• 한국식품영양학회지
• /
• 제12권5호
• /
• pp.523-528
• /
• 1999

The influence of ginseng on the paste or gelatinization properties by amylograph and mixing properties by farinograph of wheat flour and on quality properties color cooking quality textural and sensory properties and reducing microbial population of LL(Long Life) noodles was studied. The contents of ginseng used were from 5% to 10% based on flour weight. The viscosity property of wheat flour with ginseng was increased the initial pasting temperature but the amylograph peak viscosity were decreased in vice versa. The farinograph absorption stability and breakdown were increased by ginseng. The whiteness of Ll nodles manufactured with ginseng was lower than that of control The shear extrusion force and hardness of LL noodles manufactured with ginseng were shown much higher value than those of control. At cooking quality examination of LL noodles manufactured with ginseng weight of cooked LL noodles was decreased but volum was appeared in ice versa,. Extraction amounts of LL noodles manufactured with ginseng during cooking were much smaller than those of control Total count of microorganism of Ll noodles manufactured with ginseng were decreased during storage at 3$0^{\circ}C$ Sensory properties of cooked LL noodles which was manufactured with ginseng showed quite acceptable. Based on the cooking and sensory evaluation test addition of 7.0% ginseng to wheat flour may be suitable for processing LL noodles.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.382-386
• /
• 1998

titanate and a silicon carbide/zirconium diboride particulate composite have each been blended with thermoplastic of aqueous binders and extruded. The green extrudates have diameters ranging between 50 and 150 ㎛ and polyethylene-base 150 ${\mu}m$ diameter fibers can be drawn down at elevated temperature to approximately 40 ${\mu}m$ diameter. Hollow fibers with 150${\mu}m$ outer and 90 ${\mu}m$ inner diameter can also be fabricated. Green fibers have been processed into chopped fiber felts for use as gas distributors/current collectors in an experimental solid oxide fuel cell (SOFC) and the first attempts at producing simple textile structures have been successful. The fibers, tubes and felts have been successfully debound and sintered and characterization of the sintered PSZ fibers, for example, has revealed a density in excess of 99% and tensile failure stresses up to 1.0 GPa for 78 ${\mu}m$ diameter fibers.

• 한국식품영양학회지
• /
• 제12권3호
• /
• pp.252-257
• /
• 1999

In an attempt to evaluate the effects of calcium on paste or gelatinization properties by amylograph and mixing properties by farinograph of wheat flour and on viscosity property cooking quality textural and sensory properties of Ramyon were examined. The contents of calcium used were from 1.0% to 3.0% based on flour weight. The viscosity property of wheat flour with calcium was increased the initial past-ing temperature but the amylograph peak viscosity were decreased in vice versa. The farinograph absorp-tion stability and breakdown were increased by calcium. The shear extrusion force and hardness of Ram-yon manufactured with calcium were shown much higher value than those of control. At cooking quality examination of Ramyon manufactured with calcium weight of cooked Ramyon was increased by volume was decreased. Extraction amounts of Ramyon manufactured with calcium during cooking were much smaller than those of control. These changes will provided many advantages in the preparation of Ram-yon. The I2 reaction value of Ramyon manufactured with calcium and control were shown to almost same values. Sensory properties of cooked Ramyon which was manufactured with calcium showed quite acceptable. Based on the cooking and sensory evaluation test addition of 0.3% calcim to wheat flour may be suitable for processing Ramyon.

• 한국생산제조학회지
• /
• 제26권4호
• /
• pp.378-386
• /
• 2017

Friction stir welding was performed using six welding conditions to evaluate the mechanical properties and microstructure of the welded zone based on its temperature change in the extruded plate of magnesium alloy AZ61. The welded zone temperature was measured using a thermocouple, and the maximum temperature ranges for the advancing and retreating sides were approximately $210-315^{\circ}C$ and $254-339^{\circ}C$, respectively. Depending on the welding conditions, a temperature difference of more than $100^{\circ}C$ was observed. In addition, the maximum yield strength and maximum tensile strength of the welded component was 84.4% and 96.9%, respectively, of those of the base material. For the temperatures exceeding $300^{\circ}C$, oxidation defects occurred in the weld zone, which decreased the mechanical strength of the weld zone. The microstructure and texture confirmed that fracture occurred because of the grain size deviation of the welding tool and the severe anisotropy of the texture of the welded joints.

