• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.3
• /
• pp.95-108
• /
• 1993

The needs for smooth curves and surfaces are increasing in modeling cars, ships, airplanes, and other consumer products either for aesthetic or functional purpose. However, the curves and surfaces generated by conventional modeling methods usually exhibit an unwanted behavior due to digitizing errors or inadequate generation method, and thus much time and extra effort is spent afterwards to get the faired results. The objective of this work is to develop a fairing scheme by which well refined shape of a surface can be acquired with detecting and removing the shape imperfections of the given surface represented by NURBS. The fairing scheme is based on an optimization process in which the control points of the given surface are repositioned to minimize the integration of the jumps(perturbations) of the unit normal vectors at all surface points.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.942-952
• /
• 2014

This paper presents a novel test point insertion (TPI) method for a pseudo-random built-in self-test (BIST) to reduce the area overhead. Recently, a new TPI method for BISTs was proposed that tries to use functional flip-flops to drive control test points instead of adding extra dedicated flip-flops for driving control points. The replacement rule used in a previous work has limitations preventing some dedicated flip-flops from being replaced by functional flip-flops. This paper proposes a logic cone analysis-based TPI approach to overcome the limitations. Logic cone analysis is performed to find candidate functional flop-flops for replacing dedicated flip-flops. Experimental results indicate that the proposed method reduces the test point area overhead significantly with minimal loss of testability by replacing the dedicated flip-flops.

• Journal of Haehwa Medicine
• /
• v.22 no.1
• /
• pp.1-10
• /
• 2013

Through a consideration of the contralateral collateral needling(繆刺) from "Neijing", the conclusions are as follows. The contralateral collateral needing is defined as a disordered state, and also as the pricking bloodletting method. Unlike the seasonal deficiency pathogen(虛邪), which are affected by the four seasons, the subject of the contralateral collateral needling is the extra pathogen(奇邪), which is the cause of the extra disease(奇病), therefore the treatment should be different from the general. The contralateral collateral needling is generally used when a pain is generated from the veins(絡) by an external pathogen(邪). However, it can be used as the treatment for an emotional disorder, such as flight or sorrow, or a body constituent(身形) disorder caused by internal parts of the five viscera. Although the contralateral collateral needling(繆刺) and the contralateral meridian needling(巨刺) share the left and right cross treatment(右取左, 左取右) in common, but they are different in every aspect, as the causes, transmutation, location, and feature of disease, relation of qi and blood, and location and method of needling(刺鍼). The medical procedure of the contralateral collateral needling is collateral needling(刺絡) the parts of blood collaterals(血絡) or bruising(痏) well points(井穴) of the end of the both sides of limbs, and using the left and right cross treatment when the former methods are not making any progress. The symptoms of contralateral collateral needling are head, chest, and abdomen pains, and they are treated at the end of the limbs. The bloodletting method(刺絡法), extracting a little amount of blood at well points or blood collaterals, or the collateral vessel pricking therapy(瀉血法), extracting a lot of blood by using cupping(附缸), for example, are contemporary successions of the collateral needling(絡刺), the leopard-spot needling(豹文刺), and the contralateral collateral needling.

• Journal of Haehwa Medicine
• /
• v.9 no.2
• /
• pp.197-209
• /
• 2001

In the Literal Study on the Effect of Acupuncture and Moxibustion Treatment on the Bungru, the results were as follows. 1. The Bungru means an abnormal bleeding of femail genetalia. and is devided to Bungjung and Bungha. 2. The etiological factors of Bungru are heat of blood, asthenic coldness. asthenia of chong and ren channels. deficiency of blood, deficiency of vital energy, stagnated blood. and asthenia of spleen & stomach. 3. In the frequency of practical use in Acupuncture treatment, the order was Ren channel, Bladder meridian. Liver meridian, Spleen meridian and Kidney meridian. 4. In the frequency of practical use in Moxibustion treatment, the order was Extra Points, Ren channel, Bladder meridian, Spleen meridian, Liver meridian and Kidney meridian. 5. The most using points of Acupuncture and Moxibustion Treatment on the Bungru were Samumgyo(Sp6), Taechung(Liv3), Hyoihae(Sp10), Umgok(B10), Kihae(CV6), Chung-guk(CV3), Kwanwon(CV4), Unbaek(Spl) and etc. 6. The charicteristics of the most used points were nourishing the spleen, regulating the middle warmer, cleaning the blood, promoting blood circulation, activating blood circulation, promoting the vital energy, regulating the obstruction of vital energy, nourishing the kidney and so on. 7. In the new Acupuncture therapy, Ear-acupuncture, Head-acupuncture, Foot-acupuncture and Skin-acupuncture were used.

