• 분석과학
• /
• 제19권6호
• /
• pp.455-459
• /
• 2006

The extraction and separation of glabridin from licorice root by HPLC was performed in this work. First, by investigating the different extraction solvents, extraction methods and extraction times, a one-hour ultrasonic extraction procedure with ethyl acetate as the extraction solvent was optimized. Then the ethyl acetate extraction was applied to RP-HPLC for separation of glabridin. The column efficiencies and resolutions were experimentally investigated with different mobile phase compositions. Baseline separation of glabridin was obtained under the mobile phase composition of 50/50 vol.% (ACN/water). The retention time of glabridin was 20.3 min. The peak of glabridin was collected from the HPLC elution for several times and identified by LC/MS. Under the optimum extraction and HPLC separation methods, 1.26 g of glabridin per kg licorice root could be extracted.

• Food Science and Biotechnology
• /
• 제16권1호
• /
• pp.150-153
• /
• 2007

Hydrocarbons have been successfully used as a chemical marker in order to identify irradiated from non-irradiated foods. The method for determining hydrocarbons consists of extraction of fats, followed by separation of hydrocarbons by florisil column chromatography, and then identification of hydrocarbons by GC/MS. Currently, solvent extraction method for fats has certain limitations with regard to extraction time and solvent consumption. Commercial hams and sausage were irradiated at 0 and 5 kGy, and the efficiency of microwave-assisted extraction (MAE) and conventional solvent extraction (CSE) methods on the extraction of radiation-induced hydrocarbons from the meat products was compared. Significant levels of hydrocarbons, mainly composed of 1,7-hexadecadien, 1,7,10-hexadecatriene, and 6,9-heptadecadiene, were detected in the extracts from irradiated hams and sausages by both CSE and MAE methods. Both methods were acceptable in extracting hydrocarbons from samples, but MAE method required apparently reduced amounts of solvent from 150 (CSE) to 50 mL and reduced extraction time from 23 (CSE) to 5 min.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.255-255
• /
• 2017

Sesame has been consumed for centuries as flavoring ingredient in eastern Asian countries, especially Korea. Sesame seeds have been used as health food for traditional medicine to prevent disease in Asian countries for several thousand years. Sesame seed has higher oil content (around 50%) than most of the known oilseeds. Sesame oil is rich in monounsaturated and polyunsaturated fatty acids. Extraction of sesame has developed significantly over the years. The mechanical method was an early means of separation which was physical pressure to squeeze the oil out. Nowadays, solvent extraction becomes the commonly used commercial technique to recover oil from oilseeds. In this study, we investigated extraction efficiency and quality of oil affected by cultivars and extraction methods of sesame seed. Different variables were investigated; roasting temperature ($170{\sim}220^{\circ}C$), extraction methods (solvent and physical pressure), forced ventilation system and cultivars. The Contents of B(a)P in sesame oil after roasting at $170{\sim}220^{\circ}C$ were 0.30~2.53 ppm. When we introduced forced ventilation system during roasting, B(a)P Contents were decreased up to 36%. The Oil extraction efficiency on sesame seed was statistically depending on the cultivars and extraction methods. The oil extraction yields of solvent and physical pressure extraction were 56.3% and 44.6%, respectively. Many of sesame cultivars and genetic resources are linolenic acid content of less than 0.5%. The results supported that we have developed a safe and high quality sesame oil processing methods for small and medium-sized companies.

• KSBB Journal
• /
• 제19권6호
• /
• pp.421-426
• /
• 2004

토종콩으로부터 비배당체 이소플라본을 추출하기 위한 다양한 기계적 및 화학적 방법을 적용하였다. 용매추출법의 침적과 교반, 초음파에너지와 아임계/초임계 수 추출이 포함되었다. 용매의 조성에 의한 추출효율의 증가, 교반에 의한 특정성분의 추출효과의 증대, 초음파에너지에 의한 추출성능의 개선, 용매보다 용해력이 좋은 초임계유체의 적용에 관한 실험을 수행한 결과에 의하면 비배당체 이소플라본의 추출은 초음파에너지에 의한 것이 가장 우수하였다.