• 비파괴검사학회지
• /
• 제22권6호
• /
• pp.609-620
• /
• 2002

It is well known that during tensile testing, a part of the mechanical work done on the specimen is transformed into heat energy. However, the ultimate temperature rise and the rate of temperature rise is related to the nature of the material, conditions of the test and also to the deformation behaviour of the material during loading. The recent advances in infrared sensors and image/data processing techniques enable observation and quantitative analysis of the heat energy dissipated during such tensile tests. In this study, infrared imaging technique has been used to characterise the tensile deformation in AISI type 316 nuclear grade stainless steel. Apart from identifying the different stages during tensile deformation, the technique provided an accurate full-field temperature image by which the point and time of strain localization could be identified. The technique makes it possible to visualise the region of deformation and failure and also predict the exact region of fracture in advance. The effect of thermal gradients on plastic flow in the case of interrupted straining revealed that the interruption of strain and restraining at a lower strain rate not only delays the growth of the temperature gradient, but the temperature rise per unit strain decreases. The technique is a potential NDE tool that can be used for on-line detection of thermal gradients developed during extrusion and metal forming process which can be used for ensuring uniform distribution of plastic strain.

• Tribology and Lubricants
• /
• 제35권1호
• /
• pp.24-29
• /
• 2019

In this work we investigated the friction and wear characteristics of a magnesium alloy, which has been receiving much attention as a light metal in industrial applications such as automobiles and aerospace. Magnesium is one of the lightest structural material that has high specific strength, lightweight, low density and good formability. However, current issue of using magnesium alloy is that magnesium has weakness against temperature. As the temperature increases, magnesium undergoes poor creep resistance and ease of softening, and therefore, its mechanical strength decreases sharply. To solve this issue, a new type of magnesium alloy that retains high strength at high temperature has been proposed. The tribological behavior of this alloy was investigated using a tribotester with reciprocating motion and heating plate. A stainless steel ball was used as a counter surface. Results showed that extrusion process has similar wear behavior to the commonly used casting process but retains good mechanical strength and durability. The presence of an alloying element enhanced the wear properties especially in high temperature. This study is expected to be utilized as fundamental data for the replacement of high density materials currently used in mechanical industries to a much lighter and durable heat-resistant materials.

• 한국식품과학회지
• /
• 제15권4호
• /
• pp.392-398
• /
• 1983

식품 압출성형기 (Food Extruder)의 기계적 성질과 제품 특성을 이해하기 위하여 다목적 Pilot plant 용 Single-Screw Extruder를 제작하고 corn grits를 사용한 Extrusion-cooking process의 기계적 성질과 제품 특성을 조사 하였다. Start-up 기간에서 스크류우 회전속도에 따른 열 발생속도를 측정하여 다음과 같은 결론을 얻었다. Start-up 기간에서의 열 발생속도는 스크류우 회전속도 및 원료사입속도에 직접적인 영향을 받았다. 추정된 바렐내부에서의 반죽의 점도는 스크류우 회전속도에 크게 영향을 받았으며 이 점도의 변화로 바렐내부에서의 가열 용융반응이 진행되는 정도를 예측할 수 있었다. Start-up 기간에서의 팽화율은 주로 바렐내부의 온도와 열용융 반응이 일어난 정도에 의존하였다. Corn Grits가 호화되는 바렐온도와 탄화가 일어나는 온도는 회전속도에 따른 체재시간에 크게 영향을 받았다.

• 한국식품과학회지
• /
• 제30권5호
• /
• pp.1128-1133
• /
• 1998

압출성형에 의한 난소화성 전분형성효과를 알아보고자 식품산업에 널리 이용되는 쌍축형(twin-screw) 압출성형기(extruder)를 사용하여 일반적으로 난소화성 전분 형성에 많이 사용되는 고아밀로즈 옥수수 전분의 압출성형 실험을 행하였다. 압출성형시 압출조건에 따른 난소화성 전분수율을 회분식 고압가열과 냉각에 의한 난소화성 제조방법과 비교, 실험하였다. 압출성형 조건은 스크류 회전 속도를 100 rpm으로 고정하여 바렐온도(100, 120, $140^{\circ}C$) 3가지 조건과 투입원료 수분함량(25, 35, 45%) 3가지 조건으로 총 9가지 조건에서 압출성형하였다. 또한 압출성형 전분의 $4^{\circ}C$ 저장시의 난소화성 수율 변화를 측정하였다. 난소화성 전분 측정법으로는 생체내 소화효소 반응과 유사한 pancreatin을 이용한 방법과 내열성 아밀라제 (Termamyl)에 의한 방법 2가지를 비교 실험하였다. Pancreatin을 이용한 난소화성 전분 수율 비교시 바렐온도가 낮을 때$(100^{\circ}C)$와 원료수분함량이 높을 때(45%)의 압출성형 전분이 가장 높은 수율(38.4%)을 나타내어 회분식 가열 냉각 5회 반복 처리한 시료의 난소화성 수율(25%) 보다 높았다. 같은 압출성형조건에서는 일반 전분의 압출성형전분이 고아밀로즈 압출성형 전분보다 낮은 난소화성 전분수율을 나타냈다. 내열성 아밀라제(Termamyl)에 의한 전분 수율 비교시, 회분식 가열냉각 5회 처리 시료는 27.5%의 수율을 보였으며 이는 압출 성형 전분의 난소화성 수율$(11.6{\sim}15.4%)$보다 다소 높은 값을 보였으며 같은 압출성형 조건에서 일반전분의 압출성형전분이 고아밀로즈 압출성형 전분보다 낮은 난소화성 전분수율을 나타냈다. 압출성형 고아밀로즈전분의 $4^{\circ}C$ 저장실험에서 4주 저장후 난소화성 수율은 pancreatin을 이용한 경우에는 바렐온도가 낮은 경우$(100^{\circ}C)$ 3가지 투입원료 조건(25, 35, 45%) 모두에서 60% 수준의 높은 난소화성 수율을 보였으나 내열성 아밀라제를 사용한 난소화성 수율은 상대적으로 낮은 값을 나타내었다. 이는 압출성형 전분의 $4^{\circ}C$ 저장시 호화된 전분의 일부 재결정화로 형성된 난소화성 전분이 $95^{\circ}C$ 30분간의 열처리 및 내열성 아밀라제의 처리에 의해 분해가능한 전분으로, 완전한 결정성구조를 가진 전분이 아닌 것으로 사료된다.