• Journal of Communications and Networks
• /
• v.14 no.1
• /
• pp.21-26
• /
• 2012

As electrocardiogram (ECG) signals are generally sampled with a frequency of over 200 Hz, a method to compress diagnostic information without losing data is required to store and transmit them efficiently on a wireless personal area network (WPAN). In this paper, an ECG signal compression method for communications onWPAN, which uses feature points based on curvature, is proposed. The feature points of P, Q, R, S, and T waves, which are critical components of the ECG signal, have large curvature values compared to other vertexes. Thus, these vertexes were extracted with the proposed method, which uses local extrema of curvatures. Furthermore, in order to minimize reconstruction errors of the ECG signal, extra vertexes were added according to the iterative vertex selectionmethod. Through the experimental results on the ECG signals from Massachusetts Institute of Technology-Beth Israel hospital arrhythmia database, it was concluded that the vertexes selected by the proposed method preserved all feature points of the ECG signals. In addition, it was more efficient than the amplitude zone time epoch coding method.

• Korean Journal of Acupuncture
• /
• v.21 no.2
• /
• pp.177-192
• /
• 2004

Objectives : This study is designed to investigate the pathology, acupuncture and moxibustion therapy applicable of the dementia through literature of oriental medicine. Results : The findings of this study are as follows ; 1. The cause of dementia is internal damage of seven emotions(七情內傷), deficiency of the kidney essence(腎精不足), retention of dampness in the mental(痰迷心竅). 2. The acupuncture meridians used often for dementia are $Tok-maek(GV),\;Chok-t'aeyang\;Pang-gwang-Ky\check{o}ng(BL),\;Chok-yangm\check{o}yng\;Wi-Ky\check{o}ng(ST),\;Su-gwor\check{u}m\;Shimp'o-Ky\check{o}ng(PC),\;Su-so\check{u}m\;Shim-Ky\check{o}ng(HT)$. 3. The spots on the body suiTable for acupuncture used for therapy of the dementia are 98 points and extra points are 6 points, total therapeutic acupunture points are 104 points. And acupunture points are frequently used Shinmun(神門-HT7, 24), Paek'oe(百會-GV20, 19), Chok-samni(足三里-ST36, 18), Sugu(水溝-GV26, 17), P'ungnyung(豊隆-ST40, 16), Taech'u(大椎-GV14, 14), $Sam\check{u}mgyo(三陰交-SP6,\;14)$, Shimsu(心兪-BL15, 14), $Taen\check{u}ng(大陵-PC7,\;11)$, Nogung(勞宮-PC8, 11), Sosang(少商-LU11, 10), Kansa(間使-PC5, 10), Naegwan(內關-PC6, 10). 4. The acupoints used often on moxibustion are Paek'oe(百會-GV20), Chang-gang(長强-GV1), Taech'u(大椎-GV14), Kansa(間使-PC5). Conclusion : It is recommended that further study of many sided investigations in the future.

