• Journal of Animal Science and Technology
• /
• 제57권7호
• /
• pp.26.1-26.5
• /
• 2015

Background: Rice bran is a by-product of the rice-milling process, which remains largely underutilized; however, efficient processing treatments may improve its feeding value for chickens. This is of great economic and environmental importance, as this can lower the production costs, and offer an opportunity for valorization of a low-quality agricultural by-product, to a high-value feed source. Methods: This experiment was conducted to study the effect of extruded rice bran on performance and phosphorous (P) bioavailability in broiler chickens. In a completely randomized design, 200 seven-day-old broilers (Cobb 500) were allotted to five treatments with five replicates per treatment and 8 chicks per replicate, and fed with their respective diet during the starter (8 to 21 days) and grower (22 to 42 days) periods. Diets were a basal corn-soybean based diet (T1), or diets containing 20 % rice bran (T2), 30 % rice bran (T3), 20 % extruded rice bran (T4), or 30 % extruded rice bran (T5). Results: Birds feeding on T4 and T5 diets had a higher body weight gain and lower feed-to-gain ratio compared to those feeding on T2 and T3 diets (p < 0.05). Birds receiving diets containing extruded rice bran had higher total P availability and tibia ash content, as compared with those receiving diets containing un-extruded rice bran (p < 0.05). Relative weight of the pancreas was higher in birds receiving T2 and T3 diets. Conclusions: The results confirmed the beneficial effect of extrusion treatment of rice bran on performance and P availability in broilers. Up to 30 % extruded rice bran may be included in the broiler diet without apparent adverse effects on the performance.

• 대한방사선기술학회지:방사선기술과학
• /
• 제22권1호
• /
• pp.27-33
• /
• 1999

The classification of herniated intervertebral lumbar disc type is clinically important, as treatment method may be slightly different according to the type of herniated intervertebral disc. When 450 patients who suffered from herniated intervertebral lumbar disc were tested with Magnetic Resonance Imaging (MRI) to find out the type of herniated disc, the following findings were given : 1. The age of the patients investigated ranged from 15 to 83, and their mean age was 40. 2. The male patients were twice as many as the female patients, since the ratio of males to females was 300 : 150. 3. 118 patients suffered from a single herniated disc, and 332 patients were attacked with multi-herniated disc. 4. The types of single herniated disc were a protrusion for 50 patients (40%) and an extrusion for 40 patients (34%). The part of being herniated was an intervertebral disc between $L_4-L_5$ for 95 patients(80%) and the same disc between $L_5-S_1$ for 22 patients(19%). 5. The types of multi : -herniated disc were an protrusion for 67 patients(20%) and an extrusion for 70 patients(21%). Besides, 90 patients (28%) were the case that protrusion and extrusion coexisted simultaneously. The parts of being herniated were $L_3-L_4,\;L_4-L_5$ and $L_5-S_1$ for 53 patients(16%), $L_3-L_4$ and $L_4-L_5$ for 57 patients(17%), and $L_4-L_5$ and $L_5-S_1$ for 139 patients(42%).

• 한국식품영양과학회지
• /
• 제33권10호
• /
• pp.1742-1747
• /
• 2004

쥐치어의 이용을 다양화하기 위하여 분리대두단백과 쌀가루를 첨가하여 원료 혼합물의 수분함량을 20∼30%로 조절한 후 단축스크류 압출성형기를 이용하여 압출성형으로 조직화 단백질을 제조하기 위한 실험을 하였으며 쌀가루함량, 토출구온도 및 원료 혼합물의 수분함량이 압출성형물의 물리화학적 및 관능적특성에 미치는 영향을 반응표면분석을 이용하여 최적화하였다. 쌀가루함량이 증가하면 팽화율이 증가하므로 재흡수율은 높아지는 반면 밀도는 낮아지는 현상을 보였다. 재흡수율과 밀도는 서로 유의성 있게 반비례하는 상관관계 (p<0.01, R=-0.742)를 보였다. 육안적인 관능검사방법은 조직잔사지수와 유의성 있는 상관관계(p<0.01, R=0.489)를 보였으므로 비교적 조직화의 정도를 평가하는 방법으로 적절한 것으로 간주되었다. 그리고 관능검사와 재흡수율의 상관관계(p<0.01, R=0.507)와 밀도와의 상관관계(p<0.001, R=-0.596)가 각각 비교적 높게 나타났으며 압출공정에서 토출구의 온도가 13$0^{\circ}C$ 이상에서 최적의 조직화가 형성되었다.