• 한국식품영양과학회지
• /
• 제45권12호
• /
• pp.1769-1775
• /
• 2016

무청은 무의 지상부 엽채를 말하며, 우리나라에서는 주로 건조하여 국이나 나물로 조리하여 이용하였고, 영양학적으로 35% 이상의 식이섬유 및 20% 내외의 단백질, 철분 및 칼슘 등을 함유하고 있다. 그러나 무청의 주요 성분인 글루코시놀레이트는 가공과정 중 발생하는 이취에 주된 원인물질이며, 이러한 이취는 무청을 이용한 가공식품의 원료로 사용하는 데 제한적 요인이 되고 있다. 따라서 본 연구에서는 압출성형 조건에 따른 무청 분말의 항산화 활성 및 이취성분 변화에 관하여 알아보기 위하여 압출성형 독립변수 중 배럴 온도, 스크류 회전속도 및 수분함량을 조절하여 압출성형 무청 추출물의 추출 수율, 총폴리페놀 함량, 총플라보노이드 함량, 총글루코시놀레이트 함량 및 이취 성분을 분석하였다. 추출 수율 및 항산화 활성은 배럴 온도가 증가함에 따라 유의적으로 증가하였다. 압출성형 최적조건인 배럴 온도($130^{\circ}C$), 스크류 회전속도(250 rpm) 및 수분함량(20%)에서 총글루코시놀레이트 함량은 일반 무청 분말보다 약 1.5배 감소하는 경향을 나타냈으며, 이러한 황화합물의 함량 변화에 관한 정확한 성분을 분석한 결과 압출성형공정은 무청의 이취물질(methyl mercaptan, dimethyl sulfide, carbon disulfide, dimethyl disulfide 및 dimethyl trisulfide) 함량을 효과적으로 감소시켜 무청의 이취를 감소시키는 것으로 관찰되었다.

• 한국식품과학회지
• /
• 제39권2호
• /
• pp.146-151
• /
• 2007

고식이섬유 쌀인 고아미 2호의 식품소재로서의 활용을 모색하고자 압출성형공정으로 고아미 후레이크를 제조한 다음 후레이크의 효소저항전분(RS) 함량, 페이스트 점도, 수분용해지수와 수분흡착지수, 체적밀도, 색도, 압착강도, 조직감 유지시간 등 품질 특성을 조사하였다. 압출성형 공정조건은 배럴온도 90, 110, $130^{\circ}C$ 그리고, 수분함량 50, 55%이었다. 압출성형 펠릿과 탈지한 후레이크의 RS함량은 각각 $8.00{\sim}8.56%$, $6.57{\sim}9.53%$ 범위로 수분함량이 50%에서 55%로 증가함에 따라 증가하는 경향을 나타내었다. 압출성형 펠릿과 탈지한 후레이크의 최고점도, 최저점도, 최종점도, 회복점도는 1시간 수침한 고아미에 비해 감소하는 경향을 나타내었고 구조파괴점도는 현저히 증가하는 경향을 나타내었다. 탈지한 후레이크의 수분용해지수와 수분흡착지수가 고아미 원료와 압출성형 펠릿보다 크게 증가하는 경향을 나타내었다. 압출성형 펠릿의 수분용해지수는 고아미 원료에 비해 감소하는 경향을 나타내었으며 수분흡착지수는 증가하는 경향을 나타내었다. 후레이크의 체적밀도는 $0.35{\sim}0.44$ g/mL 범위로 큰 차이를 나타내지 않았고 조직감 유지시간은 $12.4{\sim}19.4$분 범위로 시판 breakfast cereal들 보다 긴 유지시간을 나타내었다.