• 한국수소및신에너지학회논문집
• /
• 제16권4호
• /
• pp.324-333
• /
• 2005

The kinetics of external hydrogen embrittlememt is considered. The equation of the crack growth rate (CGR) is derived from modification of the model developed by Wilkinson and Vitek. After calculation of hydrogen pressure build-up in the void, the effect of the internal hydrogen pressure on the void growth is added. The CGR is expressed by two terms. One is the term dependent on the critical stress, which is exactly same as Wilkinson and Vitek. The other is term dependent on the pressure of the hydrogen in void.

• 설비공학논문집
• /
• 제24권9호
• /
• pp.671-678
• /
• 2012

The objective of this study is to analyze theoretically the performance of an open air-cycle refrigeration system in which environmental concerns increase. The pressure ratio of the external compressor and efficiencies of the components that compose of the system are selected as important parameters. As the pressure ratio of the external compressor increases, the pressure ratio of the ACM compressor is determined high, the refrigerating temperature and capacity increase, the COP decreases, and the total entropy production rate increases. The effect of heat exchanger effectiveness and turbine efficiency on the performance are greater than that of the ACM compressor efficiency. Also the performance of the air-cycle refrigeration system with two heat exchangers has been enhanced like high COP and low total entropy production rate, compared to the system with one heat exchanger.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.97-99
• /
• 2012

A pressure-based BOIK model considering Shock to Detonation Transition(SDT) and damage due to external fragment or bullet stimuli impact on energetic materials and analytical approach for determination of free parameters are proposed. The rate of product mass fraction(${\lambda}$) consists of ignition term that represents the initiation due to shock compression and growth term that describes propagation of detonation wave and strain term representing the morphological deformation induced by external impact.

• Wind and Structures
• /
• 제32권2호
• /
• pp.105-114
• /
• 2021

This paper describes a wind tunnel test on a 1:25 scale model of TTU building with several adjustable openings in order to comprehensively study the characteristics of fluctuating internal pressures, especially the phenomenon of the increase in fluctuating internal pressures induced by tangential flow over building openings and the mechanism causing that. The effects of several factors, such as wind angle, turbulence intensity, opening location, opening size, opening shape and background porosity on the fluctuating internal pressures at oblique wind angles are also described. It has been found that there is a large increase in the fluctuating internal pressures at certain oblique wind angles (typically around 60° to 80°). These fluctuations are greater than those produced by the flow normal to the opening when the turbulence intensity is low. It is demonstrated that the internal pressure resonances induced by the external pressure fluctuations emanating from flapping shear layers on the sidewall downstream of the windward corner are responsible for the increase in the fluctuating internal pressures. Furthermore, the test results show that apart from the opening shape, all the other factors influence the fluctuating internal pressures and the internal pressure resonances at oblique wind angles to varying degrees.

• 한국데이타베이스학회:학술대회논문집
• /
• 한국데이타베이스학회 2002년도 추계 컨퍼런스: 기업경쟁력 강화를 위한 디지털 컨텐츠 및 정보기술 컨퍼런스
• /
• pp.252-293
• /
• 2002

Increasing Administrative Complexity. External Pressure for Efficiency. Internal Pressure for Effectiveness. Workers want: - more reward - Less stress. (omitted)

• International Journal of Aeronautical and Space Sciences
• /
• 제18권4호
• /
• pp.807-815
• /
• 2017

For liquid rocket engine(LRE)-based space launch vehicles, longitudinal instability, often referred to as the pogo phenomenon in the literature is predicted. In the building block of system-level task, accurate dynamic modeling of a fluid-filled tank is an essential. This paper attempts to apply the virtual mass method that accounts for the interaction of the vehicle structure and the enclosed liquid oxygen to LOX-filled tanks. The virtual mass method is applied in a modal analysis considering the hydroelastic effect of the launch vehicle tank. This method involves an analysis of the fluid in the tank in the form of mass matrix. To verify the accuracy of this method, the experimental modal data of a small hemispherical tank is used. Finally, the virtual mass method is applied to a 1/8-scale space shuttle external tank. In addition, the LOX tank bottom pressure in the external tank model is estimated. The LOX tank bottom pressure is the factor required for the coupling of the LOX tank with the propulsion system. The small hemispherical tank analysis provides relatively accurate results, and the 1/8-scale space shuttle external tank provides reasonable results. The LOX tank bottom pressure is also similar to that in the numerical results of a previous analysis.