• 한국산업보건학회지
• /
• 제9권2호
• /
• pp.135-144
• /
• 1999

The purposes of this study were to survey types of pretreatment methods adopted by industrial hygiene laboratories in Korea for extracting heavy metals in welding fume samples and to compare performances of two pretreatment methods, the acid extraction and the microwave digestion, in extracting heavy metals contained in the real workplace samples from various welding jobs including arc, argon, and carbon dioxide. A total of 25 analytical chemists in the industrial hygiene laboratories participating the quality control program directed by the Korea Industrial Safety Corporation were interviewed by telephone. For the purpose of comparing performance of extracting heavy metals from real workplace samples, a total of 53 welders from 21 workplaces located in Anyang, Uiwang, and Kunpo areas were sampled from the period of March 22, 1999 to April 20, 1999. It was found that the most frequently adopted method for samples from the quality control program was the acid extraction method(40%) followed by the NIOSH 7300 method(36%). The NIOSH method, however, was the dominant method(36%) for samples from workplace followed by the acid extraction method(28%). In this study, two extraction methods, the acid extraction and the microwave digestion, were compared in terms of recovery rate, accuracy, and precision for both manganese and chromium. Both methods produced comparable results for the samples prepared for the quality control program. In contrast, concentrations of two heavy metals determined from real workplace samples pretreated with the microwave digestion method were statis tically significantly higher, manganese(166%) and chromium (200%), than those of utilizing the acid extraction method. These findings were consistent regardless of types of welding techniques used. The results of this study clearly show the importance of verifying the analytical performances of extraction methods for heavy metals not only for the samples from the quality control program but also from the real world samples collected from welding jobs.

• 한국식품위생안전성학회지
• /
• 제2권2호
• /
• pp.83-88
• /
• 1987

추출방법과 용매가 조 채종유중의 미량성분과 그 자동산화성에 미치는 영향에 관해 검토하였다. 불검화물과 Sterol 함량은 추출방법(Twisselmaun과 Soxhlet)과 사용한 용매의 종류(Pentan, Hexan, Heptan) 종류에 따라 변화되지 않았으며 Chlorophyll 함량은 추출용매의 분자량의 증가에 따라 증가되고 사용된 추출법 상호간에는 Chlorophyll 수율에 유의한 영향을 미치지 않았다. 채종유가 자동산화되는 경향을 추출용매의 비점이 상승함에 따라 증가되는 것으로 관찰되었다.

• 정보관리학회지
• /
• 제26권1호
• /
• pp.305-320
• /
• 2009

웹을 통해 제공되는 뉴스 페이지의 경우 필요한 정보 뿐 아니라 많은 불필요한 정보를 담고 있다. 이러한 불필요한 정보는 뉴스를 처리하는 시스템의 성능 저하와 비효율성을 가져온다. 이 연구에서는 웹 페이지로부터 뉴스 콘텐츠를 추출하기 위해 문장과 블록에 기반한 뉴스 기사 추출 방법을 제시하였다. 또한 이들을 결합하여 최적의 성능을 가져올 수 있는 방안을 모색하였다. 실험 결과, 웹 페이지에 대해 하이퍼링크 텍스트를 제거한 후 문장을 이용한 추출 방법을 적용하였을 때 효과적이었으며, 여기에 블록을 이용한 추출 방법과 결합하였을 때 더 좋은 결과를 가져왔다. 문장을 이용한 추출 방법은 추출 재현율을 높여주는 효과가 있는 것으로 나타났다.

