• Resources Recycling
• /
• v.23 no.1
• /
• pp.17-24
• /
• 2014

Solvent extraction experiments have been performed to separate Nd and Pr from chloride leaching solution of monazite sand using PC88A and D2EHPA. For this purpose, the effect of the saponification of PC88A and D2EHPA on the extraction and separation of the two metals were studied by varying the pH of aqueous solution. In the experimental ranges conducted in this study, the distribution coefficients of Nd were higher than those of Pr and separation factor value increased with the increase of solution pH. Saponification of PC88A enhanced the distribution coefficients of Nd and Pr as well as the separation factor. Saponification of D2EHPA had some effect on the extraction of the two metals but little effect on the separation factor.

• Resources Recycling
• /
• v.25 no.2
• /
• pp.3-9
• /
• 2016

Separation of Zr(IV) and Hf(IV) from sulfuric acid solutions was investigated by extraction with several acidic extractants such as Versatic acid, LIX 63, and Cyanex 301. From strong sulfuric acid solutions, the separation of Zr(IV) and Hf(IV) by Versatic acid and LIX 63 was not possible, while selective extraction of Hf(IV) over Zr(IV) was obtained with Cyanex 301. However, the extraction percentage of the two metals was much lower compared to that by D2EHPA. Mixing of TBP with Cyanex 301 and D2EHPA led to negative effect on the extraction and separation of the two metal ions. The difference in the extraction reaction and separation selectivity between HCl, $HNO_3$ and $H_2SO_4$ media with each extractant was discussed.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.11-19
• /
• 2013

Recovery of pure cobalt and nickel from diverse resources is important due to the increased demand for these metals. In order to get cobalt and nickel with high purity, separation of them from other metal ions is necessary. In this review, several methods to obtain pure cobalt or nickel solution, such as solvent extraction, ion exchange, precipitation were introduced and compared. For solvent extraction, the advantage and disadvantage of the separation process together with detailed process conditions were investigated.

• Journal of Environmental Health Sciences
• /
• v.10 no.1
• /
• pp.87-92
• /
• 1984

Extraction method of ginseng saponin by Extrelut column was studied as compared with that by phase separation. The results obtained were as follows: 1. Extraction time consumed by Extrelut column was 2 ~ 3 hours and much shorter as compared with that by phase separation. 2. Recovery rates Of ginsenoside by Extrelut column method were 97.8 ~ 106.1% and much higher as compared with those by phase separation method.

• Journal of Environmental Science International
• /
• v.9 no.2
• /
• pp.159-164
• /
• 2000

For the purpose of development of a liquid membrane permeator which separates metal ions from aqueous solutions continuously and effectively, a continuous membrane permeator with the membrane solution trapped between extraction and stripping phases by two micro-porous hydrophilic films was manufactured. Experimental researches on the separation of zinc ion from aqueous solutions were performed in the liquid membrane permeator with 30 vol % D2EHPA solution in kerosine as liquid membrane. As results, the liquid membrane permeator separates zinc ion from aqueous solutions continuously and effectively in the wide range of operating conditions. A simple mass transfer rate model using equilibrium constant of the extraction reaction for the system used were proposed, and the model was compared with experimental results of separation of zinc ion in the permeator. And the effects of operating factors, such as space time, pH of extraction solution, extraction temperature, on the separation rate of zinc ion in the permeator were experimentally examined.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.631-639
• /
• 2015

Extraction/separation of cobalt by solvent extraction is reviewed. Separation of cobalt using various reagents and also cobalt recovery from scrap using commercial extractant were analyzed. The separation ability for cobalt followed the order of phosphinic > phosphonic > phosphoric acid due to the increasing stabilization of tetrahedral coordination of cobalt complexes with the extractant in the organic phase. Depending upon the solution composition, commercial extractants like Cyanex 272, D2EPHA and PC 88A should primarily be used for commercial extraction processes and also the efficient management of their combination could address various separation issues associated with cobalt bearing scrap.

• Korean Journal of Materials Research
• /
• v.34 no.5
• /
• pp.247-253
• /
• 2024

The separation of zirconium and hafnium using tributyl phosphate (TBP)-Dodecane extractants in nitric acid medium was performed. Zirconium oxychloride, used as extraction feed, was obtained from the synthesis of Kalimantan zircon sand concentrate smelted using NaOH. The extraction process was carried out by dissolving chloride-based metals in nitric acid media in the presence of sodium nitrate using TBP-Dodecane as an extractant. Some of the extraction parameters carried out in this study include variations in organic phase and aqueous phase (O/A), variations in contact time, and variations in nitric acid concentration. Extraction was carried out using a mechanical shaker according to the parameter conditions. X-ray fluorescence (XRF) was used for elemental (Zr and Hf) composition analysis of the aqueous solution. The results showed that zirconium was separated from hafnium at optimum conditions with an organic/aqueous ratio of 1:5, contact time of 75 min, and an HNO₃ concentration of 7 M. The resulting separation factor of zirconium and hafnium using TBP-Dodecane was 14.4887.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1081-1084
• /
• 1999

This paper proposes a method of extracting automobile license plate information using color image processing and separation of character regions. The hue and saturation of color information is need for license plate extraction and the specified standard location ratio is need for character region separation. Simulation results show that the proposed algorithm can detect license plates and separate character regions successfully.

• Resources Recycling
• /
• v.20 no.2
• /
• pp.60-66
• /
• 2011

Solvent extraction experiments were carried out to recover and separate Ru(III) from aqueous hydrochloric acid media using TBP and Cyanex923. The efficiency of the extraction was studied under various experimental conditions, such as concentration of HCl and NaCl, concentration of extractant in the organic phase and temperature. The extraction behavior of metal impurities, such as Pt, Bi, Sn, Fe, Pb and Cu in mixed solutions was examined. From the experimental studies, it was found that the Cyanex923 resulted in higher extraction percentage of Ru than TBP. However TBP was more effective for the separation of Ru and Pt, Bi, Sn in mixed solutions than Cyanex923.

• Resources Recycling
• /
• v.26 no.2
• /
• pp.3-10
• /
• 2017

Rare earth elements with high purity are demanded for the manufacture of advanced materials. Light rare earth elements are contained in domestic monazite and Ni-MH batteries. In this paper, solvent extraction to separate the light rare earth elements from hydrochloric acid leaching solutions of these resources was discussed. A mixture of cationic and tertiary amine shows synergistic effect on the extraction of LREEs and the extent of pH decrease during extraction is reduced. The effect of solution pH on the extraction and synergism was reviewed. Acquisition of the operation data with mixer-settler on the separation of LREEs by this mixture is necessary to develop a process.