• 한국항행학회논문지
• /
• 제26권6호
• /
• pp.464-473
• /
• 2022

본 논문에서는 자율무인잠수정에 사용되는 UHF-GPS 안테나의 성능을 만족하는 경량화 설계에 대해 제안하였다. 설계 프로세스에 사용된 구조해석, 수밀외압시험 그리고 비파괴 검사는 수중운용 환경에서 발생하는 외력에 대한 구조 안전성을 고려하여 결정하였다. 먼저 수상에서 모함과 통신을 위한 UHF-GPS 안테나 성능과 수중 운용 시 발생하는 20 bar 압력을 고려한 레이돔 재질을 선정하였으며, 전자기장해석 및 구조해석을 수행하여 무게 대비 강도 및 강성이 높고 유전율이 우수한 PA-GF 소재를 선정하였다. 그리고 UHF-GPS 안테나의 요구 중량을 만족하기 위한 레이돔 두께별 전자기장해석 및 구조해석을 추가 수행하였으며, 최종 모델 선정 후 수밀외압시험 및 비파괴 검사를 통해 구조 안전성을 검증하였다.

• 한국컴퓨터정보학회논문지
• /
• 제15권9호
• /
• pp.155-164
• /
• 2010

지금까지 EDI의 연구는 EDI 도입과 성과에 초점이 맞추어져 왔다. 그러나 최근 EDI의 확산에 관한 연구가 증가하고 있다. 이 연구의 목적은 첫째, EDI 확산의 여러 요인을 찾고, 두 번째 EDI 확산 요인과 EDI 확산 정도와의 관계를 밝혀보고자 한다. 이러한 목적을 달성하기 위해 본 연구에서 채택된 두가지 방법론은 첫째, 선행연구들을 폭넓게 분석하여 모델을 구축하는 것이며, 둘째 EDI 확산요인을 탐색하는 실험적 연구방법이다. 본 연구가설을 검증한 결과 첫째, EDI 내부확산에 영향을 미치는 중요한 변수들은 최고경영자의 지원, 업무범위, 정보기반, 적합성, 복잡성, 상대적 이익, 경쟁정도, 거래상대방 압력을 들 수 있고, 둘째 EDI의 외부확산에 영향을 미치는 주요 변수들은 최고 경영자의 지원, 업무범위, 정보기반, 적합성, 상대적 이익, 경쟁정도, 거래상대방 압력 이다. 최고경영자의 지원, 업무 범위, 정보기반, 적합성, 상대적 이익, 경쟁 정도 그리고 거래상대방 압력이 EDI 내부확산과 외부확산에 동시에 영향을 미치는 것을 알 수 있다.

• 한국가스학회지
• /
• 제15권6호
• /
• pp.14-19
• /
• 2011

원주 방향의 두께가 불균일한 해저배관에 대한 건전성을 검토하기 위하여 수압에 의한 소성붕괴 저항성을 평가하였다. 본 연구에서는 해저배관에 부가되는 주하중을 수압으로 설정하여 4, 8, 12 및 16%의 두께편차율을 갖는 API 5L X65와 API 5L X80 배관의 소성붕괴압력 변화에 미치는 영향을 유한요소해석을 통하여 평가하였다. 두께 편차율이 증가하면 소성붕괴압력이 감소하며 두께편차율이 동일하면 직경대 두께비가 증가함에 따라 소성붕괴 압력은 감소한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권6호
• /
• pp.711-729
• /
• 2018

This paper reports on the experimental investigations on the failure modes of ring-stiffened cylinder models subjected to external hydrostatic pressure. Nine models were welded from general structural steel. The shells were initially formed by cold-rolling, and flat-bar ring frames were welded to the shell. The hydrostatic pressure tests were conducted by using water as the medium in pressure chambers. The details of the preparation and main test were briefly explained. The investigation identified the consequence of the structural failure modes, including: shell yielding, local shell buckling between ring stiffeners, overall buckling of the shell together with the stiffeners, and interactive buckling mode combining local and overall buckling. In addition, the ultimate strengths were predicted by using existing design codes. Non-linear numerical computations were also conducted by employing the actual imperfection coordinates. Finally, accuracy and reliability of the predictions of design formulae and numerical were substantiated with the test results.