• 펄프종이기술
• /
• 제39권5호
• /
• pp.45-51
• /
• 2007

This study was carried out to investigate various heavy metal contents in packaging papers by pre-treatments for ICP-ES (Inductively Coupled Plasma Emission Spectrometry) analysis. Pre-treatment methods of heavy metals in this study include extraction, migration and decomposition methods (dry ashing, $HNO_3-HClO_4-HF,\;HNO_3,\;and\;H_2SO_4-HNO_3$). Test results were compared with conventional extraction (water) and migration (3% acetic acid) methods. The five representative heavy metals (Cd, As, Pb, Cr and Hg) were analyzed. For Cd, Hg, and As, the results were below detection limit of the instrumental technique. It was considered that the migration test was a better method compared to extraction test, but all the decomposition methods showed much higher detection values than the extraction or migration test. In case of recycled corrugated containers, 3% acetic acid solution extracted about 25% of chromium and 30% of lead compared to the content by decomposition methods. Among all decomposition methods, the nitric acid - perchloric acid - hydrofluoric acid treatment brought a slightly higher detection value than others, but there was no significant difference among them except sulfuric acid - nitric acid method.

• Journal of Acupuncture Research
• /
• 제33권3호
• /
• pp.17-28
• /
• 2016

Objectives : This study was designed to investigate the analgesic effects of Taxus cuspidata pharmacopuncture(TCP) at KI03 on formalin-induced pain in rats and to evaluate the efficiency of different extraction methods of Taxus cuspidata(TC). Methods : 30 rats were divided into 5 groups, each consisting of 6 rats. Each of the groups was treated two times. The first treatment for its right KI03 was as follows: rats were treated with normal saline(NOR), normal saline(CON), hot-water extraction of TC(W), ethanol extraction of TC(E), and ultrasonification extraction of TC(U). The second treatment was given 35 mins after the first one. Rats in NOR were treated with normal saline at their hind-paw. All groups, except NOR, were treated with formalin(5 %, $40{\mu}{\ell}$) at their hind-paw. To evaluate pain behavior, Ultrasonic vocalization(USV) was examined to be around 18~30 kHz. After analysis of USV, blood samples were taken from the rats for analysis of Substance P, aspartate aminotransferase(AST) and alanine aminotransferase(ALT). Results : In the experimental groups, USV was significantly decreased compared with CON and similar to that of NOR in the early phase. But there were no significant differences among the three extraction methods of TC. In addition, Substance P of W was significantly decreased. AST and ALT activation showed no significant differences among the 5 groups. Conclusion : These results show that regardless of extraction methods of TC, TCP at KI03 has analgesic effects in the early phase on formalin-induced pain in rats. In particular, hot-water extraction of TC significantly reduces Substance P activation.

• 폴리머
• /
• 제32권1호
• /
• pp.13-18
• /
• 2008

전기 전자재료 중 고분자에 포함된 브롬계 난연제의 분석에 있어 용출이 어려운 4가지 재질 PC(polycar-bonate) PP(polypropylene), PET(poly(ethylene terephthalate)), PBT(poly(butylene terephthalate))에 대하여 추출방법 및 헥산/에세톤, THF, 톨루엔, THF/톨루엔에 대한 용매 특이성과 그 특성을 고찰하였다. 각 고분자에서의 deca-BDE(decabromo diphenyl ether)의 함량을 속슬렛, 초음파. 가속용매, 마이크로파, 초임계 유체 추출법을 사용하여 이들 방법의 효율을 정량분석 하였다. 초음파 추출은 낮은 고분자의 용해도 때문에 낮은 추출효율을 보여 사용한 고분자의 경우에 있어서 추출방법으로는 적합하지 않았으며, 나머지 3가지 방법에서는 톨루엔 사용시 약 80% 이상의 높은 추출효율을 보였다. 초임계 유체 추출은 고분자의 난연제 추출에 시도되지 않았던 방법이었으나, 본 실험에서 PP와 PC의 추출에서는 100%에 가까운 매우 높은 추출효율을 보였다.