• Preventive Nutrition and Food Science
• /
• v.11 no.1
• /
• pp.61-66
• /
• 2006

The objective of this study was to compare the color and microstructure of powder, redness, brownness, and antioxidative activity in extruded ginseng, white ginseng and red ginseng extracts. The colors of extruded dry ginseng powder (moisture content 30%, barrel temperature $110^{\circ}C$, and screw speed 200 rpm) were similar to those of red ginseng. Intact cell wall structure was examined in dried root ginseng at $70^{\circ}C$ (A), white ginseng with skin (D), white ginseng without skin (E), and red ginseng (F) under a scanning electron microscope. The cell wall was not detected in samples B and C (dry ginsengs extruded with 25% and 30% moisture contents, respectively). Intact starch granules were detected in samples A, D, and E under a scanning electron microscope. Melted starch granules were detected in samples B, C, and F. Colors (L, a, b) of 50% EtOH extracts were similar in samples C and F. Browniness and redness of extracts were high in extruded dry ginseng and red ginseng extracts. Extruded dry ginseng (B) showed higher electron donation ability and phenolic content than the other samples.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.4
• /
• pp.528-534
• /
• 2011

This study was conducted to investigate the changes in saponin content and antioxidant activity of crude ginseng and extruded ginseng by using different solvent extraction methods. Each of the fractions was first extracted by 80% ethanol followed by ether treatment to remove the lipid components. Water soluble components were separated by ethylacetate and water saturated butanol. Four fraction, including 80% ethanol, ethylacetate, butanol and water were obtained from crude and extruded ginsengs to analyze saponin content and antioxidant activity. Saponin content and antioxidant capacity of each of the four fractions were measured by LC/MS analysis and ORAC(Oxygen Radical Absorbance Capacity) assay, respectively. It was found that a major portion of saponin was present in ethyl acetate and water saturated butanol fractions. When extracted by 80% ethanol, ginsenoside Rb1 and Rg1 were mostly found in crude ginseng, while ginsenoside Re and Rb1 were detected in extruded ginseng. Even though Rh1 and Rg3 were found in a very small quantity in crude ginseng, there was a significant quantity of both in extruded ginseng when extracted by 80% ethanol. Similar tendency was also observed in extruded ginseng fraction when extracted with ethyl acetate and butanol. In crude ginseng, the level of Rg1 was the highest among other ginsenosides upon extraction by ethyl acetate, while Rh1 and Rg3 were predominantly found by employing similar solvent extraction in the extruded ginseng. Also, Rg1, Re and Rb1 were also found in the extruded ginseng with small quantity. Rg1, Re and Rb1 were found in crude ginseng by butanol extraction, while Rb1 and Re were extracted from the extruded ginseng. Overall, there was no difference in the saponin content between crude ginseng and extruded ginseng when extracted by butanol and water, but twice as much of saponin was obtained by 80% ethanol extraction and 6 times more saponin were obtained in ethyl acetate fraction in the extruded ginseng. Antioxidant capacity of crude ginseng as determined by ORAC assay was higher in 80% ethanol(high in many different kinds of biological compounds) and water saturated butanol(high in polar saponin) fractions than the ethyl acetate and water fractions. No difference in antioxidant capacity was observed between crude and extruded ginseng. However, antioxidant capacity of ethyl acetate and water fractions in extruded ginseng was significantly higher than crude ginseng($P$ >0.05). All the fractions in both, crude and extruded ginseng possessed antioxidant capacity and even water fractions that contained almost no saponin had some antioxidant capacity. While determining correlation coefficient between fractions in extruded ginseng by Pearson correlation, it was observed that 80% ethanol fraction was in correlation with ethyl acetate($P$ >0.01) and ethanol($P$ >0.001) and in the case of ethylacetate, correlation was observed only with butanol fraction($P$ >0.05).

• Food Science and Biotechnology
• /
• v.17 no.6
• /
• pp.1191-1196
• /
• 2008

The antibacterial and antioxidant potentials of extruded ginseng extract (EGE) with 60% ethanol and methanol were investigated. The inhibitory activity of the EGE in Gram-positive bacteria was significantly higher than in Gram-negative bacteria. Higher antibacterial activity was observed with methanol ginseng extract when moisture content and barrel temperature were 20% and $115^{\circ}C$, respectively, that diameter of inhibition zone at 1,500 mg/mL was $15.40{\pm}0.13\;mm$ for Bacillus subtilis and $9.31{\pm}0.05\;mm$ for Salmonella typhimurium. The amount of total phenolics was highest in extruded ginseng at 20% moisture content and $115^{\circ}C$ barrel temperature. Especially, a positive correlation was observed between the total phenolic content and antioxidant activity of the extracts. In the 2,2-diphenyl-1-picryhydrazyl radical (DPPH) system, all tested extract of extruded ginseng at 20% moisture content exhibited very strong antioxidant properties when compared to red ginseng with percent scavenging effect of 23-35% at 20mg/mL. In conclusion, it can be said that the extracts of extruded ginseng could be used as natural antimicrobial and antioxidant agents in the food preservation.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.3
• /
• pp.402-408
• /
• 2007