• Elastomers and Composites
• /
• 제42권2호
• /
• pp.86-92
• /
• 2007

이축 연신에 의한 폴리테트라플루오르에틸렌(PTFE) 막을 제조하기 위한 공정 조건을 확립하기 위하여 상용화되는 PTFE 막 및 PTFE 미세 분말을 선택하였다. 막 제조공정에 사용 되기 위해 PTFE 미세 분말은 전처리 되었고, 첨가제와 혼합되었으며, 혼합물의 숙성, 페이스트 압출 공정, 칼렌더 가공 공정 등이 수행되었고 막의 두께 및 기공크기와 다공성을 측정하였다. 기계적 물성을 강화하기 위하여 시료의 후처리가 실시되었고, PTFE 막 제조공정을 위한 페이스트 압출 공정에서의 PTFE 분말과 첨가제의 혼합비, 숙성 시간, 숙성 온도, 압력 등에 관한 공정 조건이 확립되었고, 기공크기(pore size)와 다공성(porosity)을 조절할 수 있는 이축연신 공정에 대한 최적공정 조건도 확립하였다.

• Preventive Nutrition and Food Science
• /
• 제21권3호
• /
• pp.271-280
• /
• 2016

The effects of $CO_2$ injection and barrel temperatures on the physiochemical and antioxidant properties of extruded cereals (sorghum, barley, oats, and millet) were studied. Extrusion was carried out using a twin-screw extruder at different barrel temperatures (80, 110, and $140^{\circ}C$), $CO_2$ injection (0 and 500 mL/min), screw speed of 200 rpm, and moisture content of 25%. Extrusion significantly increased the total flavonoid content (TFC) of extruded oats, and ${\beta}$-glucan and protein digestibility (PD) of extruded barley and oats. In contrast, there were significant reductions in 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity, PD of extruded sorghum and millet, as well as resistant starch (RS) of extruded sorghum and barley, and total phenolic content (TPC) of all extrudates, except extruded millet. At a barrel temperature of $140^{\circ}C$, TPC in extruded barley was significantly increased, and there was also an increase in DPPH and PD in extruded millet with or without $CO_2$ injection. In contrast, at a barrel temperature of $140^{\circ}C$, the TPC of extruded sorghum decreased, TFC of extruded oats decreased, and at a barrel temperature of $110^{\circ}C$, PD of extruded sorghum without $CO_2$ decreased. Some physical properties [expansion ratio (ER), specific length, piece density, color, and water absorption index] of the extrudates were significantly affected by the increase in barrel temperature. The $CO_2$ injection significantly affected some physical properties (ER, specific length, piece density, water solubility index, and water absorption index), TPC, DPPH, ${\beta}$-glucan, and PD. In conclusion, extruded barley and millet had higher potential for making value added cereal-based foods than the other cereals.

• 소성∙가공
• /
• 제31권5호
• /
• pp.253-260
• /
• 2022

In this study, the microstructural characteristics of a high-speed-extruded Mg-5Bi-3Al (BA53) alloy and its tensile, compressive, and high-cycle fatigue properties are investigated. The BA53 alloy is successfully extruded at a die-exit speed of 16.6 m/min without any hot cracking using a large-scale extruder for mass production. The homogenized BA53 billet has a large grain size of ~900 ㎛ and it contains fine and coarse Mg₃Bi₂ particles. The extruded BA53 alloy has a fully recrystallized microstructure with an average grain size of 33.8 ㎛ owing to the occurrence of complete dynamic recrystallization during high-speed extrusion. In addition, the extruded BA53 alloy contains numerous fine lath-type Mg₃Bi₂ particles, which are formed through static precipitation during air cooling after exiting the extrusion die. The extruded BA53 alloy has a high tensile yield strength of 175.1 MPa and ultimate tensile strength of 244.4 MPa, which are mainly attributed to the relative fine grain size and numerous fine particles. The compressive yield strength (93.4 MPa) of the extruded BA53 alloy is lower than its tensile yield strength, resulting in a tension-compression yield asymmetry of 0.53. High-cycle fatigue test results reveal that the extruded BA53 alloy has a fatigue strength of 110 MPa and fatigue cracks initiate at the surface of fatigue test specimens, indicating that the Mg₃Bi₂ particles do not act as fatigue crack initiation sites. Furthermore, the extruded BA53 alloy exhibits a higher fatigue ratio of 0.45 than other commercial extruded Mg-Al-Zn-based alloys.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.364-367
• /
• 2007