• Korean Journal of Acupuncture
• /
• v.35 no.4
• /
• pp.210-225
• /
• 2018

Objective : This research is aimed to compare the three sets of Dongin(K-1, K-2, K-3) to Chosun and Chinese acupuncture bronze men, and through literature review of acupuncture points and meridians to see how acupuncture of Chosun affected the Japan's acupuncture bronze men. Methods : Using 3D scanning, we compared the location of acupoints by the proportional bone measurement method of the three sets of Dongin to those of Chosun and China. We also compared the meridians and acupuncture points of the three sets of Dongin to Doningyosodo. Results : Dongin K-1 and K-2 have all the unique characteristics of ChimGuemDongIn. Their heads were made about 30% larger than the location of points by the proportional bone measurement method and their necks were shortened to get the right proportion. Their gender was not specified. Their hands were sticking forward, and knees were slightly bent, and the arms and legs were carefully crafted to record acupuncture points. Dongin K-1 and K-2 marked the meridians and acupuncture points according to Doningyosodo. In particular, BL39 in Dongin K-1 and K-2 has been marked as in ChimGeumDongIn, which is considered to have come from DongUiBoGam. These characteristics do not exist in Chinese acupuncture bronze men. The location of points by the proportional bone measurement method was marked on the right side of the Dongin K-3, while the eight extra meridians were marked on the left side. Conclusions : In summary, Dongin K-1 and K-2 indicate the Japanese history of acupuncture which may have influenced from Chosun.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.7
• /
• pp.144-153
• /
• 1997

The inverse kinematics problem of a reclaimer which excavates and transports raw materials in a raw yard is investigated. Because of the geometric feature of the equipment in which scooping buckets are attached around the rotating disk, kinematic redundancy occurs in determining joint variable. Link coordinates are introduced following the Denavit-Hartenbery representation. For a given excavation point the forward kinematics yields 3 equations, however the number of involved joint variables in the equations is four. It is shown that the rotating disk at the end of the boom provides an extra passive degree of freedom. Two approaches are investigated in obtaining inverse kinematics solutions. The first method pre-assigns the height of excavation point which can be determined through path planning. A closed form solution is obtained for the first approach. The second method exploits the orthogonality between the normal vector at the excavation point and the z axis of the end-effector coordinate system. The geometry near the reclaiming point has been approximated as a plane, and the plane equation has been obtained by the least square method considering 8 adjacent points near the point. A closed form solution is not found for the second approach, however a linear approximate solution is provided.

• Korean Journal of Acupuncture
• /
• v.34 no.4
• /
• pp.231-240
• /
• 2017

Objectives : This study was designed to establish the basis for expanding the indications for Blood-letting therapy by reviewing the contents recorded in the Zhenjiudacheng. Methods : Articles associated with the Blood-letting therapy were categorized according to the factors such as the characteristics of the treatment site, the used instruments, the caution, the side effects, the diseases, the acupoints, etc. Results : 1. The characteristics of treatment site were the red, purple, purplish red, purplish black color and the localized collection of fibrous exudate. 2. There were several instruments used for Blood-letting therapy; Samreongchim, Sochim, Loguan, Stone needle, Jukyeop, etc. 3. Several cautions and side effects of the Blood-letting therapy were recorded in the Zhenjiudacheng. 4. The Blood-letting therapy could be performed for a broad spectrum of symptoms such as headaches, backaches, schizophrenia, hyperemia, etc. 5. Not only acupoints but also extra points were used for blood-Letting therapy. 6. In addition to the usual Blood-letting region, Blood-letting therapy was performed directly on the pathologic site and pathologic reaction site. Conclusions : In the Zhenjiudacheng, Blood-letting therapy was described in a concrete and substantive manner in order to enable practical clinical application.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.5
• /
• pp.11-19
• /
• 2012

The main function of fuel cell manifold is to render reactants distribution as uniform as possible into a fuel cell stack. The purpose of this study is to numerically investigate the effects of stack manifold design on reactants distribution within a fuel cell stack. Four manifold designs with different manifold entrance shapes (expansion or diffuser) and different values of the extra width between the cell outer channel and manifold side wall are considered and applied to the fuel cell stack consisting of 50 cells. Since the fuel cell stack geometry involves several millions of grid points for numerical calculations, a parallel computing methodology is employed to substantially reduce the computational time and overcome the memory requirement. The numerical simulations are carried out and calculated results clearly demonstrate that both the manifold entrance shape and extra width have a substantial influence on manifold performance, controlling the degree of flow separation and entrance length for fully developed flow in the manifold channel. Finally, we suggest the optimum design of fuel cell manifold based on the simulation results.