This study was conducted in order to evaluate the antioxidant activity of extruded ginseng in different extracted fractions. Each of the fractions obtained from extruded ginseng and ginseng (control) were extracted with 80% ethanol, and then the lipophilic components were removed with ether while the hydrophilic components were separated with water-saturated butanol. Each of the 80% ethanol/butanol/water layers were collected and evaporated to acquire samples for tests of saponin content and antioxidant activity. The antioxidant activity of extruded ginseng fractions and ginseng fractions were determined via the oxygen radical absorbance capacity (ORAC) assay. Overall, the extruded ginseng samples harbored saponin contents of 2.2 (Rg1), 2.3 (Re), 1.2 (Rc), 1.3 (Rb2), and 2.2 (Rd) times that measured in the ginseng prior to extrusion. Antioxidant capacity was also higher, not only in the 80% ethanol/butanol which harbor a significant quantity of saponin, but also in the water fractions, which harbor relatively low quantities of saponin as compared to the control samples. All three of the fractions extracted from extruded ginseng evidence significantly higher antioxidant capacity than the controls (0.05

• Journal of Ginseng Research
• /
• v.37 no.2
• /
• pp.219-226
• /
• 2013

This study was conducted to investigate the effect of extrusion conditions (moisture content 20% and 30%, screw speed 200 and 250 rpm, barrel temperature $115^{\circ}C$ and $130^{\circ}C$) on the acidic polysaccharide, ginsenoside contents and antioxidant properties of extruded Korean red ginseng (KRG). Extruded KRGs showed relatively higher amounts of acidic polysaccharide (6.80% to 9.34%) than non-extruded KRG (4.34%). Increased barrel temperature and screw speed significantly increased the content of acidic polysaccharide. The major ginsenosides (Rb1, Rb2, Rc, Rd, Re, Rf, Rg2s, Rg3s, Rh1, and Rg3r) of KRG increased through extrusion, while the ginsenoside (Rg1) decreased. The EX8 (moisture 30%, screw speed 250 rpm, and temperature $130^{\circ}C$) had more total phenolics and had a better scavenging effect on 2,2-diphenyl-1-picrylhydrazyl radicals than those of extruded KRG samples. The extrusion cooking showed a significant increase (6.8% to 20.9%) in reducing power. Increased barrel temperature significantly increased the values of reducing power, the highest value was 1.152 obtained from EX4 (feed moisture 20%, screw speed 250 rpm, and temperature $130^{\circ}C$). These results suggest that extrusion conditions can be optimized to retain the health promoting compounds in KRG products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.2
• /
• pp.247-254
• /
• 2005

The objective of this study is to compare the chemical properties of red ginseng, white ginseng, and extruded ginseng. Six kinds of samples were prepared and examined their chemical components. The comparison among crude ash, crude lipid, and total sugar resulted insignificant difference. White ginseng had lower content of reducing sugar than those of extruded ginseng and red ginseng. Total amino acid was found relatively low in treatment A (sliced whole root and dried at 7$0^{\circ}C$). Total amino acid of treatment C (extruded dry whole root ginseng slices, moisture content 30%, barrel temperature 11$0^{\circ}C$, and screw speed 200 rpm) was higher than that of treatment B (extruded dry whole root slices, moisture content 25%, barrel temperature 11$0^{\circ}C$, and screw speed 200 rpm). Crude saponin of treatments A, B, C, D (white ginseng with skin), E (skinless white ginseng), and F (red ginseng) were 4.02, 4.77, 4.12, 3.56, 3.25, and 4.02%, respectively. Ginsenoside was contained similarly as crude saponin. The amount of ginsenoside in the treatment of A, B, C, D, E, and F was recorded respectively at 6.031, 8.108, 6.876, 7.978, 5.591, and 9.834 mg/g. A specific component in red ginseng, $R_{g3}$ was detected in treatment F. Maltol was detected in treatment Band F. Acidic polysaccharide was increased 2∼3% by extrusion process. In conclusion, extruded ginseng had similar components to those of red ginseng.