Typical seamless tube production methods are an extrusion and a rotary tube piercing. The rotary piercing process is more competitive than the extrusion process form view point of productivity, quality, and flexibility. It consists of twin rolling mills, a pair of disc or flat guides, and a plug. Twin rolling mills are skewed with proper angles in two directions. A round billet is progressively fed forward and rotated due to the rotation of twin rolling mills. Internal crack initiation and growth at central area of the billet are gradually progress because of the repeating actions of tension and rotation. Design variables in the rotary piercing rolling process are the feed angle, the cross angle, the reduction ratio, and the position of plug. In this work, a rotary tube piercing machine was developed and parametric studies on design variables were carried out using finite element analysis. The Brozzo ductile fracture criterion was utilized to determine an internal crack initiation.

• Food Science and Biotechnology
• /
• 제16권3호
• /
• pp.381-385
• /
• 2007

The objective of this experiment was to study the influence of feed moisture content on the degree of enzymatic hydrolysis of com starch in a twin screw extruder and the saccharification yield of the dried extrudate. The feed moisture content was set at 25, 30, and 35% and ${\alpha}$-amylase solution was directly injected into the feed section at a barrel temperature of $95^{\circ}C$ and screw speed of 250 rpm. Amyloglucosidase was used for the saccharification of the dried extrudate at a concentration of 0.055%(w/w). Expansion ratio and swelling factor of extrudates decreased with increasing the feed moisture content. Addition of ${\alpha}$-amylase during extrusion process raised reducing sugar content of extrudates which also increased with the feed moisture content. The saccharification yield of dried extrudate was higher for the extrudate with lower feed moisture content.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권1호
• /
• pp.89-95
• /
• 1995

The efficient use as a protein source for poultry of full fat soybean (FFSB) treated under various processes, i. e. steaming under pressure 40 lbs/sq. inch for 5, 10 or 15 minutes or roasting in a baking oven at $180^{\circ}C$ for 20, 30 or 40 minutes or extruding was compared with that of soybean meal. Eight hundred straight run broiler chicks (AA 707) were randomly allotted into 8 treatments of 4 replicates, fed with, rations containing either kind of the above mentioned FFSB for 6 weeks (Wks 1-7). The protein content of the diets for chicks during 1-3, 3-6 and 6-7 weeks of age was 21, 19 and 17% respectively. The result revealed that steaming can destroy 76-92% of the trypsin inhibitor activity (TlA) in soybean, particularly that at 15 minutes, while roasting can get rid of only 13-28% TlA. Chicks fed roasted FFSB had an enlarged pancreas and showed inferior performances to the steaming and the extrusion products. Steaming should be at least 10-15 minutes in order to obtain the comparable performances to those of the extrusion or of the soybean meal. The extruded FFSB showed the best feed conversion ratio. This might be due to the very fine particle of the product.

• 한국분말재료학회지
• /
• 제16권3호
• /
• pp.209-216
• /
• 2009

A composite of rapidly solidified Al-6061 alloy powder with graphite particle reinforcements was prepared by ball milling and subsequent hot extrusion. The microstructure and mechanical properties of these composites were investigated as a function of milling time. With increasing milling time, the gas atomized initially and spherical powders became elongated with a maximum aspect ratio after milling for 30 h. Then, refinement and spheroidization were achieved by further milling to 70 h with a homogeneous and fine dispersion of graphite particles forming between the matrix alloy layers. The best compression and wear properties were obtained in the powder milled for 70 h, associated with the increased fine and homogeneous distribution of graphite particles in the aluminum alloy matrix.