively, while 523.28g/$\textrm{cm}^2$ and 12.81 in extrusion-dried product. The lowest dissolving onset and conclusion temperature were revealed in extrusion sample, where it was attained in 80 and 11$0^{\circ}C$ of unmodified, 60 and 9$0^{\circ}C$ of spray-dried, and 35 and 8$0^{\circ}C$ of extrusion-dried agar, respectively. Melting and setting in unmodified sample were showed to 110.17 and 40.52, 90.05 and 39.54$^{\circ}C$ in spray dried, and 80.01 and 36.05$^{\circ}C$ in extrusion-dried agar, respectively.

• The Journal of the Korean dental association
• /
• v.57 no.11
• /
• pp.679-688
• /
• 2019

A 8-year-old patient presented with a crown-root fracture of the maxillary right central incisor with an oblique subgingival fracture line. A multidisciplinary treatment approach including endodontic treatment, surgical extraction and intraalveolar repositioning was used to gain sufficient crown length of the fractured maxillary incisor. The coronally repositioned maxillary right central incisor was stabilized by a resin wire splint. Apexification using MTA was performed. Resin core and direct resin restoration(Cl IV) on fractured teeth was built up. Clinical and radiographic follow-up of the maxillary right central incisor after 36 months showed no signs of root resorption or pathology and acceptable aesthetics and functions were maintained. Surgical extrusion can be considered as a good treatment modality for young patients.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.184-187
• /
• 2005

Forging process is one of the forming process and is used widely in automobile parts and manufacture industry. Especially the gears like spur gear, helical gear, bevel gear were produced by machine tool, but recently they have been manufactured by forging process. The goal of this study is to study forming process with data obtained by comparison between forward extrusion and upsetting simulation results and formability improvement by various heat treatment conditions. By analysis data of 3D FEM by upsetting and forward extrusion forming, the forming process of clutch gear develops using data based on 3D FEM analysis. Through tensile test using specimens by various heat treatment conditions, the optimal heat treatment condition is obtained by comparison the results of tensile test.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.132-135
• /
• 2007

In this study, hydroformability and mechanical properties of pre- and post- heat treated Al6061 tubes at different extrusion type were investigated. For the investigation, as-extruded, full annealed and T6-treated Al6061 tubes at different extrusion type were prepared. To evaluate the hydroformability, uni-axial tensile test and free bulge test were performed at room temperature and $250^{\circ}C$. Also mechanical properties of hydroformed part at various pre- and post-heat treatments were estimated by tensile test. And the tensile test specimens were obtained from hexagonal prototype hydroformed tube at $250^{\circ}C$. As for the heat treatment, hydroformability of full annealed tube is 25% higher than that of extruded tube. The tensile strength and elongation were more than 330MPa and 12%, respectively, when hydroformed part was post-T6 treated after hydroforming of pre- full annealed tube. However, hydroformed part using T6 pre treated tube represents high strength and low elongation, 8%. Therefore, the T6 treatment after hydroforming for as-extruded tube is cost-effective. Hydroformability of Al6061 tube showed similar value for both extrusion types. But flow stress of seam tube showed $20{\sim}50MPa$ lower value.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.818-823
• /
• 2018

In this study, the effect of pre-aging treatment for inhibition of natural aging of Al-4.8Zn-1.3Mg alloy by extrusion process was investigated. Firstly, the as-cast microstructure of Al-4.8Zn-1.3Mg alloy billet and its evolution during homogenization($460^{\circ}C$, $4h+510^{\circ}C$, 5h) were investigated by means of optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), hardness analysis. The as-cast microstructures of Al-4.8Zn-1.3Mg alloy reveal $Mg_2Zn$, $Al_5Cu$, $Al_{13}Cu$ formed between dendrities. After homogenization, MgZn, $Al_4Cu$, $Al_{13}Cu$ phases precipitated into the matrix. In addition, standard deviation of homogenized billet was improved than as-cast billet from 2.62 to 0.99. According to pre-aging($100^{\circ}C$, 1h) Al-4.8Zn-1.3Mg alloy by extrusion process, yield strength and tensile strength deviation improved more than condition by natural aging.