• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.1
• /
• pp.59-66
• /
• 2014

The central seam, the vertical 'line' between doors, in the front view of a refrigerator must have its gap and flush within certain ranges to meet functional and aesthetic requirements. The conventional criteria for gap and flush control in the industry are to keep the gap and flush within certain ranges at each of various points along the seam. For aesthetics, however, the uniformity of the gap is also as important because a 'tapered' seam is negatively perceived by human eyes. This paper shows a case study of tolerance design for a refrigerator door system. It presents a step-by-step procedure, which consists of datum flow chain analysis, identification of assembly features, computer modeling of feature tolerances, assembly operations and measurements, tolerance simulation, and tolerance adjustments based on the simulation results. It is found that extra care may need to be used to satisfy the aesthetical criterion for gap uniformity.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.27 no.6
• /
• pp.698-704
• /
• 2013

The purpose of this study is to figure out which acupoints are selected to treat nuchal pain and attempt to analyze the meaning of those acupoints in current clinical trials. We searched ten electronic databases and manually checked related Korean journals and references. We included randomized controlled trials(RCT), clinical controlled trials(CCT), case reports/series, and literature reviews using acupojnts to treat nuchal pain. We investigated the frequency of selected acupoints. We included 31 articles in this study. The most frequently adopted acupoints were GB20(77.41%), followed by GB21(61.29%). In distribution according to meridian system, BL was the most(25.60%), followed by Extra points of Dong-Shi(12.19%). Selected acupoints for treat nuchal pain were considered to be affected by flow of meridian system. It is necessary for more studies to provide clinical guideline of acupoint selection.

• The Journal of Korean Medicine
• /
• v.21 no.4
• /
• pp.138-147
• /
• 2000

Objectives and Method : In this study, I have investigated what kind of primary factors detennine the apoplexy prognosis, and the method of the function assessment about the apoplexy by inquiry into the literature on this subject Results and Conclusions : 1. The primary factors to have an effect upon the appoplexy are : the location of Pungsa; whether five organs ki is existent or not; pulse feeling; tongue condition; whether or not the patient produces stool or urine; for males, the left side; for females, the right side ; whether or not the patient sweats; consciousness; vital signs; and the region and size of disease and brain hernia. 2. MBI is often used because it is considered to be objective, simple, and highly reliable. But its absence of a legal recognition assessment is a major incongruence. 3. Inclusive and standard assessment are key points in the reinforecement by AM of legal recognition assessment, but it takes a lot of time and is not endowed with adding an extra weight and is vague to the division between the communication and social recognition grade. 4. AI is useful and easy to evaluate the mental ability, the capacity for locomotion and the daily activities inclusively.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.2
• /
• pp.173-183
• /
• 1996

In this paper, a new structure that can do fault detection and location of digial logic circuits more efficiently using current testing techniques is proposed. In the conventional method, observation point for steady state power supply current was only one, but in the proposed method more fault classes are divided for fault detection and location through the ovservation of steady state power supply current at two points. Also, it is shown that this structure can be easily applied in detection of stuck-open fault which is not easy to do testing with conventional current testing techniques. In the presented mehtod, an extra trasnistor is used, and current path is made compulsorily in the CMOS circuits in which no current path can be established in steady state, then it can be known that stuck-open tault is in the MOS transistor on the considering current path, if this path disappears due to stuck-open fault. The validity and the effectiveness is shwon, thorugh the SPICE simulation of circuits with fault and the current path search experiment using current path search program based on transistor short model wirtten in C language on SUN sparc workstation.

• Animal cells and systems
• /
• v.13 no.2
• /
• pp.235-245
• /
• 2009

Embryonic stem (ES) cells have a capability to generate all types of cells. However, the mechanism by which ES cells differentiate into specific cell is still unclear. Using microarray technology, the differentiation process in mouse embryonic stem cells was characterized by temporal gene expression changes of mouse ES cells during differentiation in a monolayer culture. A large number of genes were differentially regulated from 1 day to 14 days, and less number of genes were differentially expressed from 14 days to 28 days. The number of up-regulated genes was linearly increased throughout the 28 days of in vitro differentiation, while the number of down-regulated genes reached the plateau from 14 days to 28 days. Most differentially expressed genes were functionally classified into transcriptional regulation, development, extra cellular matrix (ECM),cytoskeleton organization, cytokines, receptors, RNA processing, DNA replication, chromatin assembly, proliferation and apoptosis related genes. While genes encoding ECM proteins were up-regulated, most of the genes related to proliferation, chromatin assembly, DNA replication, RNA processing, and cytoskeleton organization were down-regulated at 14 days. Genes known to be associated with embryo development or transcriptional regulation were differentially expressed mostly after 14 days of differentiation. These results indicate that the altered expression of ECM genes constitute an early event during the spontaneous differentiation, followed by the inhibition of proliferation and lineage specification. Our study might identify useful time-points for applying selective treatments for directed differentiation of mouse ES cells.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.6
• /
• pp.713-721
• /
• 1998