• Korean Journal of Food Science and Technology
• /
• v.44 no.4
• /
• pp.411-416
• /
• 2012

This study was carried out to investigate the effects of the extrusion process on the change of components in ginseng. The extraction yields from ginseng by distilled water extraction were highest in the extruded ginsengs, whereas it was lowest in the white ginseng. The contents of crude saponin were highest in the extruded ginseng, and they increased as the extrusion temperature was raised. The total contents of 11 kinds of ginsenosides increased in the order of red, white and extruded ginsengs. In particular, red ginseng showed higher contents of Rg1, Rg3 and Rb2, whereas Re was highest in white ginseng. In addition, the contents of Rg2, Rh1, Rh2 and Rg3 in the extruded white ginseng became higher. Free sugar contents were greatest in red ginseng. However, they were lowest in the extruded ginseng. White ginseng had a greater L value, whereas extruded ginseng demonstrated higher a and b values. In conclusion, the extraction yields, the contents of saponin, and ginsenoside-Rg2, Rh1, Rh2 and Rg3 were increased through the extrusion process.

• Preventive Nutrition and Food Science
• /
• v.11 no.4
• /
• pp.318-322
• /
• 2006

The objective of this experiment was to investigate the effect of extrusion of ginseng roots in twin screw extruder on susceptibility of ginseng starch toward hydrolysis by ${\alpha}-amylase$ BAN 480L (Novozyme, Denmark) and cellulase Celluclast 150L and saccharification by amyloglucosidase AMG-E (Novozyme, Denmark). The extrusion was conducted at 22% and 30% moisture contents of feed at screw speed 300 rpm. Barrel temperature at zone 1 was adjusted at $100^{\circ}C$ and $120^{\circ}C$. The results showed that extrusion process improved the ginseng ${\alpha}-amylase$ susceptibility as compared to traditionally dried ginseng (white and red ginseng). Reducing sugar of hydrolyzed extruded samples was 2,500% of its initial concentration, whereas the reducing sugar of hydrolyzed non-extruded sample was only 200% of its initial concentration. However, addition of cellulase during liquefaction lowered the saccharification yield of both non-extruded and extruded samples as well.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.2
• /
• pp.306-310
• /
• 2005

The comparison in release rate constant and properties of extracts from extruded raw ginseng and extruded white ginseng was conducted to apply extrusion process for manufacturing of released ginseng tea bag. Dry raw ginseng and white ginseng powder were extruded at 20∼30% moisture content and 200∼300 rpm by using an experimental twin-screw extruder. Browness and redness (both indicated the releasing of saponin and ginsenosides) were increased with the increase in the screw speed and the decrease of moisture content. Crude saponin and water solubility index (WSI) of both ginseng also share the same behaviour against the level of screw speed and moisture content, as well as browness and redness. The particle size effects of extruded raw ginseng at 20% and 28% moisture content on absorbance of released extract at 260 up to 560 nm, WSI, and water absorption index were determined. While particle size decreased from 800∼1000 nm to 200∼500 nm, absorbance and WSI are decreased. Absorbance and WSI shown increasing level while moisture content was decreased. In conclusion, the formation of pores by expansion and disruption of cell wall in extrusion cooking were obviously responsible to increase the amount of released extract of extruded ginseng and its WSI as well. The extrusion process turns out be the efficient process for manufacturing of commercial ginseng tea product than those of other thermal processes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.12
• /
• pp.1654-1659
• /
• 2008

The aim of this study was to compare the fermentation characteristics of tissue cultured mountain ginseng, extruded tissue cultured mountain ginseng, and root hair of red ginseng. Also, pH, acidity, brix, reducing sugar, total sugar, and alcohol were analyzed. The extrusion conditions were barrel temperature of 110 and $140^{\circ}C$ and moisture content of 25 and 35%. Fermentation temperature was $27^{\circ}C$ for 15 days and the cultivation was fixed with Saccharomyces cerevisiae, Aspergillus usamii, and Rhizopus japonicus. The results showed that pH, brix, reducing sugar content, and total sugar content of fermented broths were decreased after 5 days and then maintained steadily for the following 10 days. Acidity of final fermented broths were 1.12% (root hair of red ginseng), 1.19% (tissue cultured mountain ginseng), and $0.97{\sim}1.02%$ (extruded tissue cultured mountain ginseng), respectively. Alcohol content of final fermented broths were 3.82% (root hair of red ginseng), 0.91% (tissue cultured mountain ginseng), and $1.86{\sim}2.18%$ (extruded tissue cultured mountain ginseng). The fermentation efficiency of extruded tissue cultured mountain ginseng (barrel temperature $140^{\circ}C$, moisture content 25%) were the highest. In conclusion, the fermentation efficiency was increased by extrusion process.