In this paper a new modeling and an optimal pole-placement control for the suspension system of Macpherson type are investigated. The rotational motion of the unsprung mass is emphasized in the new modeling. The two generalized coordinates selected in the new model are the vortical displacement of sprung mass and the angular displacement of control arm. Both variables are measured from their static equilibrium points. It is shown that the conventional model is a special case of the new model since the transfer function of the new model coincides with that of the conventional one if the lower support point of the shock absorber is located at the mass center of the unsprung mass. It is also shown that the resonance frequencies of the new model agree better with experimental results. Therefore, the new model is more general in the sense that it Provides an extra degree of freedom in determining the plant model for control system design. An optimal pole-placement control which combines LQ control and pole-placement technique is applied to the new model. Simulations are provided.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.499-506
• /
• 2013

The accurate estimation of a fault location is desired in distance protection schemes for transmission lines in order to selectively deactivate a faulted line. However, a typical method to estimate a fault location by calculating impedances with voltages and currents at relaying points may have errors due to various factors such as the mutual impedances of lines, fault impedances, or effects of parallel circuits. The proposed algorithm in this paper begins by extracting the fundamental phasor of the positive sequence currents from the three phase currents. The second-order difference of the phasor is then calculated based on the fundamental phasor of positive sequence currents. The traveling times of the waves generated by a fault are derived from the second-order difference of the phasor. Finally, the distance from the relaying point to the fault is estimated using the traveling times. To analyze the performance of the algorithm, a power system with EHV(Extra High Voltage) untransposed double-circuit transmission lines is modeled and simulated under various fault conditions, such as several fault types, fault locations, and fault inception angles. The results of the simulations show that the proposed algorithm has the capability to estimate the fault locations with high speed and accuracy.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.511-535
• /
• 2017

Internet banking is one of many services provided by financial institutions that have become very popular with an increasing trend. Due to the increased amount of usage of the service, Internet banking has become a target from adversaries. One of the points that are at risk of an attack is the login process. Therefore, it is necessary to have a security mechanism that can reduce this risk. This research designs and develops a multi-factor authentication protocol, starting from a registration system, which generates authentication factors, to an actual authentication mechanism. These factors can be categorised into two groups: short term and long term. For the authentication protocol, only three messages need to be exchanged between a client and a financial institution's server. Many cryptographic processes are incorporated into the protocol, such as symmetric and asymmetric cryptography, a symmetric key generation process, a method for generating and verifying digital signatures. All of the authentication messages have been proved and analysed by the logic of GNY and the criteria of OWASP-AT-009. Even though there are additional factors of authentication, users do not really feel any extra load on their part, as shown by the satisfactory survey.

• Korean Journal of Acupuncture
• /
• v.28 no.1
• /
• pp.71-78
• /
• 2011

Objectives : This study is to determine the effects of magnetics therapy on the relief of premenstrual syndrome and dysmenorrhea among female college students. Methods : 20 female college students in a university are selected to the experimental group. All of the subjects have the score of more than 6 on the visual analogue scale for measuring the level of premenstrual pain. The data was collected by using questionnaires. The magnetics therapy on the Dong Shi Acupuncture Therapy extra points (婦科, 還巢, 木婦, 門金) was administered to the experimental group. Results : The results were as follows. The first hypothesis is supported ; the experimental group who received magnetics therapy on the Dong Shi Acupuncture will decrease premenstrual syndrome. The second hypothesis is supported ; the experimental group who received magnetics therapy on the Dong Shi Acupuncture will decrease dysmenorrhea. Conclusions : As a result of this study, magnetics therapy on the Dong Shi Acupuncture will be able to be used as the self care therapy to improve the symptoms of females with the premenstrual syndrome and dysmenorrhea.

• Korean Journal of Social Welfare
• /
• v.47
• /
• pp.34-70
• /
• 2001

Little empirical study has been conducted concerning family resilience of family of children with disabilities. The purpose of this study is to examine the variables that may influence the level of family resilience and family resilience level of family of children with disabilities. This study used the sampled of 363 family of children with disabilities selected from 17 community rehabilitation centers. The measurement of family resilience composed of the base of Walsh(1998)'s theory. And using confirmatory factor analysis, it was confirmed that the scale has three factor such as belief system, organizational pattern and communication process. This study showed that using 5 points scale, mean of belief system is 3.62. And mean of organizational pattern is 3.38 and mean of communication process is 3.73. In identifying predictor of the family resilience, this study used variables from the following aspects: perspective of disability of children, intra-aspect of family, extra-aspect of family. Using Regression analysis, it was found that attitude of family of disability and spouse relationship influenced all sub-aspect of family resilience. Specially, helping of professional influenced belief system, accept of disability influenced organizational pattern. And positive expectation of family of disability influenced communication process. This finding give us significant practical implications for social work intervention & the direction of future research in family